From OpenSCADAWiki
Parameters
Identifier | Parameter | Type | Mode | Hidden | Default |
---|---|---|---|---|---|
Fi1 | Input 1 flow, ton/h | Real | Input | false | 20 |
Pi1 | Input 1 pressure, at | Real | Input | false | 1 |
Ti1 | Input 1 temperature, K | Real | Input | false | 20 |
Si1 | Input 1 cutset, m2 | Real | Input | false | 1 |
li1 | Input 1 length, m | Real | Input | false | 10 |
Q0i1 | Input 1 norm density, kg/m3 | Real | Input | false | 1 |
Kpr1 | Input 1 coefficient of the compressibility [0...1] | Real | Input | false | 0.9 |
Ci1 | Input 1 heat capacity | Real | Input | false | 1 |
Fi2 | Input 2 flow, ton/h | Real | Input | false | 20 |
Pi2 | Input 2 pressure, at | Real | Input | false | 1 |
Ti2 | Input 2 temperature, K | Real | Input | false | 40 |
Si2 | Input 2 cutset, m2 | Real | Input | false | 1 |
li2 | Input 2 length, m | Real | Input | false | 10 |
Q0i2 | Input 2 norm density, kg/m3 | Real | Input | false | 1 |
Kpr2 | Input 2 coefficient of the compressibility [0...1] | Real | Input | false | 0.9 |
Ci2 | Input 2 heat capacity | Real | Input | false | 1 |
ki | Heat transfer coefficient | Real | Input | false | 0.9 |
Fo1 | Output 1 flow, ton/h | Real | Input | false | 0 |
Po1 | Output 1 pressure, at | Real | Output | false | 1 |
To1 | Output 1 temperature, K | Real | Output | false | 273 |
So1 | Output 1 cutset, m2 | Real | Output | false | 1 |
lo1 | Output 1 length, m | Real | Output | false | 10 |
Fo2 | Output 2 flow, ton/h | Real | Input | false | 0 |
Po2 | Output 2 pressure, at | Real | Output | false | 1 |
To2 | Output 2 temperature, K | Real | Output | false | 273 |
So2 | Output 2 cutset, m2 | Real | Output | false | 1 |
lo2 | Output 2 length, m | Real | Output | false | 10 |
f_frq | Calculation frequency, Hz | Real | Input | false | 200 |