From OpenSCADAWiki
Enter a message name below to show all available translations.
Found one translation.
| Name | Current message text |
|---|---|
| h English (en) | {{CntHdr|Configuring and using}} :1. Create and start [[Special:MyLanguage/Modules/LogicLev|a logical controller object]] or use any present one with need scheduling properties. :2. Create [[Special:MyLanguage/Modules/LogicLev|a logical parameter object]] and select this template for it, one for each the devices in the active mode or one for whole devices in the RS422 network for the passive mode — enable the parameter. :3. Into the tab "Template configuration" of the logical parameter object you need to set: :* ''Transport'' — to the address of the automatically created transport with its parameters after ":", according to [[Special:MyLanguage/Documents/User_API#SYSTransport|the function SYS.Transport.outAt() address format]]. :* ''Device address [0...255], and -1 for the passive mode'' — set here the corresponded device address for the active mode or -1 for the passive mode. :* ''Reconnection time, data missing for passive'' — in time of detection the data missing for reconnection in the passive filtering mode. :* ''Time of missing the machine data to set EVAL'' — in time of detection the machine data missing for marking its attributes to EVAL in the passive filtering mode. :4. RESULT: The logical parameter object will perform interaction and placing of gathered data to the parameter attributes. |