The reports' and documents' library appended for the year report of the month values (docRepYear)

The document is provided for generating a year report of the month values in view of the trends diagram and the data table. The document is the dynamic type. The document commonly uses and represents the representative structure of the DAQ-template "Analog signal". As a data source of this document is the value archives of the DAQ-parameters mostly.

The document first introduced the manual entry of archival values of a large measurement time interval, which in this case is a month, as an undetermined interval. This feature is of great relevance for counters that for one reason or another cannot be connected to the system directly, with continuous measurement or periodic uploading of archive parts.

Manually entered data is stored whether traditionally in an archive of values, with only one value recorded per representative interval, that is, with unreliable values between them; or as a separate entry with a value in the message archive, also introduced for the first time by this document.

Категория:

The reports' and documents' library is finished in the forming-revision

The library is created to provide report and document elements-frames of the user interface and it contains graphic elements, often need when forming the user interface of the automation of technological and common processes. The library is mostly built on the basis the primitive "Document" and the internal programming language JavaLikeCalc, for the related functions also.

The element's names and their parameters are available in languages: English, Ukrainian and Russian. Their source code wrote in human-language independent mode with calls for the translations by the function tr() and the message's translation also allowed for English, Ukrainian and Russian.

Forming of the library was finished by complete documenting and revising.

The functions library of the reports was appended by a diagrams in SVG forming function.

The frames docRepInstVals, docRep2WorkSh, docRepDay and docRepMonth was significantly rewrote, improved and made secondly usable in the way of DAQ-parameters connecting.

[подробнее]

Категория:

The mnemonic elements library of the user interface is finished in the forming-revision

The library is created to provide mnemonic elements of the user interface. The library is built on the basis primitives of the widgets and the internal programming language JavaLikeCalc.

The library contains graphic elements, often need when forming the user interface of the automation of technological processes. Names and text options are available in three languages: English, Ukrainian and Russian.

Forming of the library was finished by complete documenting and revising.[подробнее]

Категория:

The main elements library of the user interface is finished in the forming

The library is created to provide main elements of the user interface. The library is built on the basis primitives of the widgets and the internal programming language JavaLikeCalc.

The library contains graphic elements, often need when forming the user interface of the automation of technological and common processes. Names and text options are available in three languages: English, Ukrainian and Russian.

Forming of the library was finished by documenting and revising the significant elements: "Contours group", "Group of overview frames", "Result graphics", "Regulator's control panel", "Element cadre", "Passport, extended".[подробнее]

Категория:

Debian Linux 10 + ARMHF

Appended for building for the hardware platform ARMHF.

At releasing the Debian Linux version 10 the OpenSCADA project was adapted to this version for:

- creating the proper building chroot-archives;

- building up the OpenSCADA packages and adaptation in general to build OpenSCADA in the environment of GCC 8 and Qt 5.11;

- expanding the Automation Linux repository and building the new Live disks;

- fixing OpenSCADA for executing the binaries built by GCC 8;

- expanding the automatic builder for building the packages and Live disks;

Категория:

The industrial devices library of the DAQ-source templates is finished in the forming and appended for a template of the protocol DNP3 implementation

The user protocol devices library created to provide access to industrial device's data through network, like to common industrial automation devices and wide resources counters, with protocols simple enough to implement into the User Protocol module, using the presented complex protocols (ModBus, OPC_UA, HTTP) or directly on the internal like to Java language.

Distributed Network Protocol 3 (DNP3) is a set of communications protocols used between components in process automation systems. Its main use is in utilities such as electric and water companies. Usage in other industries is not common. It was developed for communications between various types of data acquisition and control equipment. Competing standards include the older Modbus protocol and the newer IEC 61850 protocol and IEC 61870.

The template implements currently for the client, which uses the followed functions: Confirm (0x00), Read (0x01), Write (0x02), Enable (0x14) and Disable (0x15) Spontaneous Messages.

The protocol implementation is...[подробнее]

Категория:

The low level sensors and chips library of the DAQ-source templates is finished in the forming

Library of templates to provide access to device's data of the low-level buses.

The user protocol devices library created to provide access to device's data of low-level buses, with protocols simple enough to implement into the User Protocol module or directly on the internal like to Java language.

The template's names and their parameters are available in languages: English, Ukrainian and Russian. Their source code wrote in the human-language independent mode with calls for the translations by the function tr() and the message's translation also allowed for English, Ukrainian and Russian.

Forming of the library was finished by complete documenting and revising.[подробнее]

Категория:

The main library of the DAQ-source templates is finished in the forming and applied the new conception of forming the DAQ-violations

The library was created to provide main templates of the DAQ-sources processing and related services.

The template's names and their parameters are available in languages: English, Ukrainian and Russian. Their source code wrote in human language independent mode with calls for the translations by function tr() and the message's translation also allowed for English, Ukrainian and Russian.

Forming of the library was finished by forming the related document by appending the PID-templates: "PID signal (unified, violation statuses)" and "Impulse PID signal (unified, violation statuses)".

In the library completion, there was applied the new conception of forming DAQ-violations by the function DAQ.alarmSet()![подробнее]

Категория:

The main library of the DAQ-source templates appended for a template of the initiative connections processing for assigned output transports

The template of processing input initiative connections was created to provide the latest chain of implementation and support for conception of data acquisition in the passive mode and the initiative connection, that is — the control of associative connections, created by the input transport at each connection.

The function of creation associative output transports at connections is currently only supported by the module "Sockets" and for TCP-sockets.

Sponsored by: BLUE STAR GROUP Ltd

Категория:

The main library of the DAQ-source templates appended for a template of the notification by SMS, EMail(SMTP)

The complex template of the notification contains of parts of the dispatcher and the output user protocol of notification by EMail(SMTP) and SMS.

THE DISPATCHER can be performed for pointed messages of the message buffer of OpenSCADA and applied on the Logical level or the controller object of the module JavaLikeCalc.

THE OUTPUT USER PROTOCOL PART "SMS" provides operations with SMS by a GSM-modem connected as serial device. For now, there supported only sending SMS messages to a number of remote cell phone or GSM-modem. For sending there are supported: ECHO disable, PIN check and set, sending in PDU and the Text mode.

THE OUTPUT USER PROTOCOL PART "SMTP" provides operations with a SMTP-server for delivering EMails by their sending through TCP-Socket or SSL. For now, there are supported: TCP, SSL, AUTH, topic encoding for UTF-8.

Sponsored by: SVItoVYR LTD

Категория: