УкраїнськаEnglishmRussian
Вход/Новый

Новости проекта:

Суббота 12. Ноябрь 2022

Complete revision the document How to Create module

This manual is made to help in building the modules for OpenSCADA. The module creation may be required if you wish to add the support for new data source or other extension to OpenSCADA. Since OpenSCADA is an extremely modular system, all interfaces of interaction with the external environment are implemented by expanding it with modules of following types:

  • databases;
  • communication interfaces, transports;
  • protocols of the communication interfaces;
  • data sources and data acquisition;
  • archives-history (messages and values);
  • user interfaces (GUI, TUI, WebGUI, speech, signal ...);
  • additional modules, special.

Sponsored by, for complete revision on 1.8 HD: SINGE SOFTWARE[подробнее]

Категория: Показать только категорию:НовостьПоказать только категорию:Разработка

Воскресенье 11. Сентябрь 2022

The low level devices library of the DAQ-source templates appended by a template of the RDTech devices implementation

The RDTech (RuiDeng) UM24C, UM25C and UM34C are low-cost USB pass-through power measurement devices, and support a decent number of collection features, as well as full control via Bluetooth. This template implements most exposed commands and data collection available by the device's Bluetooth interface.

This template in first time uses the new output transports connection function SYS.Transport.outAt() and the Bluetooth interface for the data acquisition.

Total complexity: 0.3 HD

Thanks: for Ryan Finnie at the protocol initial processing in RDUMTOOL

Категория: Показать только категорию:НовостьПоказать только категорию:Разработка

Воскресенье 05. Июнь 2022

Common Conception of the Data Storage

The Data Storage in OpenSCADA initially built on different Data Bases and the Configuration File for the common, but interaction between these essences was not very clear also as managing the storage data between different storages.

So, in version 0.9.5 there was performed the storage unification what provides in whole for:

• direct storage and specifying the Generic Storage "*.*" as a combination of the Configuration File and the work Data Base;

• control for the data presence on different storages and providing for a function of managing-removing only data without the control object and from previous storages; priority of the DBs in their accessing;

• limiting of all configured-selected Data Bases only by the form "{Type}.{DB}" without a table here, that specified-bound to the object ID;

• all the data accessing functions moved under the conception.[подробнее]

Категория: Показать только категорию:НовостьПоказать только категорию:Разработка

Четверг 05. Май 2022

Changes in the OpenSCADA execution environment and the Automation Linux Distributive

There, during of months of the OpenSCADA 0.9.5 releasing, performed significant changes in the execution environment and the Automation Linux Distributive:

• appending a new Debian 11 release for OpenSCADA build and as a new base for the Automation Linux Distributive;

• updating the TDE stable release to 14.0.11 and 14.0.12, with fixing some its additional issues and packages;

• appending a new Ubuntu 22.04 release for OpenSCADA building;

• appending a new hardware platform ARM64 on the Debian 11 base (not tested);

• removing-disabling of building for the Maemo 5 (Nokia N900) platform since the cross-compiler crashes constantly at least in two places of the OpenSCADA source code.[подробнее]

Категория: Показать только категорию:НовостьПоказать только категорию:Разработка

Понедельник 02. Май 2022

Debian Linux 11 + ARM64

Appended of building for the hardware platform ARM64, that was also tested on RPi3 and Siemens IOT2050.

At releasing the Debian Linux version 11 in 19.08.21 the OpenSCADA project was adapted to this version in:

- creating the proper building chroot-archives;

- building up the OpenSCADA packages;

- expanding the Automation Linux repository and building the new Live Disks;

- expanding the automatic builder for building the packages and Live Disks.

Категория: Показать только категорию:НовостьПоказать только категорию:Разработка

Вторник 22. Февраль 2022

ПЯТОЕ обновление промышленного релиза OpenSCADA 0.9 LTS

Обновление 0.9.5 (22.02.2022) к промышленному релизу продолжительного времени поддержки (LTS) предназначено для обновления существующих установок промышленной версии с целью исправления известных проблем и некоторых улучшений с предоставлением оперативных сервисных обновлений пользователям, подписанным на техническую поддержку.

В целом, обновление исправляет около 50 ошибок и добавляет МНОЖЕСТВО улучшения с парой значительных-концептуальных ...[подробнее]

Категория: Показать только категорию:НовостьПоказать только категорию:Релиз

Воскресенье 05. Декабрь 2021

Necrolog of Tischenko Mykola Tarasovych

Mykola Tarasovych Tyshchenko took an implicit but significant part in the creation of this project as he was the director of "DIYA" LTD (1990 ... 2021), where the author of the project was currently working (1997...2020). Although direct official support of the project was never provided, nor was funding provided, but various automation equipment was purchased for the project, information resources of the project were hosted on the company's server (2004...2016), funded participation-reports at conferences and automation systems and scientific topics for practical implementation and testing were provided.[подробнее]

Категория: Показать только категорию:Новость

Среда 01. Декабрь 2021

Changing the registration conditions and rules on the OpenSCADA site

There was enabled the user registration approving by the site administrator and was changed Internet-channel of the OpenSCADA server, hence provided conditions to the registration public information.[подробнее]

Категория: Показать только категорию:Новость

Понедельник 12. Июль 2021

DAQ.Siemens — the Simple DAQ-Parameters type and data areas of ISO-TCP

The module DAQ.Siemens appended for the Simple type of the DAQ-Parameters support.

Also the module appended for the data area specifying as a negative DB with code of this area, and the Flags/Marks processing (0x83) added in a specific way, by the prefix "F".

Enabled for the parameters hierarchical including.

Fixed in sending the opening connection requests at the connection lost in the ISO-TCP own implementation.

Sponsored by, for the Simple type support and the data area specifying on 1.5 HD: INSERTEC LTDA[подробнее]

Категория: Показать только категорию:НовостьПоказать только категорию:Разработка

Понедельник 12. Июль 2021

A serie of significant improvements of the module {DAQ,Protocol}.OPC_UA

{DAQ,Protocol}.OPC_UA appended for the Publish service implementation, CHUNKS support on the DAQ-client part and the code coming refactoring in generic.

After the 0.9.4 LTS releasing that appended already for the Logical type DAQ-Parameters support and the Standard type DAQ-Parameters appended for the no requesting the metadata on the server mode and the attributes direct ID and name.

Sponsored by, for working with UAExpert 1.5, Client's Publish and Chunks implementing, significant refactoring, the Logical Level type support and the document complete revision on 10.4 HD: Fund[подробнее]

Категория: Показать только категорию:НовостьПоказать только категорию:Разработка

Отображение результатов 11 до 20 из 177
12365