Source: openscada
Section: graphics
Priority: optional
Standards-Version: 3.9.6
Maintainer: Roman Savochenko <roman@oscada.org>
Homepage: http://oscada.org
Build-Depends: debhelper (>= 5), dh-autoreconf, sqlite3, g++, autotools-dev, pkg-config, gettext, libgd-dev | libgd2-xpm-dev | libgd2-noxpm-dev, libpcre3-dev,
 libmysqlclient-dev | libmariadb-dev, libsqlite3-dev, firebird-dev, libpq-dev, libldap2-dev,
 libsensors-dev | libsensors4-dev, portaudio19-dev, bison, libsnmp-dev, libcomedi-dev,
 libssl-dev, libfftw3-dev,
 libqt4-dev | qtbase5-dev | qt6-base-dev, libqtwebkit-dev | libqt5webkit5-dev | qtwebengine5-dev | qt6-webengine-dev, libphonon-dev | libphonon4qt5-dev | qtmultimedia5-dev | qt6-multimedia-dev

Package: openscada
Architecture: all
Depends: openscada-db-mysql,
 openscada-daq-blockcalc, openscada-daq-daqgate, openscada-daq-dcon, openscada-daq-modbus,
 openscada-daq-opcua, openscada-daq-snmp, openscada-daq-siemens, openscada-daq-soundcard, openscada-daq-system,
 openscada-arh-dbarch, openscada-arh-fsarch,
 openscada-tr-ssl, openscada-prot-http,
 openscada-ui-qtstarter, openscada-ui-qtcfg, openscada-ui-vcaengine, openscada-ui-vision, openscada-ui-webvision, openscada-ui-webcfgd, openscada-ui-webuser,
 openscada-spec-flibmath
Description: Open SCADA system metapackage
 Typical OpenSCADA installation.

Package: openscada-core
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends}
Description: Open SCADA system core
 Includes the most used modules into the core: DB.DBF, DB.SQLite, DB.DBGate,
 DAQ.JavaLikeCalc, DAQ.LogicLev,
 Transport.Sockets, Transport.Serial,
 Protocol.SelfSystem, Protocol.UserProtocol,
 Special.FLibComplex1, Special.FLibSYS.

Package: openscada-dbg
Section: debug
Priority: extra
Architecture: any
Depends: openscada-core (= ${binary:Version}), ${misc:Depends}
Description: Debug symbols for OpenSCADA
 Debug symbols to provide extra debug info in case of crash.

Package: openscada-doc-en
Section: doc
Architecture: all
Description: OpenSCADA documents (EN)
 The openscada-doc-en package include documents files (English).

Package: openscada-doc-ru
Section: doc
Architecture: all
Depends: openscada-doc-en
Description: OpenSCADA documents (RU)
 The openscada-doc-ru package include documents files (mRussian).

Package: openscada-doc-uk
Section: doc
Architecture: all
Depends: openscada-doc-en
Description: OpenSCADA documents (UK)
 The openscada-doc-uk package include documents files (Ukraine).

Package: openscada-dev
Section: devel
Architecture: any
Depends: openscada-core (= ${binary:Version})
Description: OpenSCADA development
 The openscada-dev package includes library archives and include files.

Package: openscada-libdb-main
Architecture: all
Depends: openscada-core
Description: Main OpenSCADA libraries for DAQ and other into SQLite DB
 The openscada-libdb-main package includes main OpenSCADA libraries
 into SQLite DB. For use connect SQLite DB file LibsDB/OscadaLibs.db.

Package: openscada-libdb-vca
Architecture: all
Depends: openscada-core, openscada-ui-vcaengine
Description: Visual components libraries into SQLite DB
 The openscada-libdb-vca package includes visual components libraries into SQLite DB.
 For use connect SQLite DB file LibsDB/vcaBase.db and LibsDB/vcaTest.db.

Package: openscada-model-aglks
Architecture: all
Depends: openscada-core, openscada-libdb-main, openscada-libdb-vca,
 openscada-tr-ssl, openscada-prot-http,
 openscada-daq-blockcalc, openscada-daq-modbus, openscada-daq-system, openscada-daq-daqgate, openscada-daq-opcua,
 openscada-arh-fsarch,
 openscada-ui-qtstarter, openscada-ui-qtcfg, openscada-ui-vision, openscada-ui-webvision, openscada-ui-webcfgd,
 openscada-spec-flibmath
Description: Model "AGLKS" data bases and config (Demo: EN,UK,RU)
 The openscada-model-aglks package includes model "AGLKS" data bases and config.
 The Model is used for OpenSCADA demo and allowed for English, Ukrainian and
 mRussian languages. For start use command <openscada_AGLKS>.

Package: openscada-model-boiler
Architecture: all
Depends: openscada-core, openscada-libdb-main, openscada-libdb-vca,
 openscada-daq-blockcalc, openscada-daq-modbus, openscada-daq-system, openscada-arh-fsarch,
 openscada-ui-qtstarter, openscada-ui-qtcfg, openscada-ui-vision, openscada-ui-webvision, openscada-ui-webcfgd,
 openscada-spec-flibmath
Description: Model "Boiler" data bases and config (EN,UK,RU)
 The openscada-model-boiler package model "Boiler" data bases and config.
 The Model is allowed for English, Ukrainian and mRussian languages.
 For start use command <openscada_Boiler>.

Package: openscada-plc
Architecture: all
Depends: openscada-core, openscada-daq-blockcalc, openscada-daq-modbus, openscada-daq-system, openscada-daq-dcon, openscada-arh-fsarch,
 openscada-tr-ssl, openscada-prot-http,
 openscada-ui-vcaengine, openscada-ui-webcfgd, openscada-ui-webvision,
 openscada-spec-flibmath
Description: OpenSCADA - PLC virtual package
 The openscada-plc is virtual package for PLC.

Package: openscada-server
Architecture: all
Depends: openscada-core, openscada-db-mysql, openscada-db-firebird, openscada-db-postgresql,
 openscada-daq-system, openscada-daq-blockcalc, openscada-daq-snmp, openscada-daq-siemens,
 openscada-daq-modbus, openscada-daq-dcon, openscada-daq-daqgate, openscada-daq-soundcard,
 openscada-arh-fsarch, openscada-arh-dbarch,
 openscada-tr-ssl, openscada-prot-http,
 openscada-ui-vcaengine, openscada-ui-webcfg, openscada-ui-webcfgd, openscada-ui-webvision,
 openscada-spec-flibmath
Description: OpenSCADA - server virtual package
 The openscada-server is virtual package for SCADA-server.

Package: openscada-vis-station
Architecture: all
Depends: openscada-core, openscada-db-mysql,
 openscada-daq-system, openscada-daq-blockcalc, openscada-daq-snmp, openscada-daq-siemens,
 openscada-daq-modbus, openscada-daq-dcon, openscada-daq-daqgate, openscada-daq-soundcard,
 openscada-arh-fsarch, openscada-arh-dbarch,
 openscada-tr-ssl,
 openscada-ui-vcaengine, openscada-ui-vision, openscada-ui-qtstarter, openscada-ui-qtcfg,
 openscada-spec-flibmath
Description: OpenSCADA - visual station virtual package
 The openscada-vis-station is virtual package for visual station (SCADA).

#===== DB subsystem modules ======
#Package: openscada-db-dbf
#Architecture: any
#Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
#Description: DB DBF support
# The openscada-db-dbf package - provides support of the *.dbf files, version 3.0.

#Package: openscada-db-sqlite
#Architecture: any
#Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
#Description: DB SQLite support
# The openscada-db-sqlite package - provides support of the BD SQLite.

Package: openscada-db-mysql
Architecture: any
Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
Description: DB MySQL support
 The openscada-db-mysql package - provides support of the BD MySQL.

Package: openscada-db-firebird
Architecture: any
Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
Description: DB FireBird support
 The openscada-db-firebird package - provides support of the DB FireBird.

Package: openscada-db-postgresql
Architecture: any
Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
Description: DB PostgreSQL support
 The openscada-db-postgresql package - provides support of the DB PostgreSQL.

Package: openscada-db-ldap
Architecture: any
Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
Description: LDAP support
 The openscada-db-ldap package - provides support of LDAP.

#===== DAQ subsystem modules =====
#Package: openscada-daq-javalikecalc
#Architecture: any
#Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
#Description: Java-like based calculator
# The openscada-daq-javalikecalc package - provides based on java like language calculator
# and engine of libraries. The user can create and modify functions and libraries.

#Package: openscada-daq-logiclev
#Architecture: any
#Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
#Description: Logic level
# The openscada-daq-logiclev package - provides the logical level of parameters.

Package: openscada-daq-blockcalc
Architecture: any
Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
Description: Block based calculator
 The openscada-daq-blockcalc package - provides block based calculator.

Package: openscada-daq-daqgate
Architecture: any
Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
Description: Data sources gate
 The openscada-daq-daqgate package - allows you to perform the locking of the
 data sources of the remote OpenSCADA stations in the local ones.

Package: openscada-daq-system
Architecture: any
Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
Description: System DA
 The openscada-daq-system package - provides data acquisition from the OS.
 Supported OS Linux data sources: HDDTemp, Sensors, Uptime, Memory, CPU,
 UPS etc.

Package: openscada-daq-soundcard
Architecture: any
Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
Description: Sound card
 The openscada-daq-soundcard package - provides access to sound card data.

Package: openscada-daq-modbus
Architecture: any
Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
Description: ModBus protocol and DAQ
 The openscada-daq-modbus package - provides realisation of ModBus client
 service. Supported Modbus/TCP, Modbus/RTU and Modbus/ASCII protocols.

Package: openscada-daq-dcon
Architecture: any
Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
Description: DCON client
 The openscada-daq-dcon package - provides an implementation of DCON-client
 protocol. Supports I-7000 DCON protocol.

Package: openscada-daq-snmp
Architecture: any
Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
Description: SNMP client
 The openscada-daq-snmp package - provides an implementation of the client
 of SNMP-service.

Package: openscada-daq-opcua
Architecture: any
Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
Description: OPC UA protocol and DAQ
 The openscada-daq-opcua package - provides realisation of OPC UA protocol.

Package: openscada-daq-mms
Architecture: any
Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
Description: Manufacturing Message Specification (MMS, IEC-9506)
 The openscada-daq-mms package - provides MMS(IEC-9506) client implementation.

Package: openscada-daq-diamondboards
Architecture: i386
Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
Description: Diamond DA boards
 The openscada-daq-diamondboards package - provides an access to "Diamond Systems" DAQ boards.
 Includes main support for all generic boards.

Package: openscada-daq-comedi
Architecture: any
Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
Description: DAQ boards by Comedi
 The openscada-daq-comedi package - provides ISA, PCI, PCMCIA, USB DAQ boards
 collection by Comedi(http://www.comedi.org).

Package: openscada-daq-siemens
Architecture: any
Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
Description: Siemens DAQ
 The openscada-daq-siemens package - provides a data source PLC Siemens
 by means of Hilscher CIF cards, by using the MPI protocol, and Libnodave
 library for the rest.

#Package: openscada-daq-icpdas
#Architecture: i386 arm
#Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
#Description: ICP DAS hardware
# The openscada-daq-icpdas - provides implementation for "ICP DAS" hardware support.
# Includes main I-87xxx DCON modules, I-8xxx fast modules and boards on ISA bus.

Package: openscada-daq-amrdevs
Architecture: any
Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
Description: AMR devices
 The openscada-daq-amrdevs package - provides access to automatic meter reading
 devices. Supported devices: Kontar (http://www.mzta.ru).

#Package: openscada-daq-bfn
#Architecture: any
#Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
#Description: Big Farm Net
# The openscada-daq-bfn package - provides Big Farm Net (BFN) modules support for
# Viper CT/BAS and other from "Big Dutchman" (http://www.bigdutchman.com).

#Package: openscada-daq-gpio
#Architecture: any
#Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
#Description: GPIO
# The openscada-daq-gpio package - Broadcom BCM 2835 GPIO and other.
# Mostly for and used in Raspberry Pi.

#===== Archiver subsystem modules =====
Package: openscada-arh-fsarch
Architecture: any
Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
Description: To file system archiver
 The openscada-arh-fsarch package - provides functions for messages and values
 archiving to file system.

Package: openscada-arh-dbarch
Architecture: any
Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
Description: To DB archiver
 The openscada-arh-dbarch package - provides functions for messages and values
 archiving to DB.

#===== Transport subsystem modules =====
#Package: openscada-tr-sockets
#Architecture: any
#Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
#Description: Transport: Sockets
# The openscada-tr-sockets package - provides sockets based transport.
# Supports inet and unix sockets. Inet socket uses TCP and UDP protocols.

#Package: openscada-tr-serial
#Architecture: any
#Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
#Description: Transport: Serial interfaces
# The openscada-tr-serial package - provides a serial interface.
# It is used to data exchange via the serial interfaces of type RS232, RS485, GSM and more.

Package: openscada-tr-ssl
Architecture: any
Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
Description: Transport: SSL
 The openscada-tr-ssl package - provides transport based on the secure sockets'
 layer. OpenSSL is used and SSLv2, SSLv3 and TLSv1 are supported.

#===== Transport protocol subsystem modules =====
#Package: openscada-prot-selfsystem
#Architecture: any
#Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
#Description: Self system OpenSCADA protocol
# The openscada-prot-selfsystem package - provides own OpenSCADA protocol based at XML
# and one's control interface.

Package: openscada-prot-http
Architecture: any
Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
Description: Protocol: HTTP-realisation
 The openscada-prot-http package - provides support for the HTTP protocol for
 WWW-based user interfaces.

#Package: openscada-prot-userprotocol
#Architecture: any
#Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
#Description: User protocol
# The openscada-prot-userprotocol package - allows you to create your own user
# protocols on any OpenSCADA's language.

#===== UI subsystem modules =====
Package: openscada-ui-webcfg
Architecture: any
Depends: openscada-core (= ${binary:Version}), openscada-prot-http, ${shlibs:Depends}, ${misc:Depends}
Description: System configurator (WEB)
 The openscada-ui-webcfg package - provides the WEB-based configurator of
 the OpenSCADA system.

Package: openscada-ui-webcfgd
Architecture: any
Depends: openscada-core (= ${binary:Version}), openscada-prot-http, ${shlibs:Depends}, ${misc:Depends}
Description: Dynamic WEB configurator
 The openscada-ui-webcfgd package - provides dynamic WEB based configurator.
 Uses XHTML, CSS and JavaScript technology.

Package: openscada-ui-vcaengine
Architecture: any
Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
Description: Visual Control Area (VCA) engine
 The openscada-ui-vcaengine package - the main visual control area engine.

Package: openscada-ui-webvision
Architecture: any
Depends: openscada-core (= ${binary:Version}), openscada-prot-http, ${shlibs:Depends}, ${misc:Depends}
Description: Operation user interface (WEB)
 The openscada-ui-webvision package - visual operation user interface,
 based on WEB - front-end to VCA engine.

Package: openscada-ui-webuser
Architecture: any
Depends: openscada-core (= ${binary:Version}), openscada-prot-http, ${shlibs:Depends}, ${misc:Depends}
Description: Web interface from user
 The openscada-ui-webuser package - allows you to create your own user
 web-interfaces in any language of OpenSCADA.

Package: openscada-ui-qtstarter
Architecture: any
Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
Description: Qt-based GUI starter
 The openscada-ui-qtstarter package - provides the Qt GUI starter.
 Qt-starter is the only and compulsory component for all GUI modules based on
 the Qt library.

Package: openscada-ui-qtcfg
Architecture: any
Depends: openscada-core (= ${binary:Version}), openscada-ui-qtstarter, ${shlibs:Depends}, ${misc:Depends}
Description: OpenSCADA system configurator (Qt)
 The openscada-ui-qtcfg package - provides the Qt-based configurator of
 the OpenSCADA system.

Package: openscada-ui-vision
Architecture: any
Depends: openscada-core (= ${binary:Version}), openscada-ui-qtstarter, ${shlibs:Depends}, ${misc:Depends}
Description: Operation user interface (Qt)
 The openscada-ui-vision package - visual operation user interface,
 based on Qt library - front-end to VCA engine.

#===== Special subsystem modules =====
Package: openscada-spec-systemtests
Architecture: any
Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
Description: OpenSCADA system's tests
 The openscada-spec-systemtests package - provides the group of tests to
 the OpenSCADA system.

#Package: openscada-spec-flibcomplex1
#Architecture: any
#Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
#Description: Complex1 function's library
# The openscada-spec-flibcomplex1 package - provides the library of functions compatible with
# SCADA Complex1 of the firm SIC "DIYA".

Package: openscada-spec-flibmath
Architecture: any
Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
Description: Math function's library
 The openscada-spec-flibmath package - provides the library of standard
 mathematical functions.

#Package: openscada-spec-flibsys
#Architecture: any
#Depends: openscada-core (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
#Description: System API functions
# The openscada-spec-flibsys package - provides the library of system API of user programming area.