Projects news:
The new module "Segnetics SMH2Gi" of the subsystem "DAQ" is created
The new module by order and hardware from "Laboratory of vacuum technologies" (e-beam.ru) and Vasily Grigoriev is created. Formal announce by the task and it documenting finish.
Segnetics "SMH 2Gi" — programming logical controller, aimed for automation of engineer systems of buildings and technological processes of industry.
OpenSCADA into PLC full revision
The article content full revised and it's translation synchronized. Also the page unlocked for actual works here tracing.
Visual Control Area (VCA) description full revision
VCA description full revised, actualized, updated, unitized and it translation synced, for the documents:
- Generic concept of the Visual Control Area(VCA)
- Module "VCAEngine" of the subsystem "User Interfaces"
- Module "Vision" of the subsystem "User Interfaces"
- Module "WebVision" of the subsystem "User Interfaces"
Notification mechanism of VCA expanding
The expanded notification mechanism of VCA provides:
- Free notification types definition up to 8 (0...7).
- A notification types description assigned to the VCA project by the main page user's attributes and on internal or external scripting languages.
- Adaptive notification to: a resource generation for it, direct notification both the VCA-server or the visualizer; checking for allowed methods for notify like different speech synthesis engines and the languages.
The conception of the data accessing by a user protocol
- Implemented into the Industrial devices library
- Implemented into the Low level sensors and chips library
Founded: January 2010
Members: Roman Savochenko
Description: Next level, based on the Logical Level, is a conception of accessing the data by a user protocol, implemented whether directly into the template code or as a different User Protocol object into the Protocol.UserProtocol module, where you currently may also use the DAQ-templates.
The module DAQ.Comedi 0.5.0
The new module DAQ.Comedi is created for allow support wide boards on buses ISA, PCI, PCMCIA and USB by "Comedi" (www.comedi.org) project's drivers collection.
New module accessible into work source tree of OpenSCADA.
The module work is tested on the following boards:
- Advantech PCL-725, PCL-726
- ADLink ACL-8113
Everyone who has boards from the collection "Comedi" project, are invited to test the module!
The module DAQ.ICP_DAS 1.0.0
The module DAQ.ICP_DAS rewrited and significant improved for expand support company "ICP DAS" devices' I-8xxx and I-87xxx series, added support main boards for ISA bus. Generally supported about 50 devices from "ICP DAS".
In future it is planed to expand support "ICP DAS" boards on buses PCI and PCI-Express.
New module accessible into work source tree of OpenSCADA.
Everyone, who has such devices company "ICP DAS", are invited to test the module!
Build the OpenSCADA project for mobile devices of the Nokia company (N800, N900, N950)
Name: NokiaLinux
Start: december 2010
Performers: Roman Savochenko, Maxim Lysenko
Description: The project is dedicated to building the OpenSCADA project for the mobile devices of the Nokia company (N800, N900, N950) on the Linux platforms Maemo and MeeGo.
Materials: ftp://ftp.oscada.org/OpenSCADA/Devices/Nokia[more]
Building OpenSCADA and firmware for ARM-controllers of ICP DAS company (LP-5141)
Name: LP-5xxx
Start: august 2011
Finish: september 2011
Version: 1.0.0
Performers: Roman Savochenko
Description: The project is dedicated to building the OpenSCADA and firmware for ARM controllers of the LP-5xxx and LP-8x{3|4}x series of the ICP DAS company.
Materials: ftp.oscada.org/OpenSCADA/PLC/LP5xx1[more]
The gallery engine is changed and all main galleries created or updated
For more informative OpenSCADA views and solves views builded for it giving is changed the gallery engine. All main OpenSCADA represents galleries is updated or finally created.[more]