OpenSCADA into PLC full revision

The article content full revised and it's translation synchronized. Also the page unlocked for actual works here tracing.

Category:

Visual Control Area (VCA) description full revision

VCA description full revised, actualized, updated, unitized and it translation synced, for the documents:

• Generic concept of the Visual Control Area(VCA)
• Module "VCAEngine" of the subsystem "User Interfaces"
• Module "Vision" of the subsystem "User Interfaces"
• Module "WebVision" of the subsystem "User Interfaces"

Category:

Notification mechanism of VCA expanding

The expanded notification mechanism of VCA provides:

• Free notification types definition up to 8 (0...7).
• A notification types description assigned to the VCA project by the main page user's attributes and on internal or external scripting languages.
• Adaptive notification to: a resource generation for it, direct notification both the VCA-server or the visualizer; checking for allowed methods for notify like different speech synthesis engines and the languages.

Category:

The conception of the data accessing by a user protocol

• Implemented into the Industrial devices library
• Implemented into the Low level sensors and chips library

Founded: January 2010

Members: Roman Savochenko

Description: Next level, based on the Logical Level, is a conception of accessing the data by a user protocol, implemented whether directly into the template code or as a different User Protocol object into the Protocol.UserProtocol module, where you currently may also use the DAQ-templates.

Category:

The module DAQ.Comedi 0.5.0

The new module DAQ.Comedi is created for allow support wide boards on buses ISA, PCI, PCMCIA and USB by "Comedi" (www.comedi.org) project's drivers collection.

New module accessible into work source tree of OpenSCADA.

The module work is tested on the following boards:

• Advantech PCL-725, PCL-726
• ADLink ACL-8113

Everyone who has boards from the collection "Comedi" project, are invited to test the module!

Category:

The module DAQ.ICP_DAS 1.0.0

The module DAQ.ICP_DAS rewrited and significant improved for expand support company "ICP DAS" devices' I-8xxx and I-87xxx series, added support main boards for ISA bus. Generally supported about 50 devices from "ICP DAS".

In future it is planed to expand support "ICP DAS" boards on buses PCI and PCI-Express.

New module accessible into work source tree of OpenSCADA.

Everyone, who has such devices company "ICP DAS", are invited to test the module!

Category:

Build the OpenSCADA project for mobile devices of the Nokia company (N800, N900, N950)

Name: NokiaLinux

Start: december 2010

Performers: Roman Savochenko, Maxim Lysenko

Description: The project is dedicated to building the OpenSCADA project for the mobile devices of the Nokia company (N800, N900, N950) on the Linux platforms Maemo and MeeGo.

Materials: ftp://ftp.oscada.org/OpenSCADA/Devices/Nokia[more]

Category:

Building OpenSCADA and firmware for ARM-controllers of ICP DAS company (LP-5141)

Name: LP-5xxx

Start: august 2011

Finish: september 2011

Version: 1.0.0

Performers: Roman Savochenko

Description: The project is dedicated to building the OpenSCADA and firmware for ARM controllers of the LP-5xxx and LP-8x{3|4}x series of the ICP DAS company.

Materials: ftp.oscada.org/OpenSCADA/PLC/LP5xx1[more]

Category:

The gallery engine is changed and all main galleries created or updated

For more informative OpenSCADA views and solves views builded for it giving is changed the gallery engine. All main OpenSCADA represents galleries is updated or finally created.[more]

Category:

New modules of the transport "Serial" and the protocol "ModBus" are created

Created module "Serial" of subsystem "Transport" for uniform access to serial interfaces and created module "ModBus" of subsystem "Protocol" for Server/Slave ModBus protocol mode support.[more]

Category: