From OpenSCADAWiki
| Acquisition and control of internal and external data (DAQ) | |
|---|---|
| Different types of logical and physical sources that have data access utilities or accessible through simple and specialized network protocols. This is accomplished by writing a data acquisition procedure of the user protocol in the user programming language | Module of the user programming language JavaLikeCalc Module LogicLev Module of the user protocol UserProtocol |
| Formation of logical sources and derivative parameters structures, based on templates of parameters and data of other sources | Module LogicLev |
| Formation of logical sources using block diagrams | Module BlockCalc |
| External servers and PLCs are built on OpenSCADA, possibly for duplication. | Module DAQGate |
| Information about hardware and software platform | Module System |
| Industrial controllers and other devices by the ModBus protocol | Module ModBus |
| Industrial controllers by the DCON protocol | Module DCON |
| Industrial controllers and other devices by the OPC-UA protocol | Module OPC-UA |
| Industrial controllers and other devices by the MMS(IEC-9506) protocol | Module MMS |
| Network devices and other sources by the SNMP protocol (Simple Network Management Protocol) | Module SNMP |
| Industrial equipment of the firm ICP DAS, modules of the series: I7k, I8k, I87K and other on the ISA bus | Module ICP_DAS |
| Industrial controllers of the firm Siemens of the series S7 | Module Siemens |
| DAQ-boars of Diamond Systems | Module DiamondBoards |
| DAQ-boars on the buses ISA, PCI, PCMCIA and USB | Library Comedi Module Comedi |
| Input channels of the sound controllers | Module SoundCard |
| Automation of the "Big Dutchman" company | Module BFN |
| Discrete inputs/outputs of general purpose of different single-board computers | Module GPIO |