From OpenSCADAWiki
Jump to: navigation, search
(Importing a new version from external source)
(Importing a new version from external source)
 
Line 1: Line 1:
 
Currently ACL is supported by:
 
Currently ACL is supported by:
−
* the [[#CfgDAQ|DAQ subsystem]] for Controller and Parameter Objects, DAQ-Templates and by the [[Special:MyLanguage/Modules/OPC_UA|OPC-UA module]] in the protocol part for checking permition of the authenticated user, where:
+
* the [[#CfgDAQ|DAQ subsystem]] for Controller and Parameter Objects, DAQ-Templates, [[Special:MyLanguage/Modules/JavaLikeCalc|JavaLikeCalc Functions]], most DAQ-Modules and by the [[Special:MyLanguage/Modules/OPC_UA|OPC-UA module]] in the protocol part for checking permition of the authenticated user, where:
 
** ''Rd (04)'' — reading both the Control Nodes and the Parameter Attributes;
 
** ''Rd (04)'' — reading both the Control Nodes and the Parameter Attributes;
 
** ''Wr (02)'' — writing (also creating and removing) the Control Nodes;
 
** ''Wr (02)'' — writing (also creating and removing) the Control Nodes;
 
** ''Xt (01)'' — execution-writing to the Parameter Attribute.
 
** ''Xt (01)'' — execution-writing to the Parameter Attribute.

Latest revision as of 20:42, 15 April 2025

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Documents/Program manual)
Currently ACL is supported by:
* the [[#CfgDAQ|DAQ subsystem]] for Controller and Parameter Objects, DAQ-Templates, [[Special:MyLanguage/Modules/JavaLikeCalc|JavaLikeCalc Functions]], most DAQ-Modules and by the [[Special:MyLanguage/Modules/OPC_UA|OPC-UA module]] in the protocol part for checking permition of the authenticated user, where:
** ''Rd (04)'' — reading both the Control Nodes and the Parameter Attributes;
** ''Wr (02)'' — writing (also creating and removing) the Control Nodes;
** ''Xt (01)'' — execution-writing to the Parameter Attribute.
TranslationCurrently ACL is supported by:
* the [[#CfgDAQ|DAQ subsystem]] for Controller and Parameter Objects, DAQ-Templates, [[Special:MyLanguage/Modules/JavaLikeCalc|JavaLikeCalc Functions]], most DAQ-Modules and by the [[Special:MyLanguage/Modules/OPC_UA|OPC-UA module]] in the protocol part for checking permition of the authenticated user, where:
** ''Rd (04)'' — reading both the Control Nodes and the Parameter Attributes;
** ''Wr (02)'' — writing (also creating and removing) the Control Nodes;
** ''Xt (01)'' — execution-writing to the Parameter Attribute.

Currently ACL is supported by:

  • the DAQ subsystem for Controller and Parameter Objects, DAQ-Templates, JavaLikeCalc Functions, most DAQ-Modules and by the OPC-UA module in the protocol part for checking permition of the authenticated user, where:
    • Rd (04) — reading both the Control Nodes and the Parameter Attributes;
    • Wr (02) — writing (also creating and removing) the Control Nodes;
    • Xt (01) — execution-writing to the Parameter Attribute.
Retrieved from "http://oscada.org/wiki/index.php?title=Translations:Documents/Program_manual/695/en&oldid=91102"