|
Сообщение создано: 16. 02. 2016 [15:34]
|
|
sergehijo
Sergio Ehijo P.
Создатель темы
Зарегистрирован(а) с: 16.02.2016
Сообщения: 4
|
Hello,
I'm having problems trying to connect to an RS232 device using openScada. The system works as follows: i have a RFID card reader, that connects to a rs232/ethernet converter. And then through TCP/IP its connected to the computer. I want to read the data through openscada, and i cant configure it. Please, any help is welcome
|
|
Сообщение создано: 16. 02. 2016 [21:30]
|
|
roman
Roman Savochenko
Moderator Contributor Developer
Зарегистрирован(а) с: 12.12.2007
Сообщения: 3747
|
"sergehijo" wrote:
I'm having problems trying to connect to an RS232 device using openScada. The system works as follows: i have a RFID card reader, that connects to a rs232/ethernet converter. And then through TCP/IP its connected to the computer. I want to read the data through openscada, and i cant configure it.
So do it reading here.
Learn, learn and learn better than work, work and work.
|
|
Сообщение создано: 17. 02. 2016 [15:10]
|
|
fido_max
Maxim Kochetkov
Contributor
Зарегистрирован(а) с: 28.10.2010
Сообщения: 129
|
"sergehijo" wrote:
Hello,
I'm having problems trying to connect to an RS232 device using openScada. The system works as follows: i have a RFID card reader, that connects to a rs232/ethernet converter. And then through TCP/IP its connected to the computer. I want to read the data through openscada, and i cant configure it. Please, any help is welcome
What kind of RS232/ethernet converer and RFID reader do you use?
|
|
Сообщение создано: 17. 02. 2016 [19:39]
|
|
sergehijo
Sergio Ehijo P.
Создатель темы
Зарегистрирован(а) с: 16.02.2016
Сообщения: 4
|
"fido_max" wrote:
What kind of RS232/ethernet converer and RFID reader do you use?
I'm using a WIZSR110 conversor and RFID MIfare 13.56 Mhz reader
|
