/* * linpac.h * (C) 2004 Moki Matsushima * * All this is intended to be used with a ISA-like slot on the SA1100's * static memory bus. * This is included by slot.c. */ //for 8k/5k/2k by cindy 20080910 extern void SetLED(unsigned int bFlag); extern int GetBackPlaneID(); //getport 9 0 extern int GetSlotCount(); //getport 9 35 extern int GetDIPswitch(); //getport 9 1 extern int GetRotaryID(int slot); extern int GetATOMRotaryID(void); extern int SetATOMLED(unsigned int led, unsigned int flag); extern float GetSDKversion(void); extern unsigned char inb(unsigned int slot,unsigned int offset); extern void outb(unsigned int slot,unsigned int offset, unsigned char data); extern int setSignal(int slot,int signal,pid_t pid); extern int GetModuleType(int slot); extern void ChangeToSlot(int slot); extern void Read_SN(unsigned char serial_num[8]); extern int GetNameOfModule(int slot); extern unsigned int getSystemStatus(void); extern unsigned char Read_SRAM(int offset); extern void Write_SRAM(int offset, unsigned char data); extern void EnableWDT(unsigned int msecond); extern void DisableWDT(void); extern void EnableSysWDT(unsigned int); extern void DisableSysWDT(void); extern unsigned int WatchDogSWEven(void); extern void ClearWDTSWEven(unsigned int rcsr); extern void EnableTimer(unsigned int usecond); extern void DisableTimer(void); extern unsigned char Read_EEP(int block, int offset); extern void Write_EEP(int block, int offset, unsigned char data); extern void Enable_EEP(void); extern void Disable_EEP(void); extern int Open_SlotAll(void); extern void Close_SlotAll(void); //extern __bool_t Close_SlotAll(void); extern int Open_Slot(int slot); //extern __bool_t Close_Slot(int slot); extern void Close_Slot(int slot); extern void DO_8(int slot, unsigned char data); extern void DO_16(int slot, unsigned int data); extern void DO_32(int slot, unsigned long data); extern void DIO_DO_8(int slot, unsigned char data); extern void DIO_DO_16(int slot, unsigned int data); extern unsigned char DI_8(int slot); extern unsigned char DI_I8064(int slot); extern unsigned int DI_16(int slot); extern unsigned long DI_32(int slot); extern unsigned char DIO_DI_8(int slot); extern unsigned int DIO_DI_16(int slot); extern unsigned char DO_8_RB(int slot); extern unsigned int DO_16_RB(int slot); extern unsigned long DO_32_RB(int slot); extern unsigned char DIO_DO_8_RB(int slot); extern unsigned int DIO_DO_16_RB(int slot); extern void DO_8_BW(int slot, int bit, int data); extern void DO_16_BW(int slot, int bit, int data); extern void DO_32_BW(int slot, int bit, int data); extern void DIO_DO_8_BW(int slot, int bit, int data); extern void DIO_DO_16_BW(int slot, int bit, int data); extern int DI_8_BW(int slot, int bit); extern int DI_16_BW(int slot, int bit); extern int DI_32_BW(int slot, int bit); extern float HEX_TO_FLOAT_Cal(int HexValue,int slot,int gain); extern float CalHex_TO_FLOAT(int HexValue,int gain); extern void ARRAY_HEX_TO_FLOAT_cal(int *HexValue,float *FloatValue,int slot,int gain,int len); extern void ARRAY_CalHex_TO_FLOAT(int *HexValue,float *FloatValue,int gain,int len); extern void I8017_EE_WriteDisable(int slot,int offset); extern unsigned I8017_EE_Read(int slot,int Addr); extern unsigned I8017_EE_Write(int slot,int Addr,unsigned Data); extern unsigned I8017_EE_Erease(int slot,int offset,int Addr); extern void I8017_EE_WriteEnable(int slot); extern void I8017_SetLed(int slot,unsigned led); extern int I8017_Init(int slot); extern void I8017_SetChannelGainMode(int slot,int ch,int gain,int mode); extern int I8017_GetCurAdChannel_Hex(int slot); extern int I8017HW_GetCurAdChannel_Hex(int slot); extern int I8017_Hex_Cal(int data); extern int I8017_Hex_Cal_Slot_Gain(int slot,int gain,int data); extern int I8017_GetCurAdChannel_Hex_Cal(int slot); extern float I8017_GetCurAdChannel_Float_Cal(int slot); extern int I8017_AD_POLLING(int slot,int ch,int gain,unsigned int datacount,int *DataPtr); extern int I8017HW_AD_POLLING(int slot,int ch,int gain,unsigned int datacount,int *DataPtr); extern int I8017_AD_POLLING_Cal(int slot,int ch,int gain,unsigned int datacount,int *DataPtr); extern void I8024_EE_WriteDisable(int slot,int offset); extern unsigned I8024_EE_Read(int slot,int Addr); extern unsigned I8024_EE_Write(int slot,int Addr,unsigned Data); extern unsigned I8024_EE_Erease(int slot,int offset,int Addr); extern void I8024_EE_WriteEnable(int slot); extern void I8024_CurrentOut(int slot,int ch,float cdata); extern void I8024_VoltageOut(int slot,int ch,float cdata); extern void I8024_CurrentHexOut(int slot,int ch,int hdata); extern void I8024_VoltageHexOut(int slot,int ch,int hdata); extern void I8024_Initial(int slot); extern unsigned char I8090_REGISTRATION(unsigned char slot, unsigned int address); extern void I8090_INIT_CARD(unsigned char cardNo,unsigned char x_mode,unsigned char y_mode,unsigned char z_mode); extern unsigned int I8090_GET_ENCODER(unsigned char cardNo, unsigned char axis); extern void I8090_RESET_ENCODER(unsigned char cardNo, unsigned char axis); extern unsigned char I8090_GET_INDEX(unsigned char cardNo); extern void I8090_ENCODER32_ISR(unsigned char cardNo); extern void I8090_RESET_ENCODER32(unsigned char cardNo, unsigned char axis); extern long I8090_GET_ENCODER32(unsigned char cardNo, unsigned char axis); extern void I8091_reset_fifo(unsigned char cardNo); extern unsigned char I8091_REGISTRATION(unsigned char cardNo,unsigned int address); extern unsigned char I8091_LIMIT_X(unsigned char cardNo); extern unsigned char I8091_LIMIT_Y(unsigned char cardNo); extern void I8091_WAIT_X(unsigned char cardNo); extern unsigned char I8091_IS_X_STOP(unsigned char cardNo); extern void I8091_WAIT_Y(unsigned char cardNo); extern unsigned char I8091_IS_Y_STOP(unsigned char cardNo); extern void I8091_SET_VAR(unsigned char cardNo,unsigned char set_DDA_cycle,unsigned char set_Acc_Dec,unsigned int set_Low_Speed,unsigned int set_High_Speed); extern void I8091_SET_DEFDIR(unsigned char cardNo,unsigned char defdirX,unsigned char defdirY); extern void I8091_SET_MODE(unsigned char cardNo,unsigned char modeX,unsigned char modeY); extern void I8091_SET_SERVO_ON(unsigned char cardNo,unsigned char sonX,unsigned char sonY); extern void I8091_SET_NC(unsigned char cardNo, unsigned char sw); extern void I8091_STOP_X(unsigned char cardNo); extern void I8091_STOP_Y(unsigned char cardNo); extern void I8091_RESET_SYSTEM(unsigned char cardNo); extern void I8091_STOP_ALL(unsigned char cardNo); extern void I8091_EMG_STOP(unsigned char cardNo); extern void I8091_LSP_ORG(unsigned char cardNo,unsigned char DIR,unsigned char AXIS); extern void I8091_HSP_ORG(unsigned char cardNo,unsigned char DIR,unsigned char AXIS); extern void I8091_HSD_ORG(unsigned char cardNo,unsigned char DIR,unsigned char AXIS); extern void I8091_LSP_PULSE_MOVE(unsigned char cardNo,unsigned char AXIS,long pulseN); extern void I8091_HSP_PULSE_MOVE(unsigned char cardNo,unsigned char AXIS,long pulseN,unsigned int speed); extern void I8091_LSP_MOVE(unsigned char cardNo,unsigned char DIR,unsigned char AXIS); extern void I8091_HSP_MOVE(unsigned char cardNo,unsigned char DIR,unsigned char AXIS); extern void I8091_CSP_MOVE(unsigned char cardNo,unsigned char DIR,unsigned char AXIS,unsigned int move_speed); extern void I8091_SLOW_DOWN(unsigned char cardNo,unsigned char AXIS); extern void I8091_SLOW_STOP(unsigned char cardNo,unsigned char AXIS); extern void I8091_INTP_PULSE(unsigned char cardNo,int Xpulse, int Ypulse); extern void I8091_INTP_LINE(unsigned char cardNo,long Xpulse, long Ypulse); extern void I8091_INTP_PROFILE(unsigned char cardNo); extern void I8091_INTP_PROFILE_CSPD(unsigned int spd); extern unsigned char I8091_LINE_CORE(unsigned char cardNo,long x,long y,unsigned int speed,unsigned char acc_mode); extern unsigned char I8091_CIRCLE_CORE(unsigned char cardNo,long x,long y,unsigned char dir,unsigned int speed,unsigned char acc_mode); extern unsigned char I8091_ARC_CORE(unsigned char cardNo,long x,long y,long R, unsigned char dir, unsigned int speed, unsigned char acc_mode); extern void intp_state_machine(); extern void I8091_INTP_LINE02(unsigned char cardNo,long x,long y,unsigned int speed,unsigned char acc_mode); extern void I8091_INTP_CIRCLE02(unsigned char cardNo,long x,long y,unsigned char dir,unsigned int speed, unsigned char acc_mode); extern void I8091_INTP_ARC02(unsigned char cardNo,long x,long y,long R,unsigned char dir,unsigned int speed,unsigned char acc_mode); extern unsigned char I8091_INTP_STOP(); extern void I8091_GET_CARD(unsigned char cardNo); extern long GetTimeTicks_ms(void); #define IoRead inb #define IoWrite outb #define SLOT0 0 #define SLOT1 1 #define SLOT2 2 #define SLOT3 3 #define SLOT4 4 #define SLOT5 5 #define SLOT6 6 #define SLOT7 7 #define SLOT8 8 #define SLOT9 9 #define SLOT10 10