The industrial devices library of the DAQ-source templates is appended for a template of the ModBus base

ModBus base template of the protocol implementing on the Logical Level. Designed mostly to use in the base of creation specific ModBus-based protocols for the standard-part registers' access (function 3 for reading and function 16 for writing) and appending the new protocol specific part. The template was designed to work both under control of the controller objects of the module ModBus and LogicLev and can be managed from the template of the initiative connections processing for assigned output transports.

Total complexity: 0.5 HD

Sponsored by, for whole complexity: Elyor Turaboev, BLUE STAR GROUP Ltd

Категория:

ВТОРОЕ обновление промышленного релиза OpenSCADA 0.9 LTS

Обновление 0.9.2 (17.08.2020) к промышленному релизу продолжительного времени поддержки (LTS) предназначено для обновления существующих установок промышленной версии с целью исправления известных проблем и некоторых улучшений с предоставлением оперативных сервисных обновлений пользователям, подписанным на техническую поддержку.

В целом, обновление исправляет около 60 ошибок и добавляет некоторые улучшения...[подробнее]

Категория:

Ревизия пакетов и СОГЛАШЕНИЯ Технической Поддержки OpenSCADA

Пакеты Технической Поддержки были значительно отревизированы на предмет чёткого определения их стоимости от разработчиков OpenSCADA, определения общей эквивалентной трудоёмкости, добавления рабочей "Work" ветви к поддержке и некоторых других небольших исправлений.

СОГЛАШЕНИЕ о Технической Поддержке было целиком отревизировано, дополнено на предмет новых условий поддержки и выпущено под версией 2.0.

Страницу Технической Поддержки и СОГЛАШЕНИЯ перенесено на OpenSCADA Wiki.[подробнее]

Категория:

Built in backuping of the OpenSCADA projects

The service script "openscada-proj" of the OpenSCADA projects appended for the projects' backuping.

The graphical part of the project manager in the module UI.QTStarter appended also for backuping status of the projects and context commands for their backup and restore.

Total complexity: 0.5 HD

Sponsored by, for whole complexity: Hadi Ramezani[подробнее]

Категория:

The industrial devices library of the DAQ-source templates is appended for a template of the protocol IEC-62056

IEC 62056 is a set of standards for electricity metering data exchange. The IEC 62056 standards are the international standard versions of the DLMS/COSEM specification.

In the way of the protocol implementation the module of the internal calculations JavaLikeCalc was expanded for the internal functions recursive execution!!!

State of the protocol implementing: CLIENT of the specification PART 46; reading of the directly specified OBISes.

Total complexity: 3.3 HD

Sponsored by, for whole complexity: SVItoVYR Ltd

Категория:

Expanding the configuration data storage in the config-file

The OpenSCADA configuration data storage in the configuration file by the functions TBDS::dataSeek(), TBDS::dataGet() and TBDS::dataSet(), expanded for work with the configuration XML-context, some common improved and fixed.

The configuration XML-context of the configuration functions applied for interstation copying of the main OpenSCADA configurators and in a new module BD.DBGate.[подробнее]

Категория:

The OpenSCADA release versions completed by implementing the service updates

Service updates is a part of the LTS version 0.9.U.S, where "S" is the service updating number. The service updates are built for any critical fixes, automatically or manually (for specific), and their allowed only for consumers subscribed to the official support — purchased an actual package of the technical support.

The first service update have done on the version 0.9.1.1, which built currently only for CentOS 8 and for a technical supported consumer. The consumer by this service update have got about 10 operative fixes.

The service updates are useful ones to keep your stable OpenSCADA-projects actual and fixed between the main updates cycle, when the fixings are performed operatively and also at your claims.

Категория:

ПЕРВОЕ обновление промышленного релиза OpenSCADA 0.9 LTS

Обновление 0.9.1 (8.04.2020) к промышленному релизу продолжительного времени поддержки (LTS) предназначено для обновления существующих установок промышленной версии с целью исправления известных проблем и некоторых улучшений с предоставлением оперативных сервисных обновлений пользователям, подписанным на техническую поддержку.

В целом, обновление исправляет около 250 ошибок и добавляет множество улучшений...[подробнее]

Категория:

The regulation elements library is finished in the forming-revision

The library is created to provide functions of different control algorithms and it can be used in programmable logic controllers (PLC) based on OpenSCADA for construction control schemes in the module DAQ.BlockCalc. The library is not static, but based on the module JavaLikeCalc, allowing to create calculations on the Java-like language. The functions' names and its parameters are available in languages: English, Ukrainian and Russian.

Forming of the library was finished by complete documenting and revising.[подробнее]

Категория:

The prescriptions library is finished in the forming-revision

The library is created to provide an environment of execution of scenarios of the technological operations — prescriptions, and frames of the user interface about them, including the frame of creation/edition the prescriptions and two frames of the execution control and reporting — "Prescription — run" and "Prescription — run, simple". The library is built on the basis primitives of the widgets and the internal programming language JavaLikeCalc, including templates and commands.

The element's names and their parameters are available in languages: English, Ukrainian and Russian. Their source code wrote in human-language independent mode with calls for the translations by the function tr() and the message's translation also allowed for English, Ukrainian and Russian.

Forming of the library was finished by complete documenting and revising.

Items of "the Prescriptions library" expanded for DB linking and the command and program tables automatic creation.[подробнее]

Категория: