# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2023-04-29 16:01+0300\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=CHARSET\n" "Content-Transfer-Encoding: 8bit\n" msgid "Siemens DAQ and Beckhoff" msgstr "" msgid "Roman Savochenko" msgstr "" msgid "Provides for support of data sources of Siemens PLCs by means of Hilscher CIF cards (using the MPI protocol) and LibnoDave library (or the own implementation) for the rest. Also there is supported the data sources of the firm Beckhoff for the protocol TwinCAT ADS/AMS due it working with data blocks also." msgstr "" msgid "Parameters table" msgstr "" msgid "Simple parameters table" msgstr "" msgid "Acquisition schedule" msgstr "" msgid "Priority of the acquisition task" msgstr "" msgid "Restore timeout, seconds" msgstr "" msgid "Asynchronous write mode" msgstr "" msgid "Connection type" msgstr "" msgid "Remote controller address" msgstr "" msgid "Output transport" msgstr "" msgid "CPU slot of the PLC" msgstr "" msgid "CIF board" msgstr "" msgid "Maximum size of the request block, bytes" msgstr "" msgid "Logical" msgstr "" msgid "Parameter template" msgstr "" msgid "Parameter ID" msgstr "" msgid "Identifier" msgstr "" msgid "Value" msgstr "" msgid "Simple" msgstr "" msgid "Attributes list" msgstr "" msgid "Address" msgstr "" msgid "Speed" msgstr "" msgid "No device" msgstr "" #, c-format msgid "Error the CIF device %d or the device driver." msgstr "" #, c-format msgid "Error starting up the CIF device %d (DevSetHostState(HOST_READY))." msgstr "" #, c-format msgid "DevPutTaskParameter: error the CIF device %d." msgstr "" #, c-format msgid "DevPutMessage: error the CIF device %d." msgstr "" #, c-format msgid "DevGetMessage: error the CIF device %d." msgstr "" #, c-format msgid "Error sending message: %d." msgstr "" #, c-format msgid "Error getting message: %d." msgstr "" #, c-format msgid "%d:The board %d is not present." msgstr "" #, c-format msgid "%d:Error sending request: %d." msgstr "" #, c-format msgid "%d:Error getting request: %d." msgstr "" msgid "CIF" msgstr "" msgid "Status" msgstr "" msgid "CIF driver" msgstr "" msgid "CIF devices" msgstr "" msgid "Board" msgstr "" msgid "Firmware name" msgstr "" msgid "Firmware version" msgstr "" msgid "Physical address" msgstr "" msgid "IRQ" msgstr "" msgid "PB address" msgstr "" msgid "PB speed" msgstr "" msgid "CIF device" msgstr "" msgid "Live stations list" msgstr "" #, c-format msgid "Error the board %d." msgstr "" msgid "9600Baud" msgstr "" msgid "19.2kBaud" msgstr "" msgid "93.75kBaud" msgstr "" msgid "187.5kBaud" msgstr "" msgid "500kBaud" msgstr "" msgid "1.5MBaud" msgstr "" msgid "3MBaud" msgstr "" msgid "6MBaud" msgstr "" msgid "12MBaud" msgstr "" msgid " : -------" msgstr "" msgid " : Active station" msgstr "" msgid " : Passive station" msgstr "" msgid "Task terminated! " msgstr "" msgid "Error connecting." msgstr "" #, c-format msgid "Restoring in %.6g s. " msgstr "" msgid "Acquisition. " msgstr "" #, c-format msgid "Acquisition with the period %s. " msgstr "" #, c-format msgid "Next acquisition by the cron '%s'. " msgstr "" #, c-format msgid "Spent time %s[%s], read %s, wrote %s, connection errors %g. " msgstr "" #, c-format msgid "Connection to the data source: %s." msgstr "" msgid "STOP" msgstr "" msgid "-1:No data" msgstr "" msgid "No one driver or board are present." msgstr "" msgid "Error opening the remote PLC socket." msgstr "" #, c-format msgid "Closing the socket %d error '%s (%d)'!" msgstr "" msgid "Error connecting to the PLC." msgstr "" #, c-format msgid "The connection type '%d' is not supported." msgstr "" msgid "The connector works only with Data Blocks." msgstr "" msgid "Requested block is too big." msgstr "" #, c-format msgid "The board %d is not present." msgstr "" msgid "Timeout sending request." msgstr "" #, c-format msgid "Error requesting to DB: %d." msgstr "" msgid "ReadDB" msgstr "" msgid "Timeout the get request." msgstr "" msgid "There is no response from the remote station." msgstr "" msgid "Master is out of the logical token ring." msgstr "" msgid "Error the specified offset address or DB." msgstr "" #, c-format msgid "Error reading the block %d: %s." msgstr "" #, c-format msgid "Error the DB %d: %s." msgstr "" msgid "Error the server response." msgstr "" msgid "Not full response." msgstr "" #, c-format msgid "Error the server response: %d." msgstr "" #, c-format msgid "Size of the response data block %d != %d." msgstr "" msgid "Transmitted block is too big." msgstr "" msgid "Timeout getting request." msgstr "" msgid "WriteDB" msgstr "" #, c-format msgid "Error writing the block %d: %s." msgstr "" #, c-format msgid "Unknown target protocol '%s'." msgstr "" #, c-format msgid "Unknown service '%s'." msgstr "" msgid "Inconsistency in response size." msgstr "" msgid "Short." msgstr "" #, c-format msgid "Error the PDU type, %d != %d." msgstr "" msgid "Inappropriate size." msgstr "" msgid "PDU header" msgstr "" msgid "Not started from 0x32." msgstr "" #, c-format msgid "Inconsistency of the response ID to his request one, %d != %d." msgstr "" #, c-format msgid "PLC error: [%d] %s" msgstr "" msgid "Size of the parameters + data more to the response size." msgstr "" #, c-format msgid "Parameters part size does not match for expected value, %d." msgstr "" msgid "Inconsistency of the response function." msgstr "" #, c-format msgid "An attempt to access outside the DB '%s' (200 family), %s(%s)." msgstr "" #, c-format msgid "An attempt to access outside the DB '%s', %s(%s)." msgstr "" #, c-format msgid "The DB '%s' doesn't exist." msgstr "" #, c-format msgid "Unknown error accessing to DB, %xh." msgstr "" #, c-format msgid "Unknown data encoding type, %d." msgstr "" #, c-format msgid "Inconsistency in the size of the data block to the response size, %d(%d)." msgstr "" #, c-format msgid "%d:The value is not gathered." msgstr "" #, c-format msgid "Error value type '%s'." msgstr "" msgid "OK" msgstr "" msgid "IN REDUNDANCY" msgstr "" msgid "" "Manual restart of the enabled controller object causes the force reformation of the acquisition blocks.\n" "Restart to apply the removed PLC links in run." msgstr "" msgid "" "Connection type, supported ones:\n" " CIF_PB - connection to S7 controllers of the firm Siemens via CIF-50PB communication processor or similar;\n" " ISO_TCP, ISO_TCP243 - connection to S7 controllers of the firm Siemens via the Ethernet network (TCP243 by CP243);\n" " ADS - TwinCAT ADS/AMS protocol for connecting to controllers of the firm Beckhoff." msgstr "" msgid "" "Remote controller address, for the connections:\n" " CIF_PB - controller address in the ProfiBus network, one digit 0-255;\n" " ISO_TCP, ISO_TCP243 - IP-address in the Ethernet network;\n" " ADS - network identifier and port for the target and source stations, in view\n" " \"{Target_AMSNetId}:{Target_AMSPort}|{Source_AMSNetId}:{Source_AMSPort}\"\n" " (for example: \"192.168.0.1.1.1:801|82.207.88.73.1.1:801\"), where:\n" " AMSNetId - network identifier, writes in view of six digits 0-255, for example: \"192.168.0.1.1.1\";\n" " AMSPort - port, writes in view of one digit 0-65535." msgstr "" msgid "OpenSCADA output transport for the protocol ADS (port 48898, 801 for AMS) and ISO_TCP (port 102) for sending requests." msgstr "" msgid "Error of the calculation template." msgstr "" msgid "1:Parameter disabled." msgstr "" msgid "2:Acquisition stopped." msgstr "" msgid "10:Error of connection or no response." msgstr "" msgid "" "Attributes configuration list. List must be written by lines in the form \"(DB{N}|F).{off}.{tp}{SzBit}:{flg}:{id}[:{name}]\".\n" "Where:\n" " DB{N} - Data Block number in decimal, can be negative one for the specific data areas of the ISO_TCP connection types;\n" " F - the Flags/Markers specific data area (131) of the ISO_TCP connection types;\n" " Start from the symbol '#' for the commented line;\n" " off - offset in the Data Block;\n" " tp - type in one symbol from the list: b-Boolean, i-Signed integer, u-Unsigned integer, r-Real, s-String;\n" " SzBit - type size for non Boolean or bit of byte for it: b=[0...7], iu=[1,2(def),4,8], r=[4(def).8], s=[0(def10)...100];\n" " flg - flags: read/write mode (r-read, w-write);\n" " id - identifier of the created attribute;\n" " name - name of the created attribute.\n" "Examples:\n" " \"DB1.12.b2:r:var:Variable\" - Boolean in DB 1, offset 12 and bit 2;\n" " \"DB2.24.u:rw:var:Variable\", \"DB2.0x18.r8:w:var\" - Integer or Real in DB 2, offset 24, size default and 8;\n" " \"DB4.0x30.s20:r:var:Variable\" - String in DB 4, offset 48 and size 20;\n" " \"F.12.b5:r:var:Variable\" - Boolean in the Flags/Markers data area, offset 12 and bit 5." msgstr "" msgid "" "Special address format:\n" "Siemens-DB address writes in the form \"(DB{N}|F).{off}[.[{tp}]{SzBit}]\", where:\n" " DB{N} - Data Block number in decimal, can be negative one for the specific data areas of the ISO_TCP connection types;\n" " F - the Flags/Markers specific data area (131) of the ISO_TCP connection types;\n" " off - offset in the Data Block;\n" " tp - type in one symbol from the list: b-Boolean, i-Signed integer, u-Unsigned integer, r-Real, s-String;\n" " SzBit - type size for non Boolean or bit of byte for it: b=[0...7], iu=[1,2(def),4,8], r=[4(def).8], s=[0(def10)...100].\n" "Examples:\n" " \"DB1.12.2\", \"DB1.0xC.2\", \"DB1.12.b2\" - Boolean in DB 1, offset 12 and bit 2;\n" " \"DB2.24\", \"DB2.0x18.8\" - Integer or Real, taken from the template's IO type, in DB 2, offset 24, size default and 8;\n" " \"DB3.36.i4\", \"DB3.0x24.r8\" - directly specified Integer and Real in DB 3, offset 36, size 4 and 8;\n" " \"DB4.48.20\", \"DB4.0x30.s20\" - implicitly, from the template IO type, and directly specified String in DB 4, offset 48 and size 20;\n" " \"F.12.5\" - Boolean in the Flags/Markers data area, offset 12 and bit 5.\n" " Link's template, of the column \"Value\" on the template forming side, writes in the form \"{LnkName}|{OffDB}[.{bit}][|[{tp}]{sz}]\", where:\n" " LnkName - name of the group link; all references with the same name are grouped and\n" " indicated as one reference to the data block or data block with the specified offset;\n" " OffDB - offset number in the data block; if you specify only the data block, when configuring the template, this offset will be specified for the parameter;\n" " if the configuration of the template also specifies an offset, both offsets will be summed together;\n" " the data block number and the offset can be specified both in the decimal (3245) and hexadecimal format (0xCAD);\n" " bit - bit number for Boolean, [0...7];\n" " tp - type in one symbol from the list: i-Signed integer, u-Unsigned integer, r-Real, s-String;\n" " sz - type size: iu=[1,2(def),4,8], r=[4(def).8], s=[0(def10)...100].\n" " Examples:\n" " \"Grp 1|0.0\" - Boolean in \"Grp 1\", offset 0 and bit 0;\n" " \"Grp 2|10|1\", \"Grp 2|0xA|i1\" - Integer, from the template IO type and directly, in \"Grp 2\", offset 10 and size 1;\n" " \"Grp 3|20|20\", \"Grp 3|0x13|s20\" - String, from the template IO type and directly, in \"Grp 3\", offset 20 and size 20.\n" "\n" "Common address format:\n" msgstr ""