* Package: dev-util/openscada-0.9.0 * Repository: local * USE: abi_x86_64 amd64 bfn blockcalc daqgate dbarch dbase doc elibc_glibc flibcomplex1 flibmath flibsys fsarch http icp_das javalikecalc kernel_linux logiclev modbus qtcfg qtstarter selfsystem serial sockets soundcard sqlite ssl system systemtest userland_GNU userprotocol vcaengine vision webcfg webcfgd webuser webvision * FEATURES: preserve-libs sandbox usersandbox /var/calculate/portage/dev-util/openscada/openscada-0.9.0.ebuild: line 52: x86: command not found * Module ICP_DAS can used for x86 architecture only! Disabled. * Was set USE="dcon" for using ICP-DAS module! >>> Unpacking source... >>> Unpacking openscada-0.9.0.tar.xz to /var/calculate/tmp/portage/dev-util/openscada-0.9.0/work >>> Unpacking openscada-res-0.9.0.tar.xz to /var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0 >>> Source unpacked in /var/calculate/tmp/portage/dev-util/openscada-0.9.0/work >>> Preparing source in /var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0 ... * Running eautoreconf in '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0' ... * Running libtoolize --install --copy --force --automake ... [ ok ] * Running aclocal ... [ ok ] * Running autoconf --force ... [ ok ] * Running autoheader ... [ ok ] * Running automake --add-missing --copy --force-missing ... [ ok ] * Running elibtoolize in: openscada-0.9.0/ * Applying portage/1.2.0 patch ... * Applying sed/1.5.6 patch ... * Applying as-needed/2.4.3 patch ... >>> Source prepared. >>> Configuring source in /var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0 ... * econf: updating openscada-0.9.0/config.guess with /usr/share/gnuconfig/config.guess * econf: updating openscada-0.9.0/config.sub with /usr/share/gnuconfig/config.sub ./configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-dependency-tracking --disable-silent-rules --docdir=/usr/share/doc/openscada-0.9.0 --htmldir=/usr/share/doc/openscada-0.9.0/html --libdir=/usr/lib64 --enable-BFN --enable-BlockCalc --enable-DAQGate --enable-DBArch --enable-DBF --disable-DCON --disable-FireBird --enable-FLibComplex1 --enable-FLibMath --enable-FLibSYS --enable-FSArch --enable-HTTP --enable-ICP_DAS --enable-JavaLikeCalc --disable-LDAP --enable-LogicLev --enable-ModBus --disable-MySQL --disable-OPC_UA --disable-PostgreSQL --enable-QTCfg --enable-QTStarter --enable-SelfSystem --enable-Serial --disable-Siemens --disable-SNMP --enable-Sockets --enable-SoundCard --enable-SQLite --enable-SSL --enable-System --enable-SystemTests --enable-UserProtocol --enable-VCAEngine --enable-Vision --enable-WebCfg --enable-WebCfgD --enable-WebVision --enable-WebUser checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking target system type... x86_64-pc-linux-gnu checking for a BSD-compatible install... /usr/lib/portage/python3.6/ebuild-helpers/xattr/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for x86_64-pc-linux-gnu-gcc... x86_64-pc-linux-gnu-gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether x86_64-pc-linux-gnu-gcc accepts -g... yes checking for x86_64-pc-linux-gnu-gcc option to accept ISO C89... none needed checking whether x86_64-pc-linux-gnu-gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of x86_64-pc-linux-gnu-gcc... none checking for x86_64-pc-linux-gnu-g++... x86_64-pc-linux-gnu-g++ checking whether we are using the GNU C++ compiler... yes checking whether x86_64-pc-linux-gnu-g++ accepts -g... yes checking dependency style of x86_64-pc-linux-gnu-g++... none checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by x86_64-pc-linux-gnu-gcc... /usr/x86_64-pc-linux-gnu/bin/ld checking if the linker (/usr/x86_64-pc-linux-gnu/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/x86_64-pc-linux-gnu-nm -B checking the name lister (/usr/bin/x86_64-pc-linux-gnu-nm -B) interface... BSD nm checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/x86_64-pc-linux-gnu/bin/ld option to reload object files... -r checking for x86_64-pc-linux-gnu-objdump... x86_64-pc-linux-gnu-objdump checking how to recognize dependent libraries... pass_all checking for x86_64-pc-linux-gnu-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for x86_64-pc-linux-gnu-ar... x86_64-pc-linux-gnu-ar checking for archiver @FILE support... @ checking for x86_64-pc-linux-gnu-strip... x86_64-pc-linux-gnu-strip checking for x86_64-pc-linux-gnu-ranlib... x86_64-pc-linux-gnu-ranlib checking command to parse /usr/bin/x86_64-pc-linux-gnu-nm -B output from x86_64-pc-linux-gnu-gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for x86_64-pc-linux-gnu-mt... no checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... x86_64-pc-linux-gnu-gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if x86_64-pc-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no checking for x86_64-pc-linux-gnu-gcc option to produce PIC... -fPIC -DPIC checking if x86_64-pc-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes checking if x86_64-pc-linux-gnu-gcc static flag -static works... yes checking if x86_64-pc-linux-gnu-gcc supports -c -o file.o... yes checking if x86_64-pc-linux-gnu-gcc supports -c -o file.o... (cached) yes checking whether the x86_64-pc-linux-gnu-gcc linker (/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for shl_load... no checking for shl_load in -ldld... no checking for dlopen... no checking for dlopen in -ldl... yes checking whether a program can dlopen itself... yes checking whether a statically linked program can dlopen itself... no checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking how to run the C++ preprocessor... x86_64-pc-linux-gnu-g++ -E checking for ld used by x86_64-pc-linux-gnu-g++... /usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64 checking if the linker (/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64) is GNU ld... yes checking whether the x86_64-pc-linux-gnu-g++ linker (/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries... yes checking for x86_64-pc-linux-gnu-g++ option to produce PIC... -fPIC -DPIC checking if x86_64-pc-linux-gnu-g++ PIC flag -fPIC -DPIC works... yes checking if x86_64-pc-linux-gnu-g++ static flag -static works... yes checking if x86_64-pc-linux-gnu-g++ supports -c -o file.o... yes checking if x86_64-pc-linux-gnu-g++ supports -c -o file.o... (cached) yes checking whether the x86_64-pc-linux-gnu-g++ linker (/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for x86_64-pc-linux-gnu-pkg-config... /usr/bin/x86_64-pc-linux-gnu-pkg-config checking pkg-config is at least version 0.9.0... yes checking whether build environment is sane... yes checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for ANSI C header files... (cached) yes checking for sys/wait.h that is POSIX.1 compatible... yes checking time.h usability... yes checking time.h presence... yes checking for time.h... yes checking signal.h usability... yes checking signal.h presence... yes checking for signal.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking math.h usability... yes checking math.h presence... yes checking for math.h... yes checking errno.h usability... yes checking errno.h presence... yes checking for errno.h... yes checking for unistd.h... (cached) yes checking dirent.h usability... yes checking dirent.h presence... yes checking for dirent.h... yes checking stdio.h usability... yes checking stdio.h presence... yes checking for stdio.h... yes checking stdarg.h usability... yes checking stdarg.h presence... yes checking for stdarg.h... yes checking for stdlib.h... (cached) yes checking for dlfcn.h... (cached) yes checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking pthread.h usability... yes checking pthread.h presence... yes checking for pthread.h... yes checking for sys/types.h... (cached) yes checking for sys/stat.h... (cached) yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking sys/utsname.h usability... yes checking sys/utsname.h presence... yes checking for sys/utsname.h... yes checking string usability... yes checking string presence... yes checking for string... yes checking vector usability... yes checking vector presence... yes checking for vector... yes checking map usability... yes checking map presence... yes checking for map... yes checking exception usability... yes checking exception presence... yes checking for exception... yes checking typeinfo usability... yes checking typeinfo presence... yes checking for typeinfo... yes checking deque usability... yes checking deque presence... yes checking for deque... yes checking langinfo.h usability... yes checking langinfo.h presence... yes checking for langinfo.h... yes checking syscall.h usability... yes checking syscall.h presence... yes checking for syscall.h... yes checking iconv.h usability... yes checking iconv.h presence... yes checking for iconv.h... yes checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking for library containing libiconv_open... no checking for xgettext... xgettext checking for msgmerge... msgmerge checking for msgfmt... msgfmt checking for library containing libintl_bindtextdomain... no checking for stdbool.h that conforms to C99... no checking for _Bool... no checking for an ANSI C-conforming const... yes checking for inline... inline checking for off_t... yes checking for pid_t... yes checking for size_t... yes checking whether time.h and sys/time.h may both be included... yes checking whether struct tm is in sys/time.h or time.h... time.h checking whether closedir returns void... no checking for sys/time.h... (cached) yes checking for unistd.h... (cached) yes checking for alarm... yes checking for working mktime... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking types of arguments for select... int,fd_set *,struct timeval * checking return type of signal handlers... void checking whether lstat correctly handles trailing slash... yes checking whether stat accepts an empty string... no checking for library containing strerror... none required ========== Check for libraries of the core ============= checking whether x86_64-pc-linux-gnu-gcc is Clang... no checking whether pthreads work with -pthread... yes checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE checking whether more special flags are required for pthreads... no checking for PTHREAD_PRIO_INHERIT... yes checking for stdlib.h... (cached) yes checking for GNU libc compatible malloc... yes checking for stdlib.h... (cached) yes checking for GNU libc compatible realloc... yes checking for library containing sin... none required checking for library containing dlopen... -ldl checking for library containing clock_nanosleep... none required checking crypt.h usability... yes checking crypt.h presence... yes checking for crypt.h... yes checking for library containing crypt... -lcrypt checking for library containing deflate... -lz checking pcre.h usability... yes checking pcre.h presence... yes checking for pcre.h... yes checking for library containing pcre_compile... -lpcre ========== Check for building modules ============= Build module: DB.SQLite checking for sqlite3 > 3... yes checking for sqlite3_open in -lsqlite3... yes Build module: DB.DBF Build module: DAQ.JavaLikeCalc checking for bison... bison -y checking for bison... true Build module: DAQ.LogicLev Build module: DAQ.BlockCalc Build module: DAQ.DAQGate Build module: DAQ.System checking sensors/sensors.h usability... yes checking sensors/sensors.h presence... yes checking for sensors/sensors.h... yes checking for sensors_init in -lsensors... yes configure: LibSensors: Pass global library using Build module: DAQ.ModBus Build module: DAQ.SoundCard checking portaudio.h usability... yes checking portaudio.h presence... yes checking for portaudio.h... yes checking for Pa_Initialize in -lportaudio... yes Build module: DAQ.BFN Build module: DAQ.AMRDevs Build module: Archive.FSArch Build module: Archive.DBArch Build module: Transport.Sockets checking linux/can.h usability... yes checking linux/can.h presence... yes checking for linux/can.h... yes checking sys/un.h usability... yes checking sys/un.h presence... yes checking for sys/un.h... yes checking for sys/socket.h... (cached) yes checking for sys/select.h... (cached) yes checking arpa/inet.h usability... yes checking arpa/inet.h presence... yes checking for arpa/inet.h... yes checking netinet/in.h usability... yes checking netinet/in.h presence... yes checking for netinet/in.h... yes checking netdb.h usability... yes checking netdb.h presence... yes checking for netdb.h... yes Build module: Transport.Serial checking linux/serial.h usability... yes checking linux/serial.h presence... yes checking for linux/serial.h... yes checking linux/i2c-dev.h usability... yes checking linux/i2c-dev.h presence... yes checking for linux/i2c-dev.h... yes checking linux/spi/spidev.h usability... yes checking linux/spi/spidev.h presence... yes checking for linux/spi/spidev.h... yes Build module: Transport.SSL checking openssl/ssl.h usability... yes checking openssl/ssl.h presence... yes checking for openssl/ssl.h... yes checking openssl/err.h usability... yes checking openssl/err.h presence... yes checking for openssl/err.h... yes checking openssl/bio.h usability... yes checking openssl/bio.h presence... yes checking for openssl/bio.h... yes checking openssl/md5.h usability... yes checking openssl/md5.h presence... yes checking for openssl/md5.h... yes checking for MD5_Init in -lcrypto... yes checking for SSL_free in -lssl... yes Build module: Protocol.SelfSystem Build module: Protocol.UserProtocol Build module: Protocol.HTTP Build module: UI.VCAEngine Build module: UI.QTStarter checking for QtGui > 4.3.0... no configure: Qt4 isn't found. checking for Qt5Widgets > 5.1.0... yes checking for Qt5PrintSupport > 5.1.0... yes checking for Qt5Sensors > 1.2.0... yes Build module: UI.QTCfg Build module: UI.Vision checking fftw3.h usability... yes checking fftw3.h presence... yes checking for fftw3.h... yes checking for fftw_execute in -lfftw3... yes configure: LibFFTW3: Pass global library using checking for Qt5WebKitWidgets > 5.1.0... yes checking for phonon4qt5 > 4.3.0... yes checking phonon/VideoPlayer usability... yes checking phonon/VideoPlayer presence... no configure: WARNING: phonon/VideoPlayer: accepted by the compiler, rejected by the preprocessor! configure: WARNING: phonon/VideoPlayer: proceeding with the compiler's result checking for phonon/VideoPlayer... yes Build module: UI.WebCfg Build module: UI.WebCfgD Build module: UI.WebVision checking for gdlib > 2... yes checking gd.h usability... yes checking gd.h presence... yes checking for gd.h... yes checking for library containing gdImageCreate... -lgd Build module: UI.WebUser Build module: Special.FLibSYS Build module: Special.SystemTests Build module: Special.FLibMath Build module: Special.FLibComplex1 =========================================== checking that generated files are newer than configure... done checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating openscada.pc config.status: creating src/Makefile config.status: creating src_call/Makefile config.status: creating data/openscada.desktop config.status: creating data/openscada_start config.status: creating data/openscada-proj config.status: creating data/ModelsDB/AGLKS/openscada_AGLKS.desktop config.status: creating data/ModelsDB/Boiler/openscada_Boiler.desktop config.status: creating src/moduls/bd/SQLite/Makefile config.status: creating src/moduls/bd/DBF/Makefile config.status: creating src/moduls/daq/JavaLikeCalc/Makefile config.status: creating src/moduls/daq/LogicLev/Makefile config.status: creating src/moduls/daq/BlockCalc/Makefile config.status: creating src/moduls/daq/DAQGate/Makefile config.status: creating src/moduls/daq/System/Makefile config.status: creating src/moduls/daq/ModBus/Makefile config.status: creating src/moduls/daq/SoundCard/Makefile config.status: creating src/moduls/daq/BFN/Makefile config.status: creating src/moduls/daq/AMRDevs/Makefile config.status: creating src/moduls/arhiv/FSArch/Makefile config.status: creating src/moduls/arhiv/DBArch/Makefile config.status: creating src/moduls/transport/Sockets/Makefile config.status: creating src/moduls/transport/Serial/Makefile config.status: creating src/moduls/transport/SSL/Makefile config.status: creating src/moduls/protocol/SelfSystem/Makefile config.status: creating src/moduls/protocol/UserProtocol/Makefile config.status: creating src/moduls/protocol/HTTP/Makefile config.status: creating src/moduls/ui/VCAEngine/Makefile config.status: creating src/moduls/ui/QTStarter/Makefile config.status: creating src/moduls/ui/QTCfg/Makefile config.status: creating src/moduls/ui/Vision/Makefile config.status: creating src/moduls/ui/WebCfg/Makefile config.status: creating src/moduls/ui/WebCfgD/Makefile config.status: creating src/moduls/ui/WebVision/Makefile config.status: creating src/moduls/ui/WebUser/Makefile config.status: creating src/moduls/special/FLibSYS/Makefile config.status: creating src/moduls/special/SystemTests/Makefile config.status: creating src/moduls/special/FLibMath/Makefile config.status: creating src/moduls/special/FLibComplex1/Makefile config.status: creating src/config.h config.status: executing depfiles commands config.status: executing libtool commands ============ Final configuration results ============== * Status: - To enable (yes), to include/builtin (incl), for a distributive (dist), to disable (no) all modules = individual - Cross compilation = no - The core library compilation only in static = no * Generic features: - Strings charset encode support (by iconv) = yes - Interfaces internationalisation (I18N) support (by LibIntl) = yes - LibGD forcing for the core and the modules = no - Compilation modules of the sunsystems: "DB": SQLite DBF "DAQ": JavaLikeCalc LogicLev BlockCalc DAQGate System ModBus SoundCard BFN AMRDevs "Archive": FSArch DBArch "Transport": Sockets Serial SSL "Transport's protocol": SelfSystem UserProtocol HTTP "UI": VCAEngine QTStarter QTCfg Vision WebCfg WebCfgD WebVision WebUser "Special": FLibSYS SystemTests FLibMath FLibComplex1 - Including/builtin modules to the OpenSCADA core: * Features of some specific modules: - FFTW3 to obtain spectrum of signal: -lfftw3 - Library of the Linux sensors: -lsensors - Web-browser's engine WebKit: -lQt5WebKitWidgets - Media player's engine: -lphonon4qt5 -lQt5Gui -lQt5DBus -lQt5Core >>> Source configured. >>> Compiling source in /var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0 ... make -j5 Making all in src make[1]: Entering directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src' make all-recursive make[2]: Entering directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src' Making all in . make[3]: Entering directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src' /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c -o liboscada_la-tsys.lo `test -f 'tsys.cpp' || echo './'`tsys.cpp /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c -o liboscada_la-resalloc.lo `test -f 'resalloc.cpp' || echo './'`resalloc.cpp /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c -o liboscada_la-tarchives.lo `test -f 'tarchives.cpp' || echo './'`tarchives.cpp /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c -o liboscada_la-tarchval.lo `test -f 'tarchval.cpp' || echo './'`tarchval.cpp /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c -o liboscada_la-tbds.lo `test -f 'tbds.cpp' || echo './'`tbds.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c resalloc.cpp -fPIC -DPIC -o .libs/liboscada_la-resalloc.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tarchval.cpp -fPIC -DPIC -o .libs/liboscada_la-tarchval.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tarchives.cpp -fPIC -DPIC -o .libs/liboscada_la-tarchives.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tsys.cpp -fPIC -DPIC -o .libs/liboscada_la-tsys.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tbds.cpp -fPIC -DPIC -o .libs/liboscada_la-tbds.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c resalloc.cpp -o liboscada_la-resalloc.o >/dev/null 2>&1 tsys.cpp: In static member function ‘static void OSCADA::TSYS::ctrListFS(OSCADA::XMLNode*, const string&, const string&)’: tsys.cpp:2747:37: warning: ‘int readdir_r(DIR*, dirent*, dirent**)’ is deprecated [-Wdeprecated-declarations] while(readdir_r(IdDir,sDir,&sDirRez) == 0 && sDirRez) { ^ In file included from tsys.cpp:29:0: /usr/include/dirent.h:183:12: note: declared here extern int readdir_r (DIR *__restrict __dirp, ^~~~~~~~~ tsys.cpp: In member function ‘bool OSCADA::TSYS::prjSwitch(const string&, bool)’: tsys.cpp:1845:8: warning: ignoring return value of ‘int system(const char*)’, declared with attribute warn_unused_result [-Wunused-result] system((string("dPrj=") + oscd_datadir_full + ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  " dPrjUser=" + prjUserDir() + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  " dSysCfg=" + sysconfdir_full + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  " dData=" + datadir_full + ~~~~~~~~~~~~~~~~~~~~~~~~~~  " " bindir_full "/openscada-proj" + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  " " + (toCreate?"create":"proc") + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  " " + prj).c_str()); ~~~~~~~~~~~~~~~~~~~ tsys.cpp: In member function ‘bool OSCADA::TSYS::prjLock(const char*)’: tsys.cpp:1919:7: warning: ignoring return value of ‘ssize_t write(int, const void*, size_t)’, declared with attribute warn_unused_result [-Wunused-result] write(hd, lockInfo.data(), lockInfo.size()); ~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c -o liboscada_la-tvariant.lo `test -f 'tvariant.cpp' || echo './'`tvariant.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tvariant.cpp -fPIC -DPIC -o .libs/liboscada_la-tvariant.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tbds.cpp -o liboscada_la-tbds.o >/dev/null 2>&1 libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tvariant.cpp -o liboscada_la-tvariant.o >/dev/null 2>&1 /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c -o liboscada_la-tconfig.lo `test -f 'tconfig.cpp' || echo './'`tconfig.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tconfig.cpp -fPIC -DPIC -o .libs/liboscada_la-tconfig.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tarchives.cpp -o liboscada_la-tarchives.o >/dev/null 2>&1 libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tconfig.cpp -o liboscada_la-tconfig.o >/dev/null 2>&1 /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c -o liboscada_la-tcontroller.lo `test -f 'tcontroller.cpp' || echo './'`tcontroller.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tsys.cpp -o liboscada_la-tsys.o >/dev/null 2>&1 libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tcontroller.cpp -fPIC -DPIC -o .libs/liboscada_la-tcontroller.o /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c -o liboscada_la-tsecurity.lo `test -f 'tsecurity.cpp' || echo './'`tsecurity.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tsecurity.cpp -fPIC -DPIC -o .libs/liboscada_la-tsecurity.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tsecurity.cpp -o liboscada_la-tsecurity.o >/dev/null 2>&1 libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tcontroller.cpp -o liboscada_la-tcontroller.o >/dev/null 2>&1 libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tarchval.cpp -o liboscada_la-tarchval.o >/dev/null 2>&1 /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c -o liboscada_la-tmess.lo `test -f 'tmess.cpp' || echo './'`tmess.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tmess.cpp -fPIC -DPIC -o .libs/liboscada_la-tmess.o /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c -o liboscada_la-tsubsys.lo `test -f 'tsubsys.cpp' || echo './'`tsubsys.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tsubsys.cpp -fPIC -DPIC -o .libs/liboscada_la-tsubsys.o /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c -o liboscada_la-tprotocols.lo `test -f 'tprotocols.cpp' || echo './'`tprotocols.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tprotocols.cpp -fPIC -DPIC -o .libs/liboscada_la-tprotocols.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tsubsys.cpp -o liboscada_la-tsubsys.o >/dev/null 2>&1 libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tprotocols.cpp -o liboscada_la-tprotocols.o >/dev/null 2>&1 /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c -o liboscada_la-ttransports.lo `test -f 'ttransports.cpp' || echo './'`ttransports.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c ttransports.cpp -fPIC -DPIC -o .libs/liboscada_la-ttransports.o /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c -o liboscada_la-tspecials.lo `test -f 'tspecials.cpp' || echo './'`tspecials.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tmess.cpp -o liboscada_la-tmess.o >/dev/null 2>&1 libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tspecials.cpp -fPIC -DPIC -o .libs/liboscada_la-tspecials.o /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c -o liboscada_la-ttypedaq.lo `test -f 'ttypedaq.cpp' || echo './'`ttypedaq.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c ttypedaq.cpp -fPIC -DPIC -o .libs/liboscada_la-ttypedaq.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tspecials.cpp -o liboscada_la-tspecials.o >/dev/null 2>&1 /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c -o liboscada_la-tprmtmpl.lo `test -f 'tprmtmpl.cpp' || echo './'`tprmtmpl.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tprmtmpl.cpp -fPIC -DPIC -o .libs/liboscada_la-tprmtmpl.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c ttypedaq.cpp -o liboscada_la-ttypedaq.o >/dev/null 2>&1 /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c -o liboscada_la-tvalue.lo `test -f 'tvalue.cpp' || echo './'`tvalue.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tvalue.cpp -fPIC -DPIC -o .libs/liboscada_la-tvalue.o /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c -o liboscada_la-terror.lo `test -f 'terror.cpp' || echo './'`terror.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c terror.cpp -fPIC -DPIC -o .libs/liboscada_la-terror.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c terror.cpp -o liboscada_la-terror.o >/dev/null 2>&1 /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c -o liboscada_la-tuis.lo `test -f 'tuis.cpp' || echo './'`tuis.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tuis.cpp -fPIC -DPIC -o .libs/liboscada_la-tuis.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tuis.cpp -o liboscada_la-tuis.o >/dev/null 2>&1 libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tprmtmpl.cpp -o liboscada_la-tprmtmpl.o >/dev/null 2>&1 libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c ttransports.cpp -o liboscada_la-ttransports.o >/dev/null 2>&1 libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tvalue.cpp -o liboscada_la-tvalue.o >/dev/null 2>&1 /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c -o liboscada_la-tmodschedul.lo `test -f 'tmodschedul.cpp' || echo './'`tmodschedul.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tmodschedul.cpp -fPIC -DPIC -o .libs/liboscada_la-tmodschedul.o /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c -o liboscada_la-telem.lo `test -f 'telem.cpp' || echo './'`telem.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c telem.cpp -fPIC -DPIC -o .libs/liboscada_la-telem.o tmodschedul.cpp: In member function ‘void OSCADA::TModSchedul::dirScan(const string&, std::vector >&)’: tmodschedul.cpp:148:43: warning: ‘int readdir_r(DIR*, dirent*, dirent**)’ is deprecated [-Wdeprecated-declarations] while(readdir_r(dirId,scanDirent,&scanRez) == 0 && scanRez) { ^ In file included from tmodschedul.cpp:25:0: /usr/include/dirent.h:183:12: note: declared here extern int readdir_r (DIR *__restrict __dirp, ^~~~~~~~~ /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c -o liboscada_la-tparamcontr.lo `test -f 'tparamcontr.cpp' || echo './'`tparamcontr.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tparamcontr.cpp -fPIC -DPIC -o .libs/liboscada_la-tparamcontr.o /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c -o liboscada_la-tmodule.lo `test -f 'tmodule.cpp' || echo './'`tmodule.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tmodule.cpp -fPIC -DPIC -o .libs/liboscada_la-tmodule.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c telem.cpp -o liboscada_la-telem.o >/dev/null 2>&1 libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tmodschedul.cpp -o liboscada_la-tmodschedul.o >/dev/null 2>&1 libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tmodule.cpp -o liboscada_la-tmodule.o >/dev/null 2>&1 /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c -o liboscada_la-xml.lo `test -f 'xml.cpp' || echo './'`xml.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c xml.cpp -fPIC -DPIC -o .libs/liboscada_la-xml.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tparamcontr.cpp -o liboscada_la-tparamcontr.o >/dev/null 2>&1 /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c -o liboscada_la-tcntrnode.lo `test -f 'tcntrnode.cpp' || echo './'`tcntrnode.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tcntrnode.cpp -fPIC -DPIC -o .libs/liboscada_la-tcntrnode.o /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c -o liboscada_la-tdaqs.lo `test -f 'tdaqs.cpp' || echo './'`tdaqs.cpp /bin/sh ../libtool --tag=CXX --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c -o liboscada_la-tfunction.lo `test -f 'tfunction.cpp' || echo './'`tfunction.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tdaqs.cpp -fPIC -DPIC -o .libs/liboscada_la-tdaqs.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tfunction.cpp -fPIC -DPIC -o .libs/liboscada_la-tfunction.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c xml.cpp -o liboscada_la-xml.o >/dev/null 2>&1 libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tfunction.cpp -o liboscada_la-tfunction.o >/dev/null 2>&1 libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tdaqs.cpp -o liboscada_la-tdaqs.o >/dev/null 2>&1 libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -pthread -O2 -march=native -pipe -c tcntrnode.cpp -o liboscada_la-tcntrnode.o >/dev/null 2>&1 /bin/sh ../libtool --tag=CXX --mode=link x86_64-pc-linux-gnu-g++ -pthread -O2 -march=native -pipe -version-info 3:6:0 -Wl,--as-needed -o liboscada.la -rpath /usr/lib64 liboscada_la-tsys.lo liboscada_la-resalloc.lo liboscada_la-tarchives.lo liboscada_la-tarchval.lo liboscada_la-tbds.lo liboscada_la-tvariant.lo liboscada_la-tconfig.lo liboscada_la-tcontroller.lo liboscada_la-tsecurity.lo liboscada_la-tmess.lo liboscada_la-tsubsys.lo liboscada_la-tprotocols.lo liboscada_la-ttransports.lo liboscada_la-tspecials.lo liboscada_la-ttypedaq.lo liboscada_la-tprmtmpl.lo liboscada_la-tvalue.lo liboscada_la-terror.lo liboscada_la-tuis.lo liboscada_la-tmodschedul.lo liboscada_la-telem.lo liboscada_la-tparamcontr.lo liboscada_la-tmodule.lo liboscada_la-xml.lo liboscada_la-tcntrnode.lo liboscada_la-tdaqs.lo liboscada_la-tfunction.lo -lpcre -lz -lcrypt -ldl libtool: link: x86_64-pc-linux-gnu-g++ -fPIC -DPIC -shared -nostdlib /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtbeginS.o .libs/liboscada_la-tsys.o .libs/liboscada_la-resalloc.o .libs/liboscada_la-tarchives.o .libs/liboscada_la-tarchval.o .libs/liboscada_la-tbds.o .libs/liboscada_la-tvariant.o .libs/liboscada_la-tconfig.o .libs/liboscada_la-tcontroller.o .libs/liboscada_la-tsecurity.o .libs/liboscada_la-tmess.o .libs/liboscada_la-tsubsys.o .libs/liboscada_la-tprotocols.o .libs/liboscada_la-ttransports.o .libs/liboscada_la-tspecials.o .libs/liboscada_la-ttypedaq.o .libs/liboscada_la-tprmtmpl.o .libs/liboscada_la-tvalue.o .libs/liboscada_la-terror.o .libs/liboscada_la-tuis.o .libs/liboscada_la-tmodschedul.o .libs/liboscada_la-telem.o .libs/liboscada_la-tparamcontr.o .libs/liboscada_la-tmodule.o .libs/liboscada_la-xml.o .libs/liboscada_la-tcntrnode.o .libs/liboscada_la-tdaqs.o .libs/liboscada_la-tfunction.o -Wl,--as-needed -lpcre -lz -lcrypt -ldl -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64 -L/lib/../lib64 -L/usr/lib/../lib64 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../x86_64-pc-linux-gnu/lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crtn.o -pthread -O2 -march=native -pthread -Wl,-soname -Wl,liboscada.so.3 -o .libs/liboscada.so.3.0.6 libtool: link: (cd ".libs" && rm -f "liboscada.so.3" && ln -s "liboscada.so.3.0.6" "liboscada.so.3") libtool: link: (cd ".libs" && rm -f "liboscada.so" && ln -s "liboscada.so.3.0.6" "liboscada.so") libtool: link: x86_64-pc-linux-gnu-ar cru .libs/liboscada.a liboscada_la-tsys.o liboscada_la-resalloc.o liboscada_la-tarchives.o liboscada_la-tarchval.o liboscada_la-tbds.o liboscada_la-tvariant.o liboscada_la-tconfig.o liboscada_la-tcontroller.o liboscada_la-tsecurity.o liboscada_la-tmess.o liboscada_la-tsubsys.o liboscada_la-tprotocols.o liboscada_la-ttransports.o liboscada_la-tspecials.o liboscada_la-ttypedaq.o liboscada_la-tprmtmpl.o liboscada_la-tvalue.o liboscada_la-terror.o liboscada_la-tuis.o liboscada_la-tmodschedul.o liboscada_la-telem.o liboscada_la-tparamcontr.o liboscada_la-tmodule.o liboscada_la-xml.o liboscada_la-tcntrnode.o liboscada_la-tdaqs.o liboscada_la-tfunction.o libtool: link: x86_64-pc-linux-gnu-ranlib .libs/liboscada.a libtool: link: ( cd ".libs" && rm -f "liboscada.la" && ln -s "../liboscada.la" "liboscada.la" ) make[3]: Leaving directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src' Making all in moduls/bd/SQLite make[3]: Entering directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/bd/SQLite' /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o bd_SQLite_la-bd_sqlite.lo `test -f 'bd_sqlite.cpp' || echo './'`bd_sqlite.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c bd_sqlite.cpp -fPIC -DPIC -o .libs/bd_SQLite_la-bd_sqlite.o /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=link x86_64-pc-linux-gnu-g++ -O2 -march=native -pipe -module -avoid-version ../../../../src/liboscada.la -lsqlite3 -Wl,--as-needed -o bd_SQLite.la -rpath /usr/lib64/openscada bd_SQLite_la-bd_sqlite.lo libtool: link: x86_64-pc-linux-gnu-g++ -fPIC -DPIC -shared -nostdlib /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtbeginS.o .libs/bd_SQLite_la-bd_sqlite.o -Wl,-rpath -Wl,/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/.libs ../../../../src/.libs/liboscada.so -lpcre -lz -lcrypt -ldl -lsqlite3 -Wl,--as-needed -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64 -L/lib/../lib64 -L/usr/lib/../lib64 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../x86_64-pc-linux-gnu/lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crtn.o -O2 -march=native -pthread -Wl,-soname -Wl,bd_SQLite.so -o .libs/bd_SQLite.so libtool: link: ( cd ".libs" && rm -f "bd_SQLite.la" && ln -s "../bd_SQLite.la" "bd_SQLite.la" ) make[3]: Leaving directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/bd/SQLite' Making all in moduls/bd/DBF make[3]: Entering directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/bd/DBF' /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o bd_DBF_la-dbf_mod.lo `test -f 'dbf_mod.cpp' || echo './'`dbf_mod.cpp /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o bd_DBF_la-dbf.lo `test -f 'dbf.cpp' || echo './'`dbf.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c dbf.cpp -fPIC -DPIC -o .libs/bd_DBF_la-dbf.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c dbf_mod.cpp -fPIC -DPIC -o .libs/bd_DBF_la-dbf_mod.o dbf_mod.cpp: In member function ‘virtual void BDDBF::MBD::allowList(std::vector >&) const’: dbf_mod.cpp:131:48: warning: ‘int readdir_r(DIR*, dirent*, dirent**)’ is deprecated [-Wdeprecated-declarations] while(readdir_r(IdDir,scan_dirent,&scan_rez) == 0 && scan_rez) { ^ In file included from dbf_mod.cpp:27:0: /usr/include/dirent.h:183:12: note: declared here extern int readdir_r (DIR *__restrict __dirp, ^~~~~~~~~ /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=link x86_64-pc-linux-gnu-g++ -O2 -march=native -pipe -module -avoid-version ../../../../src/liboscada.la -Wl,--as-needed -o bd_DBF.la -rpath /usr/lib64/openscada bd_DBF_la-dbf_mod.lo bd_DBF_la-dbf.lo libtool: link: x86_64-pc-linux-gnu-g++ -fPIC -DPIC -shared -nostdlib /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtbeginS.o .libs/bd_DBF_la-dbf_mod.o .libs/bd_DBF_la-dbf.o -Wl,-rpath -Wl,/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/.libs ../../../../src/.libs/liboscada.so -lpcre -lz -lcrypt -ldl -Wl,--as-needed -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64 -L/lib/../lib64 -L/usr/lib/../lib64 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../x86_64-pc-linux-gnu/lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crtn.o -O2 -march=native -pthread -Wl,-soname -Wl,bd_DBF.so -o .libs/bd_DBF.so libtool: link: ( cd ".libs" && rm -f "bd_DBF.la" && ln -s "../bd_DBF.la" "bd_DBF.la" ) make[3]: Leaving directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/bd/DBF' Making all in moduls/daq/JavaLikeCalc make[3]: Entering directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/daq/JavaLikeCalc' /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o daq_JavaLikeCalc_la-virtual.lo `test -f 'virtual.cpp' || echo './'`virtual.cpp /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o daq_JavaLikeCalc_la-freelib.lo `test -f 'freelib.cpp' || echo './'`freelib.cpp /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o daq_JavaLikeCalc_la-freefunc.lo `test -f 'freefunc.cpp' || echo './'`freefunc.cpp \ \ /bin/sh ../../../../ylwrap `test -f 'func_analise.ypp' || echo './'`func_analise.ypp y.tab.c daq_JavaLikeCalc_la-func_analise.cpp y.tab.h `echo daq_JavaLikeCalc_la-func_analise.cpp | sed -e s/cc$/hh/ -e s/cpp$/hpp/ -e s/cxx$/hxx/ -e s/c++$/h++/ -e s/c$/h/` y.output daq_JavaLikeCalc_la-func_analise.output -- bison -y /var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/daq/JavaLikeCalc/func_analise.ypp: warning: 136 shift/reduce conflicts [-Wconflicts-sr] libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c virtual.cpp -fPIC -DPIC -o .libs/daq_JavaLikeCalc_la-virtual.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c freefunc.cpp -fPIC -DPIC -o .libs/daq_JavaLikeCalc_la-freefunc.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c freelib.cpp -fPIC -DPIC -o .libs/daq_JavaLikeCalc_la-freelib.o /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o daq_JavaLikeCalc_la-daq_JavaLikeCalc_la-func_analise.lo `test -f 'daq_JavaLikeCalc_la-func_analise.cpp' || echo './'`daq_JavaLikeCalc_la-func_analise.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c daq_JavaLikeCalc_la-func_analise.cpp -fPIC -DPIC -o .libs/daq_JavaLikeCalc_la-daq_JavaLikeCalc_la-func_analise.o /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=link x86_64-pc-linux-gnu-g++ -O2 -march=native -pipe -module -avoid-version ../../../../src/liboscada.la -Wl,--as-needed -o daq_JavaLikeCalc.la -rpath /usr/lib64/openscada daq_JavaLikeCalc_la-virtual.lo daq_JavaLikeCalc_la-freelib.lo daq_JavaLikeCalc_la-freefunc.lo daq_JavaLikeCalc_la-daq_JavaLikeCalc_la-func_analise.lo libtool: link: x86_64-pc-linux-gnu-g++ -fPIC -DPIC -shared -nostdlib /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtbeginS.o .libs/daq_JavaLikeCalc_la-virtual.o .libs/daq_JavaLikeCalc_la-freelib.o .libs/daq_JavaLikeCalc_la-freefunc.o .libs/daq_JavaLikeCalc_la-daq_JavaLikeCalc_la-func_analise.o -Wl,-rpath -Wl,/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/.libs ../../../../src/.libs/liboscada.so -lpcre -lz -lcrypt -ldl -Wl,--as-needed -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64 -L/lib/../lib64 -L/usr/lib/../lib64 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../x86_64-pc-linux-gnu/lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crtn.o -O2 -march=native -pthread -Wl,-soname -Wl,daq_JavaLikeCalc.so -o .libs/daq_JavaLikeCalc.so libtool: link: ( cd ".libs" && rm -f "daq_JavaLikeCalc.la" && ln -s "../daq_JavaLikeCalc.la" "daq_JavaLikeCalc.la" ) make[3]: Leaving directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/daq/JavaLikeCalc' Making all in moduls/daq/LogicLev make[3]: Entering directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/daq/LogicLev' /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o daq_LogicLev_la-logiclev.lo `test -f 'logiclev.cpp' || echo './'`logiclev.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c logiclev.cpp -fPIC -DPIC -o .libs/daq_LogicLev_la-logiclev.o /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=link x86_64-pc-linux-gnu-g++ -O2 -march=native -pipe -module -avoid-version ../../../../src/liboscada.la -Wl,--as-needed -o daq_LogicLev.la -rpath /usr/lib64/openscada daq_LogicLev_la-logiclev.lo libtool: link: x86_64-pc-linux-gnu-g++ -fPIC -DPIC -shared -nostdlib /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtbeginS.o .libs/daq_LogicLev_la-logiclev.o -Wl,-rpath -Wl,/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/.libs ../../../../src/.libs/liboscada.so -lpcre -lz -lcrypt -ldl -Wl,--as-needed -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64 -L/lib/../lib64 -L/usr/lib/../lib64 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../x86_64-pc-linux-gnu/lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crtn.o -O2 -march=native -pthread -Wl,-soname -Wl,daq_LogicLev.so -o .libs/daq_LogicLev.so libtool: link: ( cd ".libs" && rm -f "daq_LogicLev.la" && ln -s "../daq_LogicLev.la" "daq_LogicLev.la" ) make[3]: Leaving directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/daq/LogicLev' Making all in moduls/daq/BlockCalc make[3]: Entering directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/daq/BlockCalc' /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o daq_BlockCalc_la-virtual.lo `test -f 'virtual.cpp' || echo './'`virtual.cpp /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o daq_BlockCalc_la-block.lo `test -f 'block.cpp' || echo './'`block.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c virtual.cpp -fPIC -DPIC -o .libs/daq_BlockCalc_la-virtual.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c block.cpp -fPIC -DPIC -o .libs/daq_BlockCalc_la-block.o /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=link x86_64-pc-linux-gnu-g++ -O2 -march=native -pipe -module -avoid-version ../../../../src/liboscada.la -Wl,--as-needed -o daq_BlockCalc.la -rpath /usr/lib64/openscada daq_BlockCalc_la-virtual.lo daq_BlockCalc_la-block.lo libtool: link: x86_64-pc-linux-gnu-g++ -fPIC -DPIC -shared -nostdlib /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtbeginS.o .libs/daq_BlockCalc_la-virtual.o .libs/daq_BlockCalc_la-block.o -Wl,-rpath -Wl,/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/.libs ../../../../src/.libs/liboscada.so -lpcre -lz -lcrypt -ldl -Wl,--as-needed -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64 -L/lib/../lib64 -L/usr/lib/../lib64 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../x86_64-pc-linux-gnu/lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crtn.o -O2 -march=native -pthread -Wl,-soname -Wl,daq_BlockCalc.so -o .libs/daq_BlockCalc.so libtool: link: ( cd ".libs" && rm -f "daq_BlockCalc.la" && ln -s "../daq_BlockCalc.la" "daq_BlockCalc.la" ) make[3]: Leaving directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/daq/BlockCalc' Making all in moduls/daq/DAQGate make[3]: Entering directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/daq/DAQGate' /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o daq_DAQGate_la-daq_gate.lo `test -f 'daq_gate.cpp' || echo './'`daq_gate.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c daq_gate.cpp -fPIC -DPIC -o .libs/daq_DAQGate_la-daq_gate.o /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=link x86_64-pc-linux-gnu-g++ -O2 -march=native -pipe -module -avoid-version ../../../../src/liboscada.la -Wl,--as-needed -o daq_DAQGate.la -rpath /usr/lib64/openscada daq_DAQGate_la-daq_gate.lo libtool: link: x86_64-pc-linux-gnu-g++ -fPIC -DPIC -shared -nostdlib /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtbeginS.o .libs/daq_DAQGate_la-daq_gate.o -Wl,-rpath -Wl,/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/.libs ../../../../src/.libs/liboscada.so -lpcre -lz -lcrypt -ldl -Wl,--as-needed -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64 -L/lib/../lib64 -L/usr/lib/../lib64 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../x86_64-pc-linux-gnu/lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crtn.o -O2 -march=native -pthread -Wl,-soname -Wl,daq_DAQGate.so -o .libs/daq_DAQGate.so libtool: link: ( cd ".libs" && rm -f "daq_DAQGate.la" && ln -s "../daq_DAQGate.la" "daq_DAQGate.la" ) make[3]: Leaving directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/daq/DAQGate' Making all in moduls/daq/System make[3]: Entering directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/daq/System' /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o daq_System_la-os_contr.lo `test -f 'os_contr.cpp' || echo './'`os_contr.cpp /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o daq_System_la-da_cpu.lo `test -f 'da_cpu.cpp' || echo './'`da_cpu.cpp /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o daq_System_la-da_mem.lo `test -f 'da_mem.cpp' || echo './'`da_mem.cpp /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o daq_System_la-da_uptime.lo `test -f 'da_uptime.cpp' || echo './'`da_uptime.cpp /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o daq_System_la-da_hddtemp.lo `test -f 'da_hddtemp.cpp' || echo './'`da_hddtemp.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c os_contr.cpp -fPIC -DPIC -o .libs/daq_System_la-os_contr.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c da_cpu.cpp -fPIC -DPIC -o .libs/daq_System_la-da_cpu.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c da_mem.cpp -fPIC -DPIC -o .libs/daq_System_la-da_mem.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c da_uptime.cpp -fPIC -DPIC -o .libs/daq_System_la-da_uptime.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c da_hddtemp.cpp -fPIC -DPIC -o .libs/daq_System_la-da_hddtemp.o /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o daq_System_la-da_sensors.lo `test -f 'da_sensors.cpp' || echo './'`da_sensors.cpp /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o daq_System_la-da_smart.lo `test -f 'da_smart.cpp' || echo './'`da_smart.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c da_sensors.cpp -fPIC -DPIC -o .libs/daq_System_la-da_sensors.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c da_smart.cpp -fPIC -DPIC -o .libs/daq_System_la-da_smart.o /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o daq_System_la-da_hddstat.lo `test -f 'da_hddstat.cpp' || echo './'`da_hddstat.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c da_hddstat.cpp -fPIC -DPIC -o .libs/daq_System_la-da_hddstat.o /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o daq_System_la-da_netstat.lo `test -f 'da_netstat.cpp' || echo './'`da_netstat.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c da_netstat.cpp -fPIC -DPIC -o .libs/daq_System_la-da_netstat.o /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o daq_System_la-da_ups.lo `test -f 'da_ups.cpp' || echo './'`da_ups.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c da_ups.cpp -fPIC -DPIC -o .libs/daq_System_la-da_ups.o /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o daq_System_la-da_fs.lo `test -f 'da_fs.cpp' || echo './'`da_fs.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c da_fs.cpp -fPIC -DPIC -o .libs/daq_System_la-da_fs.o /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o daq_System_la-da_qsensor.lo `test -f 'da_qsensor.cpp' || echo './'`da_qsensor.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c da_qsensor.cpp -fPIC -DPIC -o .libs/daq_System_la-da_qsensor.o /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=link x86_64-pc-linux-gnu-g++ -O2 -march=native -pipe -module -avoid-version ../../../../src/liboscada.la -lsensors -Wl,--as-needed -o daq_System.la -rpath /usr/lib64/openscada daq_System_la-os_contr.lo daq_System_la-da_cpu.lo daq_System_la-da_mem.lo daq_System_la-da_uptime.lo daq_System_la-da_hddtemp.lo daq_System_la-da_sensors.lo daq_System_la-da_smart.lo daq_System_la-da_hddstat.lo daq_System_la-da_netstat.lo daq_System_la-da_ups.lo daq_System_la-da_fs.lo daq_System_la-da_qsensor.lo libtool: link: x86_64-pc-linux-gnu-g++ -fPIC -DPIC -shared -nostdlib /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtbeginS.o .libs/daq_System_la-os_contr.o .libs/daq_System_la-da_cpu.o .libs/daq_System_la-da_mem.o .libs/daq_System_la-da_uptime.o .libs/daq_System_la-da_hddtemp.o .libs/daq_System_la-da_sensors.o .libs/daq_System_la-da_smart.o .libs/daq_System_la-da_hddstat.o .libs/daq_System_la-da_netstat.o .libs/daq_System_la-da_ups.o .libs/daq_System_la-da_fs.o .libs/daq_System_la-da_qsensor.o -Wl,-rpath -Wl,/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/.libs ../../../../src/.libs/liboscada.so -lpcre -lz -lcrypt -ldl -lsensors -Wl,--as-needed -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64 -L/lib/../lib64 -L/usr/lib/../lib64 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../x86_64-pc-linux-gnu/lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crtn.o -O2 -march=native -pthread -Wl,-soname -Wl,daq_System.so -o .libs/daq_System.so libtool: link: ( cd ".libs" && rm -f "daq_System.la" && ln -s "../daq_System.la" "daq_System.la" ) make[3]: Leaving directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/daq/System' Making all in moduls/daq/ModBus make[3]: Entering directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/daq/ModBus' /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o daq_ModBus_la-moduls.lo `test -f 'moduls.cpp' || echo './'`moduls.cpp /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o daq_ModBus_la-modbus_daq.lo `test -f 'modbus_daq.cpp' || echo './'`modbus_daq.cpp /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o daq_ModBus_la-modbus_prt.lo `test -f 'modbus_prt.cpp' || echo './'`modbus_prt.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c moduls.cpp -fPIC -DPIC -o .libs/daq_ModBus_la-moduls.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c modbus_prt.cpp -fPIC -DPIC -o .libs/daq_ModBus_la-modbus_prt.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c modbus_daq.cpp -fPIC -DPIC -o .libs/daq_ModBus_la-modbus_daq.o /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=link x86_64-pc-linux-gnu-g++ -O2 -march=native -pipe -module -avoid-version ../../../../src/liboscada.la -Wl,--as-needed -o daq_ModBus.la -rpath /usr/lib64/openscada daq_ModBus_la-moduls.lo daq_ModBus_la-modbus_daq.lo daq_ModBus_la-modbus_prt.lo libtool: link: x86_64-pc-linux-gnu-g++ -fPIC -DPIC -shared -nostdlib /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtbeginS.o .libs/daq_ModBus_la-moduls.o .libs/daq_ModBus_la-modbus_daq.o .libs/daq_ModBus_la-modbus_prt.o -Wl,-rpath -Wl,/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/.libs ../../../../src/.libs/liboscada.so -lpcre -lz -lcrypt -ldl -Wl,--as-needed -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64 -L/lib/../lib64 -L/usr/lib/../lib64 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../x86_64-pc-linux-gnu/lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crtn.o -O2 -march=native -pthread -Wl,-soname -Wl,daq_ModBus.so -o .libs/daq_ModBus.so libtool: link: ( cd ".libs" && rm -f "daq_ModBus.la" && ln -s "../daq_ModBus.la" "daq_ModBus.la" ) make[3]: Leaving directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/daq/ModBus' Making all in moduls/daq/SoundCard make[3]: Entering directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/daq/SoundCard' /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o daq_SoundCard_la-sound.lo `test -f 'sound.cpp' || echo './'`sound.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c sound.cpp -fPIC -DPIC -o .libs/daq_SoundCard_la-sound.o /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=link x86_64-pc-linux-gnu-g++ -O2 -march=native -pipe -module -avoid-version ../../../../src/liboscada.la -Wl,--as-needed -o daq_SoundCard.la -rpath /usr/lib64/openscada daq_SoundCard_la-sound.lo -lportaudio libtool: link: x86_64-pc-linux-gnu-g++ -fPIC -DPIC -shared -nostdlib /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtbeginS.o .libs/daq_SoundCard_la-sound.o -Wl,-rpath -Wl,/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/.libs ../../../../src/.libs/liboscada.so -lpcre -lz -lcrypt -ldl -Wl,--as-needed -lportaudio -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64 -L/lib/../lib64 -L/usr/lib/../lib64 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../x86_64-pc-linux-gnu/lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crtn.o -O2 -march=native -pthread -Wl,-soname -Wl,daq_SoundCard.so -o .libs/daq_SoundCard.so libtool: link: ( cd ".libs" && rm -f "daq_SoundCard.la" && ln -s "../daq_SoundCard.la" "daq_SoundCard.la" ) make[3]: Leaving directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/daq/SoundCard' Making all in moduls/daq/BFN make[3]: Entering directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/daq/BFN' /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o daq_BFN_la-mod_BFN.lo `test -f 'mod_BFN.cpp' || echo './'`mod_BFN.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c mod_BFN.cpp -fPIC -DPIC -o .libs/daq_BFN_la-mod_BFN.o /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=link x86_64-pc-linux-gnu-g++ -O2 -march=native -pipe -module -avoid-version ../../../../src/liboscada.la -Wl,--as-needed -o daq_BFN.la -rpath /usr/lib64/openscada daq_BFN_la-mod_BFN.lo libtool: link: x86_64-pc-linux-gnu-g++ -fPIC -DPIC -shared -nostdlib /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtbeginS.o .libs/daq_BFN_la-mod_BFN.o -Wl,-rpath -Wl,/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/.libs ../../../../src/.libs/liboscada.so -lpcre -lz -lcrypt -ldl -Wl,--as-needed -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64 -L/lib/../lib64 -L/usr/lib/../lib64 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../x86_64-pc-linux-gnu/lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crtn.o -O2 -march=native -pthread -Wl,-soname -Wl,daq_BFN.so -o .libs/daq_BFN.so libtool: link: ( cd ".libs" && rm -f "daq_BFN.la" && ln -s "../daq_BFN.la" "daq_BFN.la" ) make[3]: Leaving directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/daq/BFN' Making all in moduls/daq/AMRDevs make[3]: Entering directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/daq/AMRDevs' /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o daq_AMRDevs_la-mod_amr.lo `test -f 'mod_amr.cpp' || echo './'`mod_amr.cpp /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o daq_AMRDevs_la-da_Kontar.lo `test -f 'da_Kontar.cpp' || echo './'`da_Kontar.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c mod_amr.cpp -fPIC -DPIC -o .libs/daq_AMRDevs_la-mod_amr.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c da_Kontar.cpp -fPIC -DPIC -o .libs/daq_AMRDevs_la-da_Kontar.o /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=link x86_64-pc-linux-gnu-g++ -O2 -march=native -pipe -module -avoid-version ../../../../src/liboscada.la -Wl,--as-needed -o daq_AMRDevs.la -rpath /usr/lib64/openscada daq_AMRDevs_la-mod_amr.lo daq_AMRDevs_la-da_Kontar.lo libtool: link: x86_64-pc-linux-gnu-g++ -fPIC -DPIC -shared -nostdlib /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtbeginS.o .libs/daq_AMRDevs_la-mod_amr.o .libs/daq_AMRDevs_la-da_Kontar.o -Wl,-rpath -Wl,/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/.libs ../../../../src/.libs/liboscada.so -lpcre -lz -lcrypt -ldl -Wl,--as-needed -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64 -L/lib/../lib64 -L/usr/lib/../lib64 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../x86_64-pc-linux-gnu/lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crtn.o -O2 -march=native -pthread -Wl,-soname -Wl,daq_AMRDevs.so -o .libs/daq_AMRDevs.so libtool: link: ( cd ".libs" && rm -f "daq_AMRDevs.la" && ln -s "../daq_AMRDevs.la" "daq_AMRDevs.la" ) make[3]: Leaving directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/daq/AMRDevs' Making all in moduls/arhiv/FSArch make[3]: Entering directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/arhiv/FSArch' /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o arh_FSArch_la-base.lo `test -f 'base.cpp' || echo './'`base.cpp /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o arh_FSArch_la-mess.lo `test -f 'mess.cpp' || echo './'`mess.cpp /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o arh_FSArch_la-val.lo `test -f 'val.cpp' || echo './'`val.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c base.cpp -fPIC -DPIC -o .libs/arh_FSArch_la-base.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c val.cpp -fPIC -DPIC -o .libs/arh_FSArch_la-val.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c mess.cpp -fPIC -DPIC -o .libs/arh_FSArch_la-mess.o mess.cpp: In member function ‘void FSArch::ModMArch::checkArchivator(bool)’: mess.cpp:282:45: warning: ‘int readdir_r(DIR*, dirent*, dirent**)’ is deprecated [-Wdeprecated-declarations] while(readdir_r(IdDir,scan_dirent,&scan_rez) == 0 && scan_rez) { ^ In file included from mess.cpp:25:0: /usr/include/dirent.h:183:12: note: declared here extern int readdir_r (DIR *__restrict __dirp, ^~~~~~~~~ mess.cpp: In member function ‘void FSArch::MFileArch::attach(const string&, bool)’: mess.cpp:611:65: warning: format ‘%hhd’ expects argument of type ‘signed char*’, but argument 6 has type ‘bool*’ [-Wformat=] if(sscanf(buf,"%lx %lx %99s %hhd",&mBeg,&mEnd,bChars,&mXML) == 4) { mChars = bChars; infoOK = true; } ~~~~~^ val.cpp: In member function ‘bool FSArch::ModVArch::filePrmGet(const string&, std::__cxx11::string*, OSCADA::TFld::Type*, int64_t*, int64_t*, int64_t*)’: val.cpp:194:70: warning: format ‘%llx’ expects argument of type ‘long long unsigned int*’, but argument 3 has type ‘int64_t* {aka long int*}’ [-Wformat=] if(sscanf(ibuf,"%llx %llx %20s %llx %d",&tBeg,&tEnd,buf,&tPer,&tVTp) == 5) { ~~~~~ ^ val.cpp:194:70: warning: format ‘%llx’ expects argument of type ‘long long unsigned int*’, but argument 4 has type ‘int64_t* {aka long int*}’ [-Wformat=] val.cpp:194:70: warning: format ‘%llx’ expects argument of type ‘long long unsigned int*’, but argument 6 has type ‘int64_t* {aka long int*}’ [-Wformat=] val.cpp: In member function ‘void FSArch::ModVArch::checkArchivator(bool, bool)’: val.cpp:309:45: warning: ‘int readdir_r(DIR*, dirent*, dirent**)’ is deprecated [-Wdeprecated-declarations] while(readdir_r(IdDir,scan_dirent,&scan_rez) == 0 && scan_rez) { ^ In file included from val.cpp:25:0: /usr/include/dirent.h:183:12: note: declared here extern int readdir_r (DIR *__restrict __dirp, ^~~~~~~~~ val.cpp: In member function ‘void FSArch::ModVArchEl::checkArchivator(bool, bool)’: val.cpp:728:45: warning: ‘int readdir_r(DIR*, dirent*, dirent**)’ is deprecated [-Wdeprecated-declarations] while(readdir_r(IdDir,scan_dirent,&scan_rez) == 0 && scan_rez) { ^ In file included from val.cpp:25:0: /usr/include/dirent.h:183:12: note: declared here extern int readdir_r (DIR *__restrict __dirp, ^~~~~~~~~ mess.cpp: In member function ‘virtual void FSArch::ModMArch::start()’: mess.cpp:113:11: warning: ignoring return value of ‘ssize_t write(int, const void*, size_t)’, declared with attribute warn_unused_result [-Wunused-result] write(hd, "1", 1); ~~~~~^~~~~~~~~~~~ val.cpp: In member function ‘virtual void FSArch::ModVArch::start()’: val.cpp:124:11: warning: ignoring return value of ‘ssize_t write(int, const void*, size_t)’, declared with attribute warn_unused_result [-Wunused-result] write(hd, "1", 1); ~~~~~^~~~~~~~~~~~ /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=link x86_64-pc-linux-gnu-g++ -O2 -march=native -pipe -module -avoid-version ../../../../src/liboscada.la -Wl,--as-needed -o arh_FSArch.la -rpath /usr/lib64/openscada arh_FSArch_la-base.lo arh_FSArch_la-mess.lo arh_FSArch_la-val.lo libtool: link: x86_64-pc-linux-gnu-g++ -fPIC -DPIC -shared -nostdlib /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtbeginS.o .libs/arh_FSArch_la-base.o .libs/arh_FSArch_la-mess.o .libs/arh_FSArch_la-val.o -Wl,-rpath -Wl,/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/.libs ../../../../src/.libs/liboscada.so -lpcre -lz -lcrypt -ldl -Wl,--as-needed -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64 -L/lib/../lib64 -L/usr/lib/../lib64 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../x86_64-pc-linux-gnu/lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crtn.o -O2 -march=native -pthread -Wl,-soname -Wl,arh_FSArch.so -o .libs/arh_FSArch.so libtool: link: ( cd ".libs" && rm -f "arh_FSArch.la" && ln -s "../arh_FSArch.la" "arh_FSArch.la" ) make[3]: Leaving directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/arhiv/FSArch' Making all in moduls/arhiv/DBArch make[3]: Entering directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/arhiv/DBArch' /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o arh_DBArch_la-arch.lo `test -f 'arch.cpp' || echo './'`arch.cpp /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o arh_DBArch_la-mess.lo `test -f 'mess.cpp' || echo './'`mess.cpp /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o arh_DBArch_la-val.lo `test -f 'val.cpp' || echo './'`val.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c arch.cpp -fPIC -DPIC -o .libs/arh_DBArch_la-arch.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c mess.cpp -fPIC -DPIC -o .libs/arh_DBArch_la-mess.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c val.cpp -fPIC -DPIC -o .libs/arh_DBArch_la-val.o /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=link x86_64-pc-linux-gnu-g++ -O2 -march=native -pipe -module -avoid-version ../../../../src/liboscada.la -Wl,--as-needed -o arh_DBArch.la -rpath /usr/lib64/openscada arh_DBArch_la-arch.lo arh_DBArch_la-mess.lo arh_DBArch_la-val.lo libtool: link: x86_64-pc-linux-gnu-g++ -fPIC -DPIC -shared -nostdlib /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtbeginS.o .libs/arh_DBArch_la-arch.o .libs/arh_DBArch_la-mess.o .libs/arh_DBArch_la-val.o -Wl,-rpath -Wl,/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/.libs ../../../../src/.libs/liboscada.so -lpcre -lz -lcrypt -ldl -Wl,--as-needed -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64 -L/lib/../lib64 -L/usr/lib/../lib64 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../x86_64-pc-linux-gnu/lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crtn.o -O2 -march=native -pthread -Wl,-soname -Wl,arh_DBArch.so -o .libs/arh_DBArch.so libtool: link: ( cd ".libs" && rm -f "arh_DBArch.la" && ln -s "../arh_DBArch.la" "arh_DBArch.la" ) make[3]: Leaving directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/arhiv/DBArch' Making all in moduls/transport/Sockets make[3]: Entering directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/transport/Sockets' /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o tr_Sockets_la-socket.lo `test -f 'socket.cpp' || echo './'`socket.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c socket.cpp -fPIC -DPIC -o .libs/tr_Sockets_la-socket.o /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=link x86_64-pc-linux-gnu-g++ -O2 -march=native -pipe -module -avoid-version ../../../../src/liboscada.la -Wl,--as-needed -o tr_Sockets.la -rpath /usr/lib64/openscada tr_Sockets_la-socket.lo libtool: link: x86_64-pc-linux-gnu-g++ -fPIC -DPIC -shared -nostdlib /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtbeginS.o .libs/tr_Sockets_la-socket.o -Wl,-rpath -Wl,/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/.libs ../../../../src/.libs/liboscada.so -lpcre -lz -lcrypt -ldl -Wl,--as-needed -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64 -L/lib/../lib64 -L/usr/lib/../lib64 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../x86_64-pc-linux-gnu/lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crtn.o -O2 -march=native -pthread -Wl,-soname -Wl,tr_Sockets.so -o .libs/tr_Sockets.so libtool: link: ( cd ".libs" && rm -f "tr_Sockets.la" && ln -s "../tr_Sockets.la" "tr_Sockets.la" ) make[3]: Leaving directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/transport/Sockets' Making all in moduls/transport/Serial make[3]: Entering directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/transport/Serial' /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o tr_Serial_la-mod_serial.lo `test -f 'mod_serial.cpp' || echo './'`mod_serial.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c mod_serial.cpp -fPIC -DPIC -o .libs/tr_Serial_la-mod_serial.o /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=link x86_64-pc-linux-gnu-g++ -O2 -march=native -pipe -module -avoid-version ../../../../src/liboscada.la -Wl,--as-needed -o tr_Serial.la -rpath /usr/lib64/openscada tr_Serial_la-mod_serial.lo libtool: link: x86_64-pc-linux-gnu-g++ -fPIC -DPIC -shared -nostdlib /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtbeginS.o .libs/tr_Serial_la-mod_serial.o -Wl,-rpath -Wl,/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/.libs ../../../../src/.libs/liboscada.so -lpcre -lz -lcrypt -ldl -Wl,--as-needed -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64 -L/lib/../lib64 -L/usr/lib/../lib64 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../x86_64-pc-linux-gnu/lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crtn.o -O2 -march=native -pthread -Wl,-soname -Wl,tr_Serial.so -o .libs/tr_Serial.so libtool: link: ( cd ".libs" && rm -f "tr_Serial.la" && ln -s "../tr_Serial.la" "tr_Serial.la" ) make[3]: Leaving directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/transport/Serial' Making all in moduls/transport/SSL make[3]: Entering directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/transport/SSL' /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o tr_SSL_la-modssl.lo `test -f 'modssl.cpp' || echo './'`modssl.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c modssl.cpp -fPIC -DPIC -o .libs/tr_SSL_la-modssl.o /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=link x86_64-pc-linux-gnu-g++ -O2 -march=native -pipe -module -avoid-version ../../../../src/liboscada.la -Wl,--as-needed -o tr_SSL.la -rpath /usr/lib64/openscada tr_SSL_la-modssl.lo -lssl -lcrypto libtool: link: x86_64-pc-linux-gnu-g++ -fPIC -DPIC -shared -nostdlib /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtbeginS.o .libs/tr_SSL_la-modssl.o -Wl,-rpath -Wl,/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/.libs ../../../../src/.libs/liboscada.so -lpcre -lz -lcrypt -ldl -Wl,--as-needed -lssl -lcrypto -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64 -L/lib/../lib64 -L/usr/lib/../lib64 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../x86_64-pc-linux-gnu/lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crtn.o -O2 -march=native -pthread -Wl,-soname -Wl,tr_SSL.so -o .libs/tr_SSL.so .libs/tr_SSL_la-modssl.o: In function `MSSL::TSocketIn::Task(void*)': modssl.cpp:(.text+0x6ec4): warning: the use of `tmpnam' is dangerous, better use `mkstemp' libtool: link: ( cd ".libs" && rm -f "tr_SSL.la" && ln -s "../tr_SSL.la" "tr_SSL.la" ) make[3]: Leaving directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/transport/SSL' Making all in moduls/protocol/SelfSystem make[3]: Entering directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/protocol/SelfSystem' /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o prot_SelfSystem_la-self.lo `test -f 'self.cpp' || echo './'`self.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c self.cpp -fPIC -DPIC -o .libs/prot_SelfSystem_la-self.o /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=link x86_64-pc-linux-gnu-g++ -O2 -march=native -pipe -module -avoid-version ../../../../src/liboscada.la -Wl,--as-needed -o prot_SelfSystem.la -rpath /usr/lib64/openscada prot_SelfSystem_la-self.lo libtool: link: x86_64-pc-linux-gnu-g++ -fPIC -DPIC -shared -nostdlib /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtbeginS.o .libs/prot_SelfSystem_la-self.o -Wl,-rpath -Wl,/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/.libs ../../../../src/.libs/liboscada.so -lpcre -lz -lcrypt -ldl -Wl,--as-needed -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64 -L/lib/../lib64 -L/usr/lib/../lib64 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../x86_64-pc-linux-gnu/lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crtn.o -O2 -march=native -pthread -Wl,-soname -Wl,prot_SelfSystem.so -o .libs/prot_SelfSystem.so libtool: link: ( cd ".libs" && rm -f "prot_SelfSystem.la" && ln -s "../prot_SelfSystem.la" "prot_SelfSystem.la" ) make[3]: Leaving directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/protocol/SelfSystem' Making all in moduls/protocol/UserProtocol make[3]: Entering directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/protocol/UserProtocol' /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o prot_UserProtocol_la-user_prt.lo `test -f 'user_prt.cpp' || echo './'`user_prt.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c user_prt.cpp -fPIC -DPIC -o .libs/prot_UserProtocol_la-user_prt.o /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=link x86_64-pc-linux-gnu-g++ -O2 -march=native -pipe -module -avoid-version ../../../../src/liboscada.la -Wl,--as-needed -o prot_UserProtocol.la -rpath /usr/lib64/openscada prot_UserProtocol_la-user_prt.lo libtool: link: x86_64-pc-linux-gnu-g++ -fPIC -DPIC -shared -nostdlib /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtbeginS.o .libs/prot_UserProtocol_la-user_prt.o -Wl,-rpath -Wl,/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/.libs ../../../../src/.libs/liboscada.so -lpcre -lz -lcrypt -ldl -Wl,--as-needed -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64 -L/lib/../lib64 -L/usr/lib/../lib64 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../x86_64-pc-linux-gnu/lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crtn.o -O2 -march=native -pthread -Wl,-soname -Wl,prot_UserProtocol.so -o .libs/prot_UserProtocol.so libtool: link: ( cd ".libs" && rm -f "prot_UserProtocol.la" && ln -s "../prot_UserProtocol.la" "prot_UserProtocol.la" ) make[3]: Leaving directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/protocol/UserProtocol' Making all in moduls/protocol/HTTP make[3]: Entering directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/protocol/HTTP' /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o prot_HTTP_la-http.lo `test -f 'http.cpp' || echo './'`http.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c http.cpp -fPIC -DPIC -o .libs/prot_HTTP_la-http.o /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=link x86_64-pc-linux-gnu-g++ -O2 -march=native -pipe -module -avoid-version ../../../../src/liboscada.la -Wl,--as-needed -o prot_HTTP.la -rpath /usr/lib64/openscada prot_HTTP_la-http.lo libtool: link: x86_64-pc-linux-gnu-g++ -fPIC -DPIC -shared -nostdlib /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtbeginS.o .libs/prot_HTTP_la-http.o -Wl,-rpath -Wl,/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/.libs ../../../../src/.libs/liboscada.so -lpcre -lz -lcrypt -ldl -Wl,--as-needed -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64 -L/lib/../lib64 -L/usr/lib/../lib64 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../x86_64-pc-linux-gnu/lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crtn.o -O2 -march=native -pthread -Wl,-soname -Wl,prot_HTTP.so -o .libs/prot_HTTP.so libtool: link: ( cd ".libs" && rm -f "prot_HTTP.la" && ln -s "../prot_HTTP.la" "prot_HTTP.la" ) make[3]: Leaving directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/protocol/HTTP' Making all in moduls/ui/VCAEngine make[3]: Entering directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/ui/VCAEngine' /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o ui_VCAEngine_la-vcaengine.lo `test -f 'vcaengine.cpp' || echo './'`vcaengine.cpp /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o ui_VCAEngine_la-libwidg.lo `test -f 'libwidg.cpp' || echo './'`libwidg.cpp /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o ui_VCAEngine_la-widget.lo `test -f 'widget.cpp' || echo './'`widget.cpp /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o ui_VCAEngine_la-origwidg.lo `test -f 'origwidg.cpp' || echo './'`origwidg.cpp /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o ui_VCAEngine_la-project.lo `test -f 'project.cpp' || echo './'`project.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c widget.cpp -fPIC -DPIC -o .libs/ui_VCAEngine_la-widget.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c libwidg.cpp -fPIC -DPIC -o .libs/ui_VCAEngine_la-libwidg.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c origwidg.cpp -fPIC -DPIC -o .libs/ui_VCAEngine_la-origwidg.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c vcaengine.cpp -fPIC -DPIC -o .libs/ui_VCAEngine_la-vcaengine.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c project.cpp -fPIC -DPIC -o .libs/ui_VCAEngine_la-project.o /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c -o ui_VCAEngine_la-session.lo `test -f 'session.cpp' || echo './'`session.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -O2 -march=native -pipe -c session.cpp -fPIC -DPIC -o .libs/ui_VCAEngine_la-session.o session.cpp: In member function ‘void VCA::Session::Notify::commCall(bool, bool, std::__cxx11::string&, const string&, const string&)’: session.cpp:973:24: warning: ignoring return value of ‘ssize_t write(int, const void*, size_t)’, declared with attribute warn_unused_result [-Wunused-result] if(hdRes >= 0) { write(hdRes, res.data(), res.size()); close(hdRes); } ~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ session.cpp:975:8: warning: ignoring return value of ‘int system(const char*)’, declared with attribute warn_unused_result [-Wunused-result] system(("en="+i2s(alEn)+" doNtf="+i2s(doNtf)+" doRes="+i2s(doRes)+" res="+resFile+ ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  " mess=\""+TSYS::strEncode(mess,TSYS::SQL)+"\" lang=\""+TSYS::strEncode(lang,TSYS::SQL)+"\" ./"+wcomProc).c_str()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=link x86_64-pc-linux-gnu-g++ -O2 -march=native -pipe -module -avoid-version ../../../../src/liboscada.la -Wl,--as-needed -o ui_VCAEngine.la -rpath /usr/lib64/openscada ui_VCAEngine_la-vcaengine.lo ui_VCAEngine_la-libwidg.lo ui_VCAEngine_la-widget.lo ui_VCAEngine_la-origwidg.lo ui_VCAEngine_la-project.lo ui_VCAEngine_la-session.lo libtool: link: x86_64-pc-linux-gnu-g++ -fPIC -DPIC -shared -nostdlib /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtbeginS.o .libs/ui_VCAEngine_la-vcaengine.o .libs/ui_VCAEngine_la-libwidg.o .libs/ui_VCAEngine_la-widget.o .libs/ui_VCAEngine_la-origwidg.o .libs/ui_VCAEngine_la-project.o .libs/ui_VCAEngine_la-session.o -Wl,-rpath -Wl,/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/.libs ../../../../src/.libs/liboscada.so -lpcre -lz -lcrypt -ldl -Wl,--as-needed -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64 -L/lib/../lib64 -L/usr/lib/../lib64 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../x86_64-pc-linux-gnu/lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crtn.o -O2 -march=native -pthread -Wl,-soname -Wl,ui_VCAEngine.so -o .libs/ui_VCAEngine.so libtool: link: ( cd ".libs" && rm -f "ui_VCAEngine.la" && ln -s "../ui_VCAEngine.la" "ui_VCAEngine.la" ) make[3]: Leaving directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/ui/VCAEngine' Making all in moduls/ui/QTStarter make[3]: Entering directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/ui/QTStarter' /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtPrintSupport -I/usr/include/qt5 -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -DQT_SENSORS_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtSensors -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -O2 -march=native -pipe -c -o ui_QTStarter_la-tuimod.lo `test -f 'tuimod.cpp' || echo './'`tuimod.cpp /usr/bin/moc tuimod.h > moc_tuimod.cpp /usr/bin/rcc -name QTStarter qtstarter.qrc -o qrc_qtstarter.cpp /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtPrintSupport -I/usr/include/qt5 -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -DQT_SENSORS_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtSensors -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -O2 -march=native -pipe -c -o ui_QTStarter_la-moc_tuimod.lo `test -f 'moc_tuimod.cpp' || echo './'`moc_tuimod.cpp /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtPrintSupport -I/usr/include/qt5 -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -DQT_SENSORS_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtSensors -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -O2 -march=native -pipe -c -o ui_QTStarter_la-qrc_qtstarter.lo `test -f 'qrc_qtstarter.cpp' || echo './'`qrc_qtstarter.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtPrintSupport -I/usr/include/qt5 -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -DQT_SENSORS_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtSensors -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -O2 -march=native -pipe -c tuimod.cpp -fPIC -DPIC -o .libs/ui_QTStarter_la-tuimod.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtPrintSupport -I/usr/include/qt5 -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -DQT_SENSORS_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtSensors -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -O2 -march=native -pipe -c moc_tuimod.cpp -fPIC -DPIC -o .libs/ui_QTStarter_la-moc_tuimod.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtPrintSupport -I/usr/include/qt5 -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -DQT_SENSORS_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtSensors -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -O2 -march=native -pipe -c qrc_qtstarter.cpp -fPIC -DPIC -o .libs/ui_QTStarter_la-qrc_qtstarter.o tuimod.cpp: In constructor ‘QTStarter::StartDialog::StartDialog()’: tuimod.cpp:1019:49: warning: ‘int readdir_r(DIR*, dirent*, dirent**)’ is deprecated [-Wdeprecated-declarations] while(readdir_r(IdDir,scan_dirent,&scan_rez) == 0 && scan_rez) { ^ In file included from tuimod.cpp:22:0: /usr/include/dirent.h:183:12: note: declared here extern int readdir_r (DIR *__restrict __dirp, ^~~~~~~~~ tuimod.cpp:1051:49: warning: ‘int readdir_r(DIR*, dirent*, dirent**)’ is deprecated [-Wdeprecated-declarations] while(readdir_r(IdDir,scan_dirent,&scan_rez) == 0 && scan_rez) { ^ In file included from tuimod.cpp:22:0: /usr/include/dirent.h:183:12: note: declared here extern int readdir_r (DIR *__restrict __dirp, ^~~~~~~~~ tuimod.cpp: In member function ‘void QTStarter::StartDialog::enterManual()’: tuimod.cpp:1169:30: warning: ignoring return value of ‘int system(const char*)’, declared with attribute warn_unused_result [-Wunused-result] if(findDoc.size()) system(findDoc.c_str()); ~~~~~~^~~~~~~~~~~~~~~~~ /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=link x86_64-pc-linux-gnu-g++ -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtPrintSupport -I/usr/include/qt5 -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -DQT_SENSORS_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtSensors -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -O2 -march=native -pipe -module -avoid-version ../../../../src/liboscada.la -lQt5Widgets -lQt5Gui -lQt5Core -lQt5PrintSupport -lQt5Widgets -lQt5Gui -lQt5Core -lQt5Sensors -lQt5Core -Wl,--as-needed -o ui_QTStarter.la -rpath /usr/lib64/openscada ui_QTStarter_la-tuimod.lo ui_QTStarter_la-moc_tuimod.lo ui_QTStarter_la-qrc_qtstarter.lo libtool: link: x86_64-pc-linux-gnu-g++ -fPIC -DPIC -shared -nostdlib /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtbeginS.o .libs/ui_QTStarter_la-tuimod.o .libs/ui_QTStarter_la-moc_tuimod.o .libs/ui_QTStarter_la-qrc_qtstarter.o -Wl,-rpath -Wl,/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/.libs ../../../../src/.libs/liboscada.so -lpcre -lz -lcrypt -ldl -lQt5PrintSupport -lQt5Widgets -lQt5Gui -lQt5Sensors -lQt5Core -Wl,--as-needed -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64 -L/lib/../lib64 -L/usr/lib/../lib64 -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../x86_64-pc-linux-gnu/lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/crtn.o -O2 -march=native -pthread -Wl,-soname -Wl,ui_QTStarter.so -o .libs/ui_QTStarter.so libtool: link: ( cd ".libs" && rm -f "ui_QTStarter.la" && ln -s "../ui_QTStarter.la" "ui_QTStarter.la" ) make[3]: Leaving directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/ui/QTStarter' Making all in moduls/ui/QTCfg make[3]: Entering directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/ui/QTCfg' /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtPrintSupport -I/usr/include/qt5 -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -O2 -march=native -pipe -c -o ui_QTCfg_la-tuimod.lo `test -f 'tuimod.cpp' || echo './'`tuimod.cpp /usr/bin/rcc -name QTCfg qtcfg.qrc -o qrc_qtcfg.cpp /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtPrintSupport -I/usr/include/qt5 -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -O2 -march=native -pipe -c -o ui_QTCfg_la-qtcfg.lo `test -f 'qtcfg.cpp' || echo './'`qtcfg.cpp /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtPrintSupport -I/usr/include/qt5 -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -O2 -march=native -pipe -c -o ui_QTCfg_la-selfwidg.lo `test -f 'selfwidg.cpp' || echo './'`selfwidg.cpp /usr/bin/moc qtcfg.h > moc_qtcfg.cpp /usr/bin/moc selfwidg.h > moc_selfwidg.cpp /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtPrintSupport -I/usr/include/qt5 -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -O2 -march=native -pipe -c -o ui_QTCfg_la-qrc_qtcfg.lo `test -f 'qrc_qtcfg.cpp' || echo './'`qrc_qtcfg.cpp /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtPrintSupport -I/usr/include/qt5 -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -O2 -march=native -pipe -c -o ui_QTCfg_la-moc_qtcfg.lo `test -f 'moc_qtcfg.cpp' || echo './'`moc_qtcfg.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtPrintSupport -I/usr/include/qt5 -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -O2 -march=native -pipe -c selfwidg.cpp -fPIC -DPIC -o .libs/ui_QTCfg_la-selfwidg.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtPrintSupport -I/usr/include/qt5 -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -O2 -march=native -pipe -c qtcfg.cpp -fPIC -DPIC -o .libs/ui_QTCfg_la-qtcfg.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtPrintSupport -I/usr/include/qt5 -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -O2 -march=native -pipe -c tuimod.cpp -fPIC -DPIC -o .libs/ui_QTCfg_la-tuimod.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtPrintSupport -I/usr/include/qt5 -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -O2 -march=native -pipe -c qrc_qtcfg.cpp -fPIC -DPIC -o .libs/ui_QTCfg_la-qrc_qtcfg.o libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtPrintSupport -I/usr/include/qt5 -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -O2 -march=native -pipe -c moc_qtcfg.cpp -fPIC -DPIC -o .libs/ui_QTCfg_la-moc_qtcfg.o In file included from /usr/include/qt5/QtCore/qthread.h:50:0, from /usr/include/qt5/QtCore/QThread:1, from qtcfg.h:29, from tuimod.cpp:29: /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/include/g++-v7/future:115:56: error: macro "message" requires 4 arguments, but only 1 given : logic_error("std::future_error: " + __ec.message()), _M_code(__ec) ^ In file included from /usr/include/qt5/QtCore/qthread.h:50:0, from /usr/include/qt5/QtCore/QThread:1, from qtcfg.h:29, from qtcfg.cpp:65: /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/include/g++-v7/future:115:56: error: macro "message" requires 4 arguments, but only 1 given : logic_error("std::future_error: " + __ec.message()), _M_code(__ec) ^ /bin/sh ../../../../libtool --tag=CXX --tag=disable-static --mode=compile x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtPrintSupport -I/usr/include/qt5 -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -O2 -march=native -pipe -c -o ui_QTCfg_la-moc_selfwidg.lo `test -f 'moc_selfwidg.cpp' || echo './'`moc_selfwidg.cpp libtool: compile: x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../../../../src -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/include/qt5/QtPrintSupport -I/usr/include/qt5 -I/usr/include/qt5/QtWidgets -I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -O2 -march=native -pipe -c moc_selfwidg.cpp -fPIC -DPIC -o .libs/ui_QTCfg_la-moc_selfwidg.o /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/include/g++-v7/future: In constructor ‘std::future_error::future_error(std::error_code)’: /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/include/g++-v7/future:115:48: error: invalid use of member function ‘std::__cxx11::string std::error_code::message() const’ (did you forget the ‘()’ ?) : logic_error("std::future_error: " + __ec.message()), _M_code(__ec) ~~~~~^~~~~~~ /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/include/g++-v7/future: In constructor ‘std::future_error::future_error(std::error_code)’: /usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/include/g++-v7/future:115:48: error: invalid use of member function ‘std::__cxx11::string std::error_code::message() const’ (did you forget the ‘()’ ?) : logic_error("std::future_error: " + __ec.message()), _M_code(__ec) ~~~~~^~~~~~~ make[3]: *** [Makefile:568: ui_QTCfg_la-tuimod.lo] Error 1 make[3]: *** Waiting for unfinished jobs.... qtcfg.cpp: In member function ‘void QTCFG::ConfApp::enterManual()’: qtcfg.cpp:956:30: warning: ignoring return value of ‘int system(const char*)’, declared with attribute warn_unused_result [-Wunused-result] if(findDoc.size()) system(findDoc.c_str()); ~~~~~~^~~~~~~~~~~~~~~~~ make[3]: *** [Makefile:582: ui_QTCfg_la-qtcfg.lo] Error 1 make[3]: Leaving directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src/moduls/ui/QTCfg' make[2]: *** [Makefile:889: all-recursive] Error 1 make[2]: Leaving directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src' make[1]: *** [Makefile:517: all] Error 2 make[1]: Leaving directory '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0/src' make: *** [Makefile:727: all-recursive] Error 1 * ERROR: dev-util/openscada-0.9.0::local failed (compile phase): * emake failed * * If you need support, post the output of `emerge --info '=dev-util/openscada-0.9.0::local'`, * the complete build log and the output of `emerge -pqv '=dev-util/openscada-0.9.0::local'`. * The complete build log is located at '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/temp/build.log'. * The ebuild environment file is located at '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/temp/environment'. * Working directory: '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0' * S: '/var/calculate/tmp/portage/dev-util/openscada-0.9.0/work/openscada-0.9.0'