Останні повідомлення форума : Subsystem "DAQ"

Functions extending of the module OPC-UA

roman — Tue, 05 Aug 2025 15:07:51 +0300

The task has done mostly in the active development and all other actions you can trace on the DAQ.OPC_UA page!

Module "ICP_DAS" functions extending

roman — Tue, 22 Oct 2024 14:36:38 +0300

Marked DONE, due to there is no way of obtaining devices scheduled to implement.

Module DAQ.DiamondBoards update

roman — Wed, 02 Jan 2013 17:18:15 +0200

Base: Allowed boards FIFO access update and wide support for other "Diamond Systems" boards expand support.
Funding: nope
Begin: 20.12.2012
Priority: middle
State: Done
Project page: http://oscada.org/wiki/Special:MyLanguage/Modules/DiamondBoards
Hardware: Diamond Systems

(+) DSCU driver version update to 6.01.
(+) Rewrite for new concept — single board implementation full to the parameter.
(+) Support for generic boards for main functions.
(+) AI processing by FIFO
(+) Documents update and translate

IEC 60870-5 acquisition protocol implementation

roman — Tue, 23 Oct 2012 16:17:11 +0300

Base: actuality and some requests
Funding: Successful finished. The task result fund is 100% to the real work time (laboriousness).
Priority: high
State: Done
Investors: Ustijancev Michael: 100% to the real work time (laboriousness) and the hardware access
Project page: http://oscada.org/wiki/Special:MyLanguage/Libs/Devices#IEC60870

IEC 60870 part 5 is one of the IEC 60870 set of standards which define systems used for telecontrol (supervisory control and data acquisition) in electrical engineering and power system automation applications. Part 5 provides a communication profile for sending basic telecontrol messages between two systems, which uses permanent directly connected data circuits between the systems.

Implementation status, part 104:
(+) Client-Master: Data exchanging conception.
(+) Client-Master: Data model integration and reflection to the OpenSCADA objects: the template to DAQ.LogicLev, all data (DI, DO, AO) acquisition-gather to object's attribute "items"; manual set attributes for direct representing by "itemsSet"; writing-commands support by object "items" and direct attributes.
(+) Client-Master: Function: STARTDT, STOPDT, TESTFR, Ack, C_IC_NA_1, C_CI_NA_1, C_SC_NA_1, M_SP_NA_1, M_ME_NB_1, C_CS_NA_1
(+) Client-Master: Debug and practical adaptions
(+) Preparing and placing to the OpenSCADA devices library, on the user protocol's conception. Documenting.

New module DAQ.Comedi creation for allow support wide boards on buses ISA, PCI, PCMCIA and USB by "Comedi"

roman — Wed, 26 Sep 2012 12:32:46 +0300

Base: New board "ACL-8113" support implementation
Component: The module of subsystem “Data acquisition”
Funding: nope
Begin: 22.07.2012
Priority: high
State: Finished (04.08.2012)

(+) Load, build and adapting "Comedy" library 0.10.0 and drivers set 0.7.76.
(+) Create new module DAQ.Comedi.
(+) Test new module DAQ.Comedi on boards: Advantech PCL-725, PCL-726 and ADLink ACL-8113.
(+) Build "Comedy" library 0.10.0 for ALTLinux.

Module "ICP_DAS" functions extending

roman — Wed, 26 Sep 2012 11:50:21 +0300

Base: New board "DIO-144" support implementation
Component: The module of subsystem “Data acquisition”
Funding: nope
Begin: 8.07.2012
Priority: low
State: Wait for a "ICP DAS" PCI or a PCIex board to hands or needs

(+) Load, build and adapting "ICP DAS" ISA-boards driver "ixisa-0.17.0".
(+) Rewriting the module for split hardwares ISA-boards and I-8k, i-87k modules.
(+) Expanding the module's ISA-boards part for support all main ISA-boards from "ICP_DAS".
(+) Expanding the module's I-8k and I-87k part for support all main I-8k and I-87k modules from "ICP_DAS".
(-) Load, build and adapting "ICP DAS" PCI and PCIex boards drivers "ixpci" and "ixpio".
(-) New part "PCI" and "PCIex" add to the module and all main boards on the buses support implement.
(+) Append OpenSCADA serial transport using for no LP hardware.
(+) The fast module I-8014 support and integration to OpenSCADA.

New module DAQ.SMH2Gi creation for deep integration to Segnetics SMH2Gi

roman — Mon, 24 Sep 2012 10:02:04 +0300

Base: Order and hardware from "Laboratory of vacuum technologies" (http://e-beam.ru), Vasily Grigoriev
Funding: available
Begin: 10.08.2012
Priority: high
State: Done
Project page: http://wiki.oscada.org/HomePageEn/Doc/SMH2Gi
Hardware: Segnetics SMH2Gi

(+) The module creation.
(+) Cooperate with original execution environment "SMLogiсs" by shared memory variables.
(+) Segnetics internal protocols MR and MC realizing.
(+) Final testing to physical signals flow:
- MC AI, DI read: pass
- MC AO, DO write: pass
- MR DI read: pass
- MR DO write: pass
(+) Document and translation preparing

Functions extending of the module OPC-UA

roman — Tue, 22 Jun 2010 19:01:36 +0300

Base: Plan and Agreements
Component: The "OPC UA" module of “Data acquisition” and “Transport protocols” subsystems
Funding: for move to different LGPL v3 library, Chunks and CreateSubscriptionRequest implementing.
Begin: 7.06.2010
Priority: high

(+) Main secure politics implementation "Base128Rsa15" and "Base256".
(+) 19.08.2013: OPC UA protocol's part for Client and Server is moved to LGPL v3 library for allow and simplify using by other projects.
(+) 19.08.2013: Controller's object is made simply for EndPoints and transports selection and configuration.
(+) 09.12.2013: "Publish" (Subscriptions and MonitoredItems) request processing into the protocol's input part.
(+) Cap for the service RegisterNodeRequest adding
(+) Moving to input protocol's pooling mode instead direct writing and the separated publish processing task. Mostly to simplify.
(+) Authentication support append, for user.
(+) Adapting to B&R Embedded OPC-UA Server specific
(+) Adapting to UAExpert 1.3
(+) Adapting to UAExpert 1.4
(+) Chunks implementation for big requests.