From OpenSCADAWiki
Jump to: navigation, search

The page contains electronic parts of low level busses and related ones used by the project OpenSCADA for their adaption in some solutions and just for their protocols support in the standard library of OpenSCADA. Then the page represents a fund of electronic parts of the project OpenSCADA.

Model Description Depository-state,
allowed (in whole)
Risings
Implementation
Generic IO or DIO
PCF8574 8DIO, Module, I2C 0 (1)
  • (+) Connect to the LCD1602 and adapt into OpenSCADA.
  • (+) Connect to Raspberry Pi and OpenSCADA as DIO for test and try.
DS2413 2DIO, Dallas1Wire 2 (+) Connect to OpenSCADA and test.
DS2408 8DIO, Dallas1Wire 1 (+) Connect to OpenSCADA and test.
AI or ADC, AO or DAC
PCF8591 4xADC 1xDAC 8Bit, I2C 1
  • (+) Try connect and test on Raspberry Pi.
  • Use for AC power measurer on Orange Pi Zero
DS2450 4xADC 1...16Bit, Dallas1Wire 1 (+) Connect to OpenSCADA and test.
ADS1115 4xADC 16Bit, Module, I2C 1
+1x2.41$
(+) Connect to OpenSCADA and test.
ADS1015 4xADC 12Bit, Module, I2C 1
+1x2.16$
(+) Connect to OpenSCADA and test.
MCP4725 DAC 12Bit, Module, I2C 1
+1x2.18$
(+) Connect to OpenSCADA and test.
YL-40 4xADC 1xDAC 8Bit, PCF8591, Module, I2C 5
+5x1.1$
AD9833 Sine, square wave DDS generator, Module, I2C 1
+1x2.66$
Connect to OpenSCADA and test.
Sensors
LM35 Temperature, Analog 9 (+) Connect to Raspberry Pi through PCF8591 for test and try.
LM335 Temperature, Analog 1 (+) Connect to Raspberry Pi through PCF8591 for test and try.
DS18B20 Temperature, Dallas1Wire 13(26)
+10x5.85$
  • (+) Direct wiring on 1-Wire bus.
  • (+) Connect to OpenSCADA and test.
DS18B20P Temperature, Dallas1Wire 1 (+) Connect to OpenSCADA and test.
GY-906, MLX90614ESF Temperature Contactless, Module, I2C 1
+1x4.59$
Connect to OpenSCADA and test.
HR202L Humidity Capacity 2 Connect to Raspberry Pi for test and try.
DHT11 Humidity + Temperature, Specific1Wire 1 (+) Connect to Raspberry Pi and OpenSCADA for test and try.
AM2320 Humidity + Temperature, Specific1Wire 0 (1)
  • (+) Some optimization and expanding of JavaLikeCalc of OpenSCADA for its acquisition procedure move to DAQ templates.
  • (+) Connect to Raspberry Pi and OpenSCADA for test and try.
SHT30, SHT30-D Humidity + Temperature, Module, I2C 1
+1x4.02$
Connect to OpenSCADA and test.
BMP180 Barometric Pressure + Temperature + Altitude, Module, I2C 0 (1)
BMP280 Barometric Pressure + Temperature + Altitude, Module, I2C 1x1.06$
GY-BME280-3.3 Barometric Pressure + Temperature + Altitude + Humidity, Module, I2C+SPI 1x1.03$
GY-511 E-Compass 3 Axis Accelerometer + 3 Axis Magnetometer, Module, I2C 1x4.44$ Connect to OpenSCADA and test.
MQ2 Gas Module Analog 1 (+) Direct connect and test by the LED.
MQ3 Alcohol Ethanol Gas, Module, Analog 1
+1x1.31$
(+) Direct connect and test by the LED.
MQ5 Methane Natural Gas, Module, Analog 1
+1x1.3$
  • Cook room diagnostic.
  • (+) Direct connect and test by the LED.
MQ7 Carbon Monoxide CO Gas, Module, Analog 1
+1x1.34$
(+) Direct connect and test by the LED.
E18-D50NK Reflective Infrared Switch Sensor (adjustable) with Transistor Output (NPN) 1x3.84$ (+) Acceptable testing
GUVA-S12SD Solar Ultraviolet Intensity Sensor 240nm-370nm, 2.5V-5V 1x2.66$ (+) Acceptable testing
E18-D50NK Reflective Infrared Switch Sensor (adjustable) with Transistor Output (NPN) 1x3.84$ (+) Acceptable testing
TCRT5000 Reflective Infrared Sensor and module with Transistor Output 1+1(module)
+1x0.62$
  • Smart-house point: Data gather from old fashion resource counters by its mechanical ticks count.
APDS-9930 Proximity + Gesture + Posture + RGB, Module, I2C 1
+1x1.61$
  • Smart-house point: Data gather from old fashion resource counters by its mechanical ticks count.
  • Develop a test board with the counter adjusting and indication.
RCWL-0530 MAX30102 Low Power Heart Rate Oxygen Pulse, Module 1
+1x4.8$
Acceptable testing
Biosensor Pulse Heart Rate Module Detector Board, 3.3V, 5V 1
+1x1.6$
  • Smart-house point: Data gather from old fashion resource counters by its mechanical ticks count.
GY-30, BH1750FVI Optical intensity illumination, Module, I2C 1
+1x1.28$
Connect to OpenSCADA and test.
GY-530, VL53L0X DistanceLaser, Module, I2C 1
+1x10.49$
Connect to OpenSCADA and test.
YF-S201 Water Flowmeter 1-30L/min 1
+1x2.56$
(+) Connect to sources for measure
YF-S201C Water Flowmeter 1-30L/min 4 stars transparent 1
+1x3.45$
(+) Connect to sources for measure
HC-SR501 Motion adjust Infrared IR Pyroelectric Infrared PIR, Module 1
+1x0.79$
(+) Acceptable test
HC-SR505 Mini Infrared PIR Motion Sensor Precise Infrared Detector, Module 1
+1x1.28$
(+) Acceptable test
RCWL-0516 Microwave Radar Sensor, Human Body Sensor, Module 1
+1x1.17$
(+) Acceptable test
AM312 Mini Infrared PIR Motion Sensor Precise Infrared Detector, Module 1
+1x1.43$
(+) Acceptable test
LM393 Comparing Foto-resistive + humidity + etc., Module 1 (+) Direct connect and test by the LED.
52mm PP Liquid Water Level Sensor Horizontal Float Switch Down 1 (+) Acceptable testing
JSN-SR04T Ultrasonic Distance Measuring, Module, Waterproof 1
+5.8$
(+) Acceptable testing
YL-100 Analog Resistive Soil Hygrometer Detection, Module 2
+2x0.8$
(+) Acceptable testing
Analog Capacitive Soil Hygrometer Detection, Module 1
+1x1.8$
(+) Acceptable testing
Microcontrollers
TinyRTC Real-time clock DS1307 + memory AT24C32, Module, I2C 1
+1x0.59$
(+) Try to connect to OpenSCADA and to test on Raspberry Pi.
ZS-042 Real-time clock DS3231 + memory AT24C32, Module, I2C 1 (+) Try to connect to OpenSCADA and to test on Raspberry Pi.
CS5460A Single-phase Bi-directional Power Energy Metering Module Chip With AC / DC System 1
+1x2.2$
Acceptable testing
AT89C4051 8051 compatible microcontroller. 11
ATtiny85 Micro USB Development Board, Module 1
+1x1.4$
Acceptable testing
ATMEGA8 USBASP USBISP AVR Programmer USB ATMEGA128 ATtiny/CAN/PWM, Module 1
+1x1.7$
Acceptable testing
STM8S103F3P6 STM8 Minimum System Development Board, Module 1
+1x1.0$
Acceptable testing
STM32F103C8T6 ARM STM32 Cortex-M3 Minimum System Development Board, Module 1
+1x2.1$
Acceptable testing
CH340 Nano V3.0 Mini USB ATmega328 Atmega328P, 5V, 16M, Micro-controller Board, CH340G, MEGA328 1
+1x2.78$
(+) Acceptable testing
NodeMcu V3 ESP8266 + CH340 MicroController WiFi + USB + Serial, Module 1
+1x2.88$
(+) Acceptable testing
ESP-12F ESP8266 MicroController WiFi + Serial, Module 1
+1x1.76$
(+) Acceptable testing
Serial converters
CH341A Serial module USB to SPI, I2C, IIC, UART, TTL 1
+1x9.13$
  • Using for different debug and experiments
  • Acceptable testing
6 in 1 CP2102 Serial module USB to TTL 485 232, 3.3V / 5V 1
+1x4.77$
  • (+) Using for different debug and experiments
  • (+) Acceptable testing
USB to TTL Serial module USB to TTL 3.3V / 5V CH340G 1
+1x0.89$
  • (+) Using for different debug and experiments
  • (+) Acceptable testing
USB to TTL Serial module USB to TTL 3.3V / 5V PL2303HXA 1
+1x0.77$
  • (+) Using for different debug and experiments
  • (+) Acceptable testing
USB to TTL adapter module Serial adapter module USB to TTL 3.3V / 5V STC CP2102 1
+1x1.08$
  • (+) Using for different debug and experiments
  • (+) Acceptable testing
USB to RS485 Serial module USB to RS485 2
+2x0.9$
  • (+) Using for different debug and experiments
  • (+) Acceptable testing
USB to RS485 Industrial serial module USB to RS485 1
+1x2.57$
  • (+) Using for different debug and experiments
  • (+) Acceptable testing
CJMCU-1051 TJA1051 High Speed CAN Transceiver, Module, 3V-5V 1
+1x1.09$
  • Acceptable testing.
TTL to RS485, Module 1
+1x0.38$
Displays, cameras and other like ones
TM1637 0.36" 4-Digit LED Display, Tube Decimal, 7 Segments, 30x14mm 1
+1x1.10$
  • Connect to OpenSCADA through the GPIO.
  • Initial connection to RPi3 and test.
1602A Text 40x2 Parallel HD44780 1
  • (+) Some optimization of JavaLikeCalc of OpenSCADA and expanding for its acquisition procedure move to DAQ templates.
  • (+) Expand the OpenSCADA module DAQ.BCM2835 for direct functions. Profile and try some optimization of this different access ways.
  • (+) Append to OpenSCADA a new module based on bcm2835 library and check that now.
  • (+) Connecting and test on Raspberry Pi by the Python script.
OLED-091 0.91" 128x32 Blue/White OLED LCD Display, IC SSD1306, I2C 1
+1x2.30$
  • Connect to OpenSCADA.
  • Initial connection to RPi3 and test.
LCD Touch Screen+Stylus 3.5" (320x480) RPi LCD TFT Touchscreen Display Touch Shield SPI. 1
+1x12.11$
  • SmartHome and Industrial terminal work out.
  • (+) Initial connection to RPi3 and test.
Camera 5MP Focal Adjustable Night Vision RPi 1
+1x11.96$
(+) Initial connection to RPi3 and test.
A6 GSM GPRS Module, TTL/RS232, With Antenna 1
+1x5.92$
  • Connection through RPi, OrPi.
  • Full connection to the network: PPP doesn't work
  • (+) Initial connection
SIM800C GPRS GSM Smallest Module MicroSIM Card TTL Serial Port 1
+1x4.79$
  • Connection through RPi, OrPi.
  • Test for Bluetooth.
  • Full connection to the network: PPP doesn't work
  • (+) Initial connection
HC-05 30ft Wireless Bluetooth RF Transceiver Module, Serial, RS232, TTL 1
+1x3.42$
  • Connection through RPi, OrPi.
  • (+) Initial connection.
ZS-040 BLE Bluetooth 4.0 Replace HM-10 CC2540 CC2541 Transceiver Module, Serial, TTL 2
+1x2.3$
  • Update the firmware and test on the manual
  • (+) Initial connection.
HW-237 2.4G 1100 Meters Long Distance NRF24L01+PA+LNA Wireless Communication, Module, SPI 2
+2x2.0$
  • Initial connection by SPI.
RC522 Kits S50 RFID Kit Module 2
+2x3.19$
  • Connect to OpenSCADA by SPI and test.
  • (+) Initial connection
PN532 NFC RFID Wireless Module V3, Reader, Writer Mode, IC S50 by I2C, SPI, HSU 1
+1x4.61$
  • Connect to OpenSCADA by I2C, HSU, SPI and test.
  • Initial connection
GY-NEO6MV2 NEO-6M GPS Module, NEO6MV2, APM2.5, Flight Control EEPROM, MWC, Micro USB 3.3V, Ceramic Antenna 1
+1x5.93$
  • Connect to OpenSCADA for the data acquisition.
  • (+) Initial connection
AC/DC to DC converters
LM317T DC-DC Linear Adjustable Voltage 4.2-40V To 1.2-37V, Board Module 2x1.10$ (+) Initial connection and test.
DSN5000, XL4005 DC-DC Step Down 5-32V to 0.8-24V 5A Effectivity 90% 1 (burned)
  • (+) Embed to the laboratory power supply as a second voltage source — burned by the continual inductive load or over-voltage.
  • (+) Initial connection and test.
HW-411, LM2596 DC-DC Step Down 3.2V-40V to 1.25-35V 5A Effectivity 92% 1x0.67$ (+) Initial connection and test.
XH-M401 DC-DC Step Down 4V-40V to 1.25-36V 8A Effectivity 94% 1x2.76$
  • Embed to the laboratory power supply.
  • (+) Initial connection and test.
CN4015-2, XL4015 DC-DC Step Down Buck Charging Board 5-32V to 0.8-30V 5A Effectivity 95% 1
  • Embed to the universal accumulators charger.
  • (+) Initial connection and test.
LM2596 DC-DC Step Down Buck Charging Board 5-35V to 1.25-30V 4A Effectivity 92% 1x1.26$
  • Embed to the universal accumulators charger.
  • (+) Initial connection and test.
DC-DC Step Down 12-24V to 5V 3A (1.8 ... 12V) Effectivity 97.5%, Mini 5
+5x3.63$
(+) Initial connection and test.
SX1308 DC-DC Step Up Circuit Board 2...24V to 2...28V 2A Effectivity 95% 1
+1x0.64$
(+) Initial connection and test.
DC-DC Step Up Circuit Board 0.9V to 5V 0.6A 1 (+) Initial connection and test.
DC-DC Step Up Circuit Board 3.8...32V to 1.25...35V 3A Effectivity 94% 1 (+) Initial connection and test.
DC-DC Step Up Circuit Board 3V(1...5V) to 5V 1A Effectivity 96%, Ultra Small 1
+1x1.06$
(+) Initial connection and test.
AC-DC ~220V(100...240) to 5V 2A (10W) isolated Effectivity 80% 1
+1x1.2$
(+) Initial connection and test.
AC-DC ~220V(85...265) to 12V 500mA (6W) isolated Effectivity 80% 1
+1x1.58$
(+) Initial connection and test.
AC-DC ~220V(85...265) to 5V 700mA (3.5W) isolated Effectivity 80% 2 (4)
+0.99$
+1.07$
(+) Initial connection and test.
HLK-PM01 AC-DC ~220V(100...240) to 5V 600mA (3W) isolated 1x2.08$ (+) Initial connection and test.
AC-DC ~220V(85...265) to 5V 1000mA (5W) isolated 1x1.79$ (+) Initial connection and test.
Relays
SRD05VDC-SL-C5VDC Relay 5V Mechanical 1 (+) Simple powering and testing.
2xRelay 5V 250V2A Module SolidState "OMRON G3MB-202P" 1
+1x2.6$
(+) Simple powering and testing.
Relay 5V 250V2A Module SolidState "OMRON G3MB-202P" 1
+1x1.34$
(+) Simple powering and testing.
Motors
DC 2.5-6V Mini Submersible Pumps DC Motor Pump 80-120L/H Micro Brushless Magnetic Driving Pump 1x1.49$ (+) Simple powering and testing.
Different ones
Laser 3V 1 (+) Simple powering and testing.
Coin Flat Vibrating Micro Motor DC 3V 8mm 3
+3x0.57$
(+) Simple powering and testing.
ZMCT103C AC Current 5A Single-Phase 2
+1.61$
+0.54$
(+) Acceptable test
TEC1 12704 12V 4A TEC Thermoelectric Cooler Peltier 1
+1x3.43$
(+) Initial connection for test.