/*******************************************************************/ /* i-8080 driver head file */ /* */ /* Note: head file version is different to lib file version. */ /* file name: 8080.h (mapping 93c46202.c) */ /*******************************************************************/ /* Ver 2.0.3 [2005,Oct,17] by Kevin ==== English comment ================================== Modify comments: 1. i8080_InitDriver 2. i8080_RecoverDefaultSetting ==== Traditional Chinese comments ===================== 修改說明 1. i8080_InitDriver 2. i8080_RecoverDefaultSetting --------------------------------------------------------------------- Ver 2.0.1 [2005,Jan,27] by Kevin ==== English comment ================================== Modify comments of i8080_ClrCnt ==== Traditional Chinese comments ===================== 修改 i8080_ClrCnt 的說明 --------------------------------------------------------------------- Ver 2.0.0 [2004,Dec,20] by Kevin ==== English comment ================================== This version is quite different to version 1.0.0 Rename: i8080_GetVersion ===> i8080_GetLibVersion i8080_ReadDIXor ===> i8080_ReadDI_Xor i8080_ReadDIXorLp ===> i8080_ReadDI_XorLPF i8080_ReadLowPassUs ===> i8080_ReadLowPassFilter_Us i8080_SetLowPassUs ===> i8080_SetLowPassFilter_Us Remove: i8080_ReadFreqConfiguration i8080_SetFreqConfiguration i8080_ReadCntAndT Change functionarity: i8080_InitDriver ===> Reads initial configurations from EEPROM. The configurations includes: 1. XOR register 2. Channel mode 3. Low Pass Filter pulse width 4. Low Pass Filter status (enable/disable) 5. Freq mode 6. Freq update time i8080_ReadChannelMode ===> meaning of Mode is changed i8080_SetChannelMode ===> meaning of Mode is changed Rename and change functionarity: i8080_ReadFreqConfiguration ===> i8080_ReadFreqUpdateTime i8080_SetFreqConfiguration ===> i8080_SetFreqUpdateTime Add: i8080_RecoverDefaultSetting i8080_ReadFreqMode i8080_SetFreqMode i8080_ReadCntPulseDir: Pulse/Dir mode uses function i8080_ReadCntUpDown Originally. Now, Pulse/Dir mode uses i8080_ReadCntPuleseDir Up/Down mode uses i8080_ReadCntUpDown. i8080_ReadLowPassFilter_Status i8080_SetLowPassFilter_Status ==== Traditional Chinese comments ===================== 這個版本和 1.0.0 版差異很多 更改名稱: i8080_GetVersion ===> GetLibVersion i8080_ReadDIXor ===> i8080_ReadDI_Xor i8080_ReadDIXorLp ===> i8080_ReadDI_XorLPF i8080_ReadLowPassUs ===> i8080_ReadLowPassFilter_Us i8080_SetLowPassUs ===> i8080_SetLowPassFilter_Us 移除: i8080_ReadCntAndT 改變功能: i8080_InitDriver ===> 由 EEPROM 將初始組態設定讀出。 這些組態設定包括了: 1. XOR register 2. 每個通道的模式 3. 低通濾波器的寬度 4. 低通濾波器的狀態 (啟動/關閉) 5. 頻率的模式 6. 頻率值的更新時間 i8080_ReadChannelMode ===> 改變 Mode 的意義 i8080_SetChannelMode ===> 改變 Mode 的意義 更改名稱，並且改變功能: i8080_ReadFreqConfiguration ===> i8080_ReadFreqUpdateTime i8080_SetFreqConfiguration ===> i8080_SetFreqUpdateTime 增加: i8080_RecoverDefaultSetting i8080_ReadFreqMode i8080_SetFreqMode i8080_ReadCntPulseDir: Pulse/Dir 模式原本使用 i8080_ReadCntUpDown。 現在 Pulse/Dir 模式使用 i8080_ReadCntPuleseDir Up/Down 模式使用 i8080_ReadCntUpDown. i8080_ReadLowPassFilter_Status i8080_SetLowPassFilter_Status */ //for LinPAC-270 slot0~slot8 static int SlotAddr[9] ={0x1,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8}; extern unsigned char i8080_ChannelMode[9][8]; // slot*9, channel*8 // 0: Dir/Pulse Counter // 1: Up/Down Counter // 2: Frequency // 3: Up Counter int i8080_GetLibVersion(void); //Get the version number of i8080 library (Hex) Rev:1.0.00 void i8080_GetLibDate(unsigned char *LibDate); // Get the date of 8080 library ,Sep 03 2003 int i8080_InitDriver(int Slot); /* Configure the 8080 with the setting stored in the EEPROM. If there is no settings stored in the EEPROM, the function will call i8080_RecoverDefaultSetting. Slot: 0~8 return: 0 --> OK -1 --> Module not found >0 --> Some Pulse/Dir counters have one count offset (+1) Bit0=1 ==> A0 has one count offset (+1) Bit2=1 ==> A1 has one count offset (+1) Bit4=1 ==> A2 has one count offset (+1) Bit6=1 ==> A3 has one count offset (+1) (due to the input channel is high) */ int i8080_AutoScan(void); /* Auto sacn the i8080 to updates 8 channels. This function is used to update the hardware counter values. The hardware counter is 16-bit. User's code must call the function or i8080_ReadCntPulseDir, i8080_ReadCntUpDown, i8080_ReadFreq, i8080_ReadCntUp before the hardware counter is overflow. Under very high speed signal input, for example: 450K Hz, the 16-bit counter is overflow round 145 ms. To avoid the overflow situation, user's code is recommended to call i8080_AutoScan every 70 ms. */ int i8080_ReadCntPulseDir(int Slot, int Channel,long *Cnt32U,int *Overflow); /* Read Pulse/Dir Counter Slot: 0~8 Channel: 0~7 Cnt32L = 32-bit UpDown Counter = Bit31=0 --> Up Count (count >0) = Bit31=1 --> Down Count (count <0) Overflow=number of overflow Total count = over * 0x80000000 + count ExampleA: over=1 , count=16384, total count = (1)*0x80000000 +16384 = 2147500032 ExampleB: over=-1 , count=-8192, total count = (-1)*0x80000000 -8192 = -2147491840 */ int i8080_ReadCntUpDown(int Slot, int Channel,long *Cnt32U,int *Overflow); /* Read UpDown Counter Slot: 0~8 Channel: 0~7 Cnt32L = 32-bit UpDown Counter = Bit31=0 --> Up Count (count >0) = Bit31=1 --> Down Count (count <0) Overflow=number of overflow Total count = over * 0x80000000 + count ExampleA: over=1 , count=16384, total count = (1)*0x80000000 +16384 = 2147500032 ExampleB: over=-1 , count=-8192, total count = (-1)*0x80000000 -8192 = -2147491840 */ int i8080_ReadFreq(int Slot, int Channel, unsigned long *Freq); /* Slot: 0~8 Channel: 0~7 Freq: unit=Hz */ int i8080_ReadCntUp(int Slot, int Channel, unsigned long *Cnt32U, unsigned int *OverFlow); /* Read Up Counter Slot: 0~8 Channel: 0~7 --> 0=A0, 1=B0, ...,6=A3,7=B3 Cnt32U = 32-bit Up Counter Overflow=number of Overflow Total count = over * 0x100000000 + count ExampleA: over=1 , count=16384, total count = (1)*0x100000000 +16384 = 4294983680 */ int i8080_ClrCnt(int Slot, int Channel); /* Clear Counter Slot: 0~8 Channel: 0~7 return: 0 ==> No error 1 ==> The Pulse/Dir counter has one count offset (+1). It is due to the pulse channel is high. The correct initial situation is: pulse channel is low or open dir signal is high or low. */ //=================================================================== //==== Functions to configure 8080 ================================== //=================================================================== void i8080_RecoverDefaultSetting(int Slot); /* Slot = 0~8 Default settings: XOR register=0 Channel mode= 3 (Up counter mode) Frequency operate mode = 0 (Auto mode) Frequency update time: Auto mode =330 ms Low freq mode = 1000 ms High freq mode = 100 ms Low Pass Filter status = disable Low Pass Filter signal width = 1 ms */ int i8080_ReadXorRegister(int Slot, int Channel, int *XorReg); /* Slot: 0~8 Channel: 0~7 *XorReg: 0 ==> Low active (signal from High to Low, count changed) 1 ==> High acitve (signal from Low to High, count changed) return 0 --> OK return others --> error codes */ int i8080_SetXorRegister(int Slot, int Channel, int XorReg); /* Slot: 0~8 Channel: 0~7 XorReg: 0 ==> Low active (signal from High to Low, count changed) 1 ==> High acitve (signal from Low to High, count changed) return: 0 ==> No error 1 ==> The Pulse/Dir counter has one count offset (+1) (due to the input channel is high) */ int i8080_ReadChannelMode(int Slot, int Channel, int *Mode); /* Slot: 0~8 Channel: 0~7 Mode: 0 --> Dir/Pulse Counter 1 --> Up/Down Counter 2 --> Frequency 3 --> Up Counter */ int i8080_SetChannelMode(int Slot, int Channel, int Mode); /* Slot: 0~8 Channel: 0~7 Mode: 0 --> Dir/Pulse Counter 1 --> Up/Down Counter 2 --> Frequency 3 --> Up Counter return: 0 ==> No error 1 ==> The Pulse/Dir counter has one count offset (+1) (due to the input channel is high) */ int i8080_ReadLowPassFilter_Us(int Slot, int Channel, unsigned int *Us); /* Read Low Pass Filter Slot: 0~8 Channel: 0~7 Us: 1~32767, pulse width, unit=0.001 ms */ int i8080_SetLowPassFilter_Us(int Slot, int Channel, unsigned int Us); /* Set Low Pass Filter Slot: 0~8 Channel: 0~7 Us: 1~32767, pulse width, unit=micro second */ void i8080_ReadLowPassFilter_Status(int Slot,int Channel,int *Status); /* Slot: 0~7 Channel:0~7 Status: 0=disable 1=enable */ void i8080_SetLowPassFilter_Status(int Slot,int Channel,int Status); /* Slot: 0~8 Channel:0~7 Status: 0=disable 1=enable */ void i8080_ReadFreqMode(int Slot, int Channel, int *Mode); /* Slot: 0~8 Channel: 0~7 *Mode: 0=Auto 1=Low Frequency 2=High Frequency */ void i8080_SetFreqMode(int Slot, int Channel, int Mode); /* Slot: 0~8 Channel: 0~7 Mode: 0=Auto 1=Low Frequency 2=High Frequency */ void i8080_ReadFreqUpdateTime(int Slot, int *AutoMode_UpdateTime , int *LowMode_UpdateTime, int *HighMode_UpdateTime); /* Reads the update time used by frequency measurement algorithm Slot: 0~8 AutoMode_UpdateTime = time period for Auto mode, unit: ms LowMode_UpdateTime = time period for Low Frequency mode, unit: ms LowMode_UpdateTime = time period for High Frequency mode, unit: ms */ int i8080_SetFreqUpdateTime(int Slot, int AutoMode_UpdateTime, int LowMode_UpdateTime, int HighMode_UpdateTime); /* Sets the update time used by frequency measurement algorithm Slot: 0~8 AutoMode_UpdateTime = time period for Auto mode, unit: ms LowMode_UpdateTime = time period for Low Frequency mode, unit: ms LowMode_UpdateTime = time period for High Frequency mode, unit: ms */ //=================================================================== //===== Other Functions ============================================= //=================================================================== int i8080_ReadDI_Xor(int Slot, int *DI); /* Slot: 0~8 *DI: Bit0 = DI of A0 after XorControl *DI: Bit1 = DI of B0 after XorControl ... *DI: Bit7 = DI of B3 after XorControl return = 0 --> OK <> 0 --> error codes */ int i8080_ReadDI_XorLPF(int Slot, int *DI); /* Slot: 0~8 *DI: Bit0 = DI of A0 after XorControl & Low Pass Filter *DI: Bit1 = DI of B0 after XorControl & Low Pass Filter ... *DI: Bit7 = DI of B3 after XorControl & Low Pass Filter return = 0 --> OK <> 0 --> error codes */ //=================================================================== //============ Functions to read/write EEPROM ======================= //=================================================================== int i8080_EepWriteEnable(int Slot); /* Write_Enable EEPROM Slot: 0~8 return 0 --> OK return others --> error codes */ int i8080_EepWriteDisable(int Slot); /* Write_Disable EEPROM Slot: 0~8 return 0 --> OK return others --> error codes */ int i8080_EepWriteWord(int Slot, int Addr, int Value); /* write 16-bit data to EEP Slot = 0 ~ 8 = Slot Number Addr: 0~39 for users 40~63 for 8080 configuration Value = two bytes integer return 0 --> OK -1 --> Address error */ int i8080_EepReadWord(int Slot, int Addr, int *Value); /* read 16-bit data from EEP Slot: 0~8 Addr: 0~39 for users 40~63 for 8080 configuration Value: two bytes integer return 0 --> OK -1 --> Address error */