Last forum posts : Project

Last forum posts : Project http://oscada.org/forum/topics/project/ Project en Thu, 16 Apr 2026 13:03:06 +0300 mm_forum powered by TYPO3 60 OPC UA client tag by processing http://oscada.org/forum/posts///10340/ Mon, 10 Feb 2025 22:32:28 +0200 I have a question how to do get value from OPC UA tag directly in widget processing javaScript, without define IO link, if possible this ? thank you. All that you can do wrote in the documentation — http://oscada.org/wiki/Special:MyLanguage/Modules/OPC_UA And OPC-UA operates by Nodes, not tags! And you can easy define the Nodes in attributes for the Standard parameter type. If you mean direct requesting OPC-UA, like to DAQ.ModBus messIO(string pdu), then the DAQ.OPC_UA module doesn't provide such function. "capvc" wrote:

I have a question how to do get value from OPC UA tag directly in widget processing javaScript, without define IO link, if possible this ?
thank you.

All that you can do wrote in the documentation — http://oscada.org/wiki/Special:MyLanguage/Modules/OPC_UA
And OPC-UA operates by Nodes, not tags!
And you can easy define the Nodes in attributes for the Standard parameter type.

If you mean direct requesting OPC-UA, like to DAQ.ModBus messIO(string pdu), then the DAQ.OPC_UA module doesn't provide such function. ]]> Project roman OPC UA client tag by processing http://oscada.org/forum/posts///10339/ Mon, 10 Feb 2025 12:58:05 +0200 Hi, I have a question how to do get value from OPC UA tag directly in widget processing javaScript, without define IO link, if possible this ? thank you. I have a question how to do get value from OPC UA tag directly in widget processing javaScript, without define IO link, if possible this ?
thank you. ]]> Project capvc Wago PLCs http://oscada.org/forum/posts///10319/ Fri, 01 Mar 2024 13:32:30 +0200 I apologize for writing too quickly in the forum. But my customer wants a solution real quick. Live Disks mentioned in Qiuck Start are very quick! :) If I can convince him of using OpenScada I would like to pay you for your effort. Which exactly? You pay here just for efforts I provide you right now I have a meeting today at 11:00 am with that customer and I am trying to get a working example for him. That is again just the Live Disks! Is it possible to get different pages for every user? So user1 logs in and gets only page1 and user2 gets page2? You can create SOs with different pages for different users, where one user will not access to pages of other, also you can place all elements both of them and set different access for the elements, you can generate the page completely dynamic and so on... "Aksels" wrote:

I apologize for writing too quickly in the forum. But my customer wants a solution real quick.

Live Disks mentioned in Qiuck Start are very quick! :)

"Aksels" wrote:

If I can convince him of using OpenScada I would like to pay you for your effort.

Which exactly? You pay here just for efforts I provide you right now

"Aksels" wrote:

I have a meeting today at 11:00 am with that customer and I am trying to get a working example for him.

That is again just the Live Disks!

"Aksels" wrote:

Is it possible to get different pages for every user?
So user1 logs in and gets only page1 and user2 gets page2?

You can create SOs with different pages for different users, where one user will not access to pages of other, also you can place all elements both of them and set different access for the elements, you can generate the page completely dynamic and so on... ]]> Project roman Wago PLCs http://oscada.org/forum/posts///10318/ Fri, 01 Mar 2024 11:45:14 +0200 Hi. Is it possible to get different pages for every user? So user1 logs in and gets only page1 and user2 gets page2? Sincerely, Aksels Is it possible to get different pages for every user?
So user1 logs in and gets only page1 and user2 gets page2?

Sincerely,
Aksels
]]> Project Aksels Wago PLCs http://oscada.org/forum/posts///10317/ Fri, 01 Mar 2024 09:52:43 +0200 Good morning. I apologize for writing too quickly in the forum. But my customer wants a solution real quick. If I can convince him of using OpenScada I would like to pay you for your effort. I have a meeting today at 11:00 am with that customer and I am trying to get a working example for him. With your help (reminding me kindly of reading thoroughly and beeing precise) I managed to get an integer data correctly from a life plc. Thank you very much. Now I try to visualize that value. I will report back.. Sincerely, Aksels
I apologize for writing too quickly in the forum. But my customer wants a solution real quick. If I can convince him of using OpenScada I would like to pay you for your effort.
I have a meeting today at 11:00 am with that customer and I am trying to get a working example for him.

With your help (reminding me kindly of reading thoroughly and beeing precise) I managed to get an integer data correctly from a life plc.
Thank you very much.
Now I try to visualize that value.

I will report back..
Sincerely,
Aksels
]]> Project Aksels Wago PLCs http://oscada.org/forum/posts///10316/ Thu, 29 Feb 2024 18:55:48 +0200 I tried to set up a connection in OpenScada, although I did not find any examples I assumed, that the IP-Adress should be entered in TransportAddress. Whether the Quick Start manual is not examples? In the Datanode I entered R:12298:R:var1:Variable1 bit I always get an error. Where sould I put the IP-Adress? Is the syntax of the Attribute correct? How about the tooltip and the module manual? "Aksels" wrote:

I tried to set up a connection in OpenScada, although I did not find any examples I assumed, that the IP-Adress should be entered in TransportAddress.

Whether the Quick Start manual is not examples?

"Aksels" wrote:

In the Datanode I entered R:12298:R:var1:Variable1 bit I always get an error.
Where sould I put the IP-Adress?
Is the syntax of the Attribute correct?

How about the tooltip and the module manual? ]]> Project roman Wago PLCs http://oscada.org/forum/posts///10315/ Thu, 29 Feb 2024 13:43:58 +0200 Hi, I would like to use OpenScada to get Data from several PLCs (Wago 750-890). Wago has Modbus-TCP-Support. I tried to set up a connection in OpenScada, although I did not find any examples I assumed, that the IP-Adress should be entered in TransportAddress. In the Datanode I entered R:12298:R:var1:Variable1 bit I always get an error. Where sould I put the IP-Adress? Is the syntax of the Attribute correct? Sincerely, Aksels I would like to use OpenScada to get Data from several PLCs (Wago 750-890).
Wago has Modbus-TCP-Support.
I tried to set up a connection in OpenScada, although I did not find any examples I assumed, that the IP-Adress should be entered in TransportAddress.
In the Datanode I entered R:12298:R:var1:Variable1 bit I always get an error.
Where sould I put the IP-Adress?
Is the syntax of the Attribute correct?

Sincerely,
Aksels

]]> Project Aksels RHEL 8.2 - building and installing openscada from source http://oscada.org/forum/posts///10227/ Wed, 20 Jul 2022 11:48:17 +0300 I have build openscada from source on RHEL 8.2 with "configure --disable-PostgreSQL --disable-FireBird --disable-SoundCard". What a problem in use the ready packages for CentOS 8 ? When I start openscada after installation from cmdline the following error appears: Build and install packages! Any Idea about the reason for the problem ? You have a mixed installation from building different OpenSCADA versions due to such symbol is missing in both actual LTS and Work branches! "thomas" wrote:

I have build openscada from source on RHEL 8.2 with "configure --disable-PostgreSQL --disable-FireBird --disable-SoundCard".

What a problem in use the ready packages for CentOS 8 ?

"thomas" wrote:

When I start openscada after installation from cmdline the following error appears:

Build and install packages!

"thomas" wrote:

Any Idea about the reason for the problem ?

You have a mixed installation from building different OpenSCADA versions due to such symbol is missing in both actual LTS and Work branches! ]]> Project roman RHEL 8.2 - building and installing openscada from source http://oscada.org/forum/posts///10226/ Wed, 20 Jul 2022 10:55:51 +0300 Hello, I have build openscada from source on RHEL 8.2 with "configure --disable-PostgreSQL --disable-FireBird --disable-SoundCard". When I start openscada after installation from cmdline the following error appears: 2022-07-20T03:34:40 3 Anfangsstation > Module Scheduler: Fehler SO '/usr/lib/openscada/ui_QTStarter.so': /usr/lib/openscada/ui_QTStarter.so: undefined symbol: _ZTVN9QTStarter11StartDialogE I can't find the undefined symbol in the sources. Maybe it's an internal qt problem. I have installed the following qt5 packages: # rpm -qa | grep qt5 qt5-qtbase-common-5.12.5-4.el8.noarch qt5-qtbase-devel-5.12.5-4.el8.x86_64 qt5-qtbase-5.12.5-4.el8.x86_64 qt5-qtdeclarative-5.12.5-1.el8.x86_64 qt5-qtsensors-devel-5.12.5-1.el8.x86_64 qt5-qtsensors-5.12.5-1.el8.x86_64 qt5-srpm-macros-5.12.5-3.el8.noarch qt5-qtbase-gui-5.12.5-4.el8.x86_64 qt5-rpm-macros-5.12.5-3.el8.noarch Any Idea about the reason for the problem ? Here are some additional information: ./configure --disable-PostgreSQL --disable-FireBird --disable-SoundCard ============ Final configuration results ============== * Status: - To enable (yes), to include/builtin (incl), for a distributive (dist), to disable (no) all modules = individual - Cross compilation = no - The core library compilation only in static = no * Generic features: - Strings charset encode support (by iconv) = yes - Interfaces internationalisation (I18N) support (by LibIntl) = yes - LibGD forcing for the core and the modules = no - Compilation modules of the sunsystems: "DB": SQLite MySQL DBF DBGate "DAQ": JavaLikeCalc LogicLev BlockCalc DAQGate System ModBus DCON OPC_UA SNMP Siemens AMRDevs "Archive": FSArch DBArch "Transport": Sockets Serial SSL "Transport's protocol": SelfSystem UserProtocol HTTP "UI": VCAEngine QTStarter QTCfg Vision WebCfg WebCfgD WebVision WebUser "Special": FLibSYS SystemTests FLibMath FLibComplex1 - Including/builtin modules to the OpenSCADA core: * Features of some specific modules: - FFTW3 to obtain spectrum of signal: - Library of the Linux sensors: -lsensors - Web-browser's engine WebKit: - Media player's engine: # openscada 2022-07-20T03:34:40 1 Anfangsstation: Laden. 2022-07-20T03:34:40 1 Anfangsstation > Datenbank: Modul 'SQLite' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > Datenbank: Modul 'MySQL' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > Datenbank: Modul 'DBF' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > Datenbank: Modul 'DBGate' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > Datenerfassung: Modul 'JavaLikeCalc' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > Datenerfassung: Modul 'LogicLev' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > Datenerfassung: Modul 'BlockCalc' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > Datenerfassung: Modul 'DAQGate' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > Datenerfassung: Modul 'System' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > TransportProtokolle: Modul 'ModBus' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > Datenerfassung: Modul 'ModBus' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > Datenerfassung: Modul 'DCON' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > TransportProtokolle: Modul 'OPC_UA' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > Datenerfassung: Modul 'OPC_UA' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > Datenerfassung: Modul 'SNMP' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > Datenerfassung: Modul 'Siemens' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > Datenerfassung: Modul 'AMRDevs' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > Archiv-Geschichte: Modul 'FSArch' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > Archiv-Geschichte: Modul 'DBArch' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > Übertragungen: Modul 'Sockets' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > Übertragungen: Modul 'Serial' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > Übertragungen: Modul 'SSL' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > TransportProtokolle: Modul 'SelfSystem' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > TransportProtokolle: Modul 'UserProtocol' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > TransportProtokolle: Modul 'HTTP' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > Benutzerschnittstellen: Modul 'VCAEngine' Verbindung. 2022-07-20T03:34:40 3 Anfangsstation > Module Scheduler: Fehler SO '/usr/lib/openscada/ui_QTStarter.so': /usr/lib/openscada/ui_QTStarter.so: undefined symbol: _ZTVN9QTStarter11StartDialogE 2022-07-20T03:34:40 1 Anfangsstation > Benutzerschnittstellen: Modul 'QTCfg' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > Benutzerschnittstellen: Modul 'Vision' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > Benutzerschnittstellen: Modul 'WebCfg' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > Benutzerschnittstellen: Modul 'WebCfgD' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > Benutzerschnittstellen: Modul 'WebVision' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > Benutzerschnittstellen: Modul 'WebUser' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > Zusätze: Modul 'FLibSYS' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > Zusätze: Modul 'SystemTests' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > Zusätze: Modul 'FLibMath' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > Zusätze: Modul 'FLibComplex1' Verbindung. 2022-07-20T03:34:40 1 Anfangsstation > Benutzerschnittstellen > VCAEngine: Widgetsbibliothek einschalten. 2022-07-20T03:34:40 1 Anfangsstation: Starten. 2022-07-20T03:34:40 1 Anfangsstation: Starten abgeschlossen ist! # ldd /usr/lib/openscada/ui_QTStarter.so linux-vdso.so.1 (0x00007fffef9f7000) liboscada.so.4 => /usr/lib/liboscada.so.4 (0x00007f7f54ec5000) libpcre.so.1 => /lib64/libpcre.so.1 (0x00007f7f54c54000) libz.so.1 => /lib64/libz.so.1 (0x00007f7f54a3d000) libcrypt.so.1 => /lib64/libcrypt.so.1 (0x00007f7f54814000) libdl.so.2 => /lib64/libdl.so.2 (0x00007f7f54610000) libQt5PrintSupport.so.5 => /lib64/libQt5PrintSupport.so.5 (0x00007f7f5577c000) libQt5Widgets.so.5 => /lib64/libQt5Widgets.so.5 (0x00007f7f53f8d000) libQt5Gui.so.5 => /lib64/libQt5Gui.so.5 (0x00007f7f53a65000) libQt5Sensors.so.5 => /lib64/libQt5Sensors.so.5 (0x00007f7f55738000) libQt5Core.so.5 => /lib64/libQt5Core.so.5 (0x00007f7f5354c000) libstdc++.so.6 => /lib64/libstdc++.so.6 (0x00007f7f531b7000) libm.so.6 => /lib64/libm.so.6 (0x00007f7f52e35000) libc.so.6 => /lib64/libc.so.6 (0x00007f7f52a73000) libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00007f7f5285b000) libpthread.so.0 => /lib64/libpthread.so.0 (0x00007f7f5263b000) /lib64/ld-linux-x86-64.so.2 (0x00007f7f555ce000) libGL.so.1 => /lib64/libGL.so.1 (0x00007f7f523a8000) libpng16.so.16 => /lib64/libpng16.so.16 (0x00007f7f52173000) libharfbuzz.so.0 => /lib64/libharfbuzz.so.0 (0x00007f7f51ecd000) libsystemd.so.0 => /lib64/libsystemd.so.0 (0x00007f7f51b89000) libicui18n.so.60 => /lib64/libicui18n.so.60 (0x00007f7f516c8000) libicuuc.so.60 => /lib64/libicuuc.so.60 (0x00007f7f51306000) libicudata.so.60 => /lib64/libicudata.so.60 (0x00007f7f4f75c000) libpcre2-16.so.0 => /lib64/libpcre2-16.so.0 (0x00007f7f4f4e3000) libgthread-2.0.so.0 => /lib64/libgthread-2.0.so.0 (0x00007f7f4f2e1000) libglib-2.0.so.0 => /lib64/libglib-2.0.so.0 (0x00007f7f4efc8000) libGLX.so.0 => /lib64/libGLX.so.0 (0x00007f7f4ed96000) libX11.so.6 => /lib64/libX11.so.6 (0x00007f7f4ea52000) libXext.so.6 => /lib64/libXext.so.6 (0x00007f7f4e83f000) libGLdispatch.so.0 => /lib64/libGLdispatch.so.0 (0x00007f7f4e583000) libfreetype.so.6 => /lib64/libfreetype.so.6 (0x00007f7f4e2c7000) libgraphite2.so.3 => /lib64/libgraphite2.so.3 (0x00007f7f4e09b000) librt.so.1 => /lib64/librt.so.1 (0x00007f7f4de92000) liblzma.so.5 => /lib64/liblzma.so.5 (0x00007f7f4dc6b000) liblz4.so.1 => /lib64/liblz4.so.1 (0x00007f7f4da54000) libcap.so.2 => /lib64/libcap.so.2 (0x00007f7f4d84e000) libmount.so.1 => /lib64/libmount.so.1 (0x00007f7f4d5f4000) libgcrypt.so.20 => /lib64/libgcrypt.so.20 (0x00007f7f4d2d8000) libgnutls.so.30 => /lib64/libgnutls.so.30 (0x00007f7f4cf1c000) libxcb.so.1 => /lib64/libxcb.so.1 (0x00007f7f4ccf3000) libbz2.so.1 => /lib64/libbz2.so.1 (0x00007f7f4cae2000) libblkid.so.1 => /lib64/libblkid.so.1 (0x00007f7f4c890000) libuuid.so.1 => /lib64/libuuid.so.1 (0x00007f7f4c688000) libselinux.so.1 => /lib64/libselinux.so.1 (0x00007f7f4c45d000) libgpg-error.so.0 => /lib64/libgpg-error.so.0 (0x00007f7f4c23c000) libp11-kit.so.0 => /lib64/libp11-kit.so.0 (0x00007f7f4bf09000) libidn2.so.0 => /lib64/libidn2.so.0 (0x00007f7f4bceb000) libunistring.so.2 => /lib64/libunistring.so.2 (0x00007f7f4b96a000) libtasn1.so.6 => /lib64/libtasn1.so.6 (0x00007f7f4b757000) libnettle.so.6 => /lib64/libnettle.so.6 (0x00007f7f4b51e000) libhogweed.so.4 => /lib64/libhogweed.so.4 (0x00007f7f4b2ee000) libgmp.so.10 => /lib64/libgmp.so.10 (0x00007f7f4b056000) libXau.so.6 => /lib64/libXau.so.6 (0x00007f7f4ae52000) libpcre2-8.so.0 => /lib64/libpcre2-8.so.0 (0x00007f7f4abce000) libffi.so.6 => /lib64/libffi.so.6 (0x00007f7f4a9c5000) # Regards Thomas
I have build openscada from source on RHEL 8.2 with "configure --disable-PostgreSQL --disable-FireBird --disable-SoundCard".

When I start openscada after installation from cmdline the following error appears:

2022-07-20T03:34:40 3[/sub_ModSched/] Anfangsstation > Module Scheduler: Fehler SO '/usr/lib/openscada/ui_QTStarter.so': /usr/lib/openscada/ui_QTStarter.so: undefined symbol: _ZTVN9QTStarter11StartDialogE

I can't find the undefined symbol in the sources. Maybe it's an internal qt problem. I have installed the following qt5 packages:

[root@openscada openscada_installation]# rpm -qa | grep qt5
qt5-qtbase-common-5.12.5-4.el8.noarch
qt5-qtbase-devel-5.12.5-4.el8.x86_64
qt5-qtbase-5.12.5-4.el8.x86_64
qt5-qtdeclarative-5.12.5-1.el8.x86_64
qt5-qtsensors-devel-5.12.5-1.el8.x86_64
qt5-qtsensors-5.12.5-1.el8.x86_64
qt5-srpm-macros-5.12.5-3.el8.noarch
qt5-qtbase-gui-5.12.5-4.el8.x86_64
qt5-rpm-macros-5.12.5-3.el8.noarch

Any Idea about the reason for the problem ?

Here are some additional information:

./configure --disable-PostgreSQL --disable-FireBird --disable-SoundCard

============ Final configuration results ==============
* Status:
- To enable (yes), to include/builtin (incl), for a distributive (dist), to disable (no) all modules = individual
- Cross compilation = no
- The core library compilation only in static = no
* Generic features:
- Strings charset encode support (by iconv) = yes
- Interfaces internationalisation (I18N) support (by LibIntl) = yes
- LibGD forcing for the core and the modules = no
- Compilation modules of the sunsystems:
"DB": SQLite MySQL DBF DBGate
"DAQ": JavaLikeCalc LogicLev BlockCalc DAQGate System ModBus DCON OPC_UA SNMP Siemens AMRDevs
"Archive": FSArch DBArch
"Transport": Sockets Serial SSL
"Transport's protocol": SelfSystem UserProtocol HTTP
"UI": VCAEngine QTStarter QTCfg Vision WebCfg WebCfgD WebVision WebUser
"Special": FLibSYS SystemTests FLibMath FLibComplex1
- Including/builtin modules to the OpenSCADA core:
* Features of some specific modules:
- FFTW3 to obtain spectrum of signal:
- Library of the Linux sensors: -lsensors
- Web-browser's engine WebKit:
- Media player's engine:

[root@openscada ~]# openscada
2022-07-20T03:34:40 1[/] Anfangsstation: Laden.
2022-07-20T03:34:40 1[/sub_BD/] Anfangsstation > Datenbank: Modul 'SQLite' Verbindung.
2022-07-20T03:34:40 1[/sub_BD/] Anfangsstation > Datenbank: Modul 'MySQL' Verbindung.
2022-07-20T03:34:40 1[/sub_BD/] Anfangsstation > Datenbank: Modul 'DBF' Verbindung.
2022-07-20T03:34:40 1[/sub_BD/] Anfangsstation > Datenbank: Modul 'DBGate' Verbindung.
2022-07-20T03:34:40 1[/sub_DAQ/] Anfangsstation > Datenerfassung: Modul 'JavaLikeCalc' Verbindung.
2022-07-20T03:34:40 1[/sub_DAQ/] Anfangsstation > Datenerfassung: Modul 'LogicLev' Verbindung.
2022-07-20T03:34:40 1[/sub_DAQ/] Anfangsstation > Datenerfassung: Modul 'BlockCalc' Verbindung.
2022-07-20T03:34:40 1[/sub_DAQ/] Anfangsstation > Datenerfassung: Modul 'DAQGate' Verbindung.
2022-07-20T03:34:40 1[/sub_DAQ/] Anfangsstation > Datenerfassung: Modul 'System' Verbindung.
2022-07-20T03:34:40 1[/sub_Protocol/] Anfangsstation > TransportProtokolle: Modul 'ModBus' Verbindung.
2022-07-20T03:34:40 1[/sub_DAQ/] Anfangsstation > Datenerfassung: Modul 'ModBus' Verbindung.
2022-07-20T03:34:40 1[/sub_DAQ/] Anfangsstation > Datenerfassung: Modul 'DCON' Verbindung.
2022-07-20T03:34:40 1[/sub_Protocol/] Anfangsstation > TransportProtokolle: Modul 'OPC_UA' Verbindung.
2022-07-20T03:34:40 1[/sub_DAQ/] Anfangsstation > Datenerfassung: Modul 'OPC_UA' Verbindung.
2022-07-20T03:34:40 1[/sub_DAQ/] Anfangsstation > Datenerfassung: Modul 'SNMP' Verbindung.
2022-07-20T03:34:40 1[/sub_DAQ/] Anfangsstation > Datenerfassung: Modul 'Siemens' Verbindung.
2022-07-20T03:34:40 1[/sub_DAQ/] Anfangsstation > Datenerfassung: Modul 'AMRDevs' Verbindung.
2022-07-20T03:34:40 1[/sub_Archive/] Anfangsstation > Archiv-Geschichte: Modul 'FSArch' Verbindung.
2022-07-20T03:34:40 1[/sub_Archive/] Anfangsstation > Archiv-Geschichte: Modul 'DBArch' Verbindung.
2022-07-20T03:34:40 1[/sub_Transport/] Anfangsstation > Übertragungen: Modul 'Sockets' Verbindung.
2022-07-20T03:34:40 1[/sub_Transport/] Anfangsstation > Übertragungen: Modul 'Serial' Verbindung.
2022-07-20T03:34:40 1[/sub_Transport/] Anfangsstation > Übertragungen: Modul 'SSL' Verbindung.
2022-07-20T03:34:40 1[/sub_Protocol/] Anfangsstation > TransportProtokolle: Modul 'SelfSystem' Verbindung.
2022-07-20T03:34:40 1[/sub_Protocol/] Anfangsstation > TransportProtokolle: Modul 'UserProtocol' Verbindung.
2022-07-20T03:34:40 1[/sub_Protocol/] Anfangsstation > TransportProtokolle: Modul 'HTTP' Verbindung.
2022-07-20T03:34:40 1[/sub_UI/] Anfangsstation > Benutzerschnittstellen: Modul 'VCAEngine' Verbindung.
2022-07-20T03:34:40 3[/sub_ModSched/] Anfangsstation > Module Scheduler: Fehler SO '/usr/lib/openscada/ui_QTStarter.so': /usr/lib/openscada/ui_QTStarter.so: undefined symbol: _ZTVN9QTStarter11StartDialogE
2022-07-20T03:34:40 1[/sub_UI/] Anfangsstation > Benutzerschnittstellen: Modul 'QTCfg' Verbindung.
2022-07-20T03:34:40 1[/sub_UI/] Anfangsstation > Benutzerschnittstellen: Modul 'Vision' Verbindung.
2022-07-20T03:34:40 1[/sub_UI/] Anfangsstation > Benutzerschnittstellen: Modul 'WebCfg' Verbindung.
2022-07-20T03:34:40 1[/sub_UI/] Anfangsstation > Benutzerschnittstellen: Modul 'WebCfgD' Verbindung.
2022-07-20T03:34:40 1[/sub_UI/] Anfangsstation > Benutzerschnittstellen: Modul 'WebVision' Verbindung.
2022-07-20T03:34:40 1[/sub_UI/] Anfangsstation > Benutzerschnittstellen: Modul 'WebUser' Verbindung.
2022-07-20T03:34:40 1[/sub_Special/] Anfangsstation > Zusätze: Modul 'FLibSYS' Verbindung.
2022-07-20T03:34:40 1[/sub_Special/] Anfangsstation > Zusätze: Modul 'SystemTests' Verbindung.
2022-07-20T03:34:40 1[/sub_Special/] Anfangsstation > Zusätze: Modul 'FLibMath' Verbindung.
2022-07-20T03:34:40 1[/sub_Special/] Anfangsstation > Zusätze: Modul 'FLibComplex1' Verbindung.
2022-07-20T03:34:40 1[/sub_UI/mod_VCAEngine/wlb_originals/] Anfangsstation > Benutzerschnittstellen > VCAEngine: Widgetsbibliothek einschalten.
2022-07-20T03:34:40 1[/] Anfangsstation: Starten.
2022-07-20T03:34:40 1[/] Anfangsstation: Starten abgeschlossen ist!

[root@openscada ~]# ldd /usr/lib/openscada/ui_QTStarter.so
linux-vdso.so.1 (0x00007fffef9f7000)
liboscada.so.4 => /usr/lib/liboscada.so.4 (0x00007f7f54ec5000)
libpcre.so.1 => /lib64/libpcre.so.1 (0x00007f7f54c54000)
libz.so.1 => /lib64/libz.so.1 (0x00007f7f54a3d000)
libcrypt.so.1 => /lib64/libcrypt.so.1 (0x00007f7f54814000)
libdl.so.2 => /lib64/libdl.so.2 (0x00007f7f54610000)
libQt5PrintSupport.so.5 => /lib64/libQt5PrintSupport.so.5 (0x00007f7f5577c000)
libQt5Widgets.so.5 => /lib64/libQt5Widgets.so.5 (0x00007f7f53f8d000)
libQt5Gui.so.5 => /lib64/libQt5Gui.so.5 (0x00007f7f53a65000)
libQt5Sensors.so.5 => /lib64/libQt5Sensors.so.5 (0x00007f7f55738000)
libQt5Core.so.5 => /lib64/libQt5Core.so.5 (0x00007f7f5354c000)
libstdc++.so.6 => /lib64/libstdc++.so.6 (0x00007f7f531b7000)
libm.so.6 => /lib64/libm.so.6 (0x00007f7f52e35000)
libc.so.6 => /lib64/libc.so.6 (0x00007f7f52a73000)
libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00007f7f5285b000)
libpthread.so.0 => /lib64/libpthread.so.0 (0x00007f7f5263b000)
/lib64/ld-linux-x86-64.so.2 (0x00007f7f555ce000)
libGL.so.1 => /lib64/libGL.so.1 (0x00007f7f523a8000)
libpng16.so.16 => /lib64/libpng16.so.16 (0x00007f7f52173000)
libharfbuzz.so.0 => /lib64/libharfbuzz.so.0 (0x00007f7f51ecd000)
libsystemd.so.0 => /lib64/libsystemd.so.0 (0x00007f7f51b89000)
libicui18n.so.60 => /lib64/libicui18n.so.60 (0x00007f7f516c8000)
libicuuc.so.60 => /lib64/libicuuc.so.60 (0x00007f7f51306000)
libicudata.so.60 => /lib64/libicudata.so.60 (0x00007f7f4f75c000)
libpcre2-16.so.0 => /lib64/libpcre2-16.so.0 (0x00007f7f4f4e3000)
libgthread-2.0.so.0 => /lib64/libgthread-2.0.so.0 (0x00007f7f4f2e1000)
libglib-2.0.so.0 => /lib64/libglib-2.0.so.0 (0x00007f7f4efc8000)
libGLX.so.0 => /lib64/libGLX.so.0 (0x00007f7f4ed96000)
libX11.so.6 => /lib64/libX11.so.6 (0x00007f7f4ea52000)
libXext.so.6 => /lib64/libXext.so.6 (0x00007f7f4e83f000)
libGLdispatch.so.0 => /lib64/libGLdispatch.so.0 (0x00007f7f4e583000)
libfreetype.so.6 => /lib64/libfreetype.so.6 (0x00007f7f4e2c7000)
libgraphite2.so.3 => /lib64/libgraphite2.so.3 (0x00007f7f4e09b000)
librt.so.1 => /lib64/librt.so.1 (0x00007f7f4de92000)
liblzma.so.5 => /lib64/liblzma.so.5 (0x00007f7f4dc6b000)
liblz4.so.1 => /lib64/liblz4.so.1 (0x00007f7f4da54000)
libcap.so.2 => /lib64/libcap.so.2 (0x00007f7f4d84e000)
libmount.so.1 => /lib64/libmount.so.1 (0x00007f7f4d5f4000)
libgcrypt.so.20 => /lib64/libgcrypt.so.20 (0x00007f7f4d2d8000)
libgnutls.so.30 => /lib64/libgnutls.so.30 (0x00007f7f4cf1c000)
libxcb.so.1 => /lib64/libxcb.so.1 (0x00007f7f4ccf3000)
libbz2.so.1 => /lib64/libbz2.so.1 (0x00007f7f4cae2000)
libblkid.so.1 => /lib64/libblkid.so.1 (0x00007f7f4c890000)
libuuid.so.1 => /lib64/libuuid.so.1 (0x00007f7f4c688000)
libselinux.so.1 => /lib64/libselinux.so.1 (0x00007f7f4c45d000)
libgpg-error.so.0 => /lib64/libgpg-error.so.0 (0x00007f7f4c23c000)
libp11-kit.so.0 => /lib64/libp11-kit.so.0 (0x00007f7f4bf09000)
libidn2.so.0 => /lib64/libidn2.so.0 (0x00007f7f4bceb000)
libunistring.so.2 => /lib64/libunistring.so.2 (0x00007f7f4b96a000)
libtasn1.so.6 => /lib64/libtasn1.so.6 (0x00007f7f4b757000)
libnettle.so.6 => /lib64/libnettle.so.6 (0x00007f7f4b51e000)
libhogweed.so.4 => /lib64/libhogweed.so.4 (0x00007f7f4b2ee000)
libgmp.so.10 => /lib64/libgmp.so.10 (0x00007f7f4b056000)
libXau.so.6 => /lib64/libXau.so.6 (0x00007f7f4ae52000)
libpcre2-8.so.0 => /lib64/libpcre2-8.so.0 (0x00007f7f4abce000)
libffi.so.6 => /lib64/libffi.so.6 (0x00007f7f4a9c5000)
[root@openscada ~]#

Regards
Thomas
]]> Project thomas export csv http://oscada.org/forum/posts///8611/ Sat, 18 Feb 2017 07:31:02 +0200 Thanks when i set valsForPix to 100 and change period time to 1h , 2h , 3h and 4h export csv distance 1 second but when change period time to 5h export csv to 2 second and ... how can export csv distance 1 second for every period ? thank you when i set valsForPix to 100 and change period time to 1h , 2h , 3h and 4h export csv distance 1 second but when change period time to 5h export csv to 2 second and ...
how can export csv distance 1 second for every period ?

thank you ]]> Project patak3000 export csv http://oscada.org/forum/posts///8605/ Thu, 16 Feb 2017 09:37:07 +0200 Dear Roman: Don't address directly to me in the forum! i want export csv from trend graph for 1 second but when i change period time Graphics group panel to 1h export csv to 4 second or 2h export 8 second and .... how i can export csv for all period for 1 second. You do export from the "Diagram" primitive then you can get its data only in the quality limit for the one point per pixel of width! But also you can change the property "valsForPix" of the diagram. "patak3000" wrote:

Dear Roman:

Don't address directly to me in the forum!

"patak3000" wrote:

i want export csv from trend graph for 1 second but when i change period time Graphics group panel to 1h export csv to 4 second or 2h export 8 second and ....

how i can export csv for all period for 1 second.

You do export from the "Diagram" primitive then you can get its data only in the quality limit for the one point per pixel of width!
But also you can change the property "valsForPix" of the diagram. ]]> Project roman export csv http://oscada.org/forum/posts///8602/ Thu, 16 Feb 2017 08:03:02 +0200 Dear Roman: hi i want export csv from trend graph for 1 second but when i change period time Graphics group panel to 1h export csv to 4 second or 2h export 8 second and .... how i can export csv for all period for 1 second. thank you hi
i want export csv from trend graph for 1 second but when i change period time Graphics group panel to 1h export csv to 4 second or 2h export 8 second and ....

how i can export csv for all period for 1 second.

thank you ]]> Project patak3000 Multi-trend / graph / chart http://oscada.org/forum/posts///8571/ Mon, 30 Jan 2017 21:30:32 +0200 Hidden in plain sight! Thanks for the links, Roman. Project dsjstc use valgrind for openscada: memory leakage issues http://oscada.org/forum/posts///8570/ Mon, 30 Jan 2017 10:31:43 +0200 tnx for response. i need to profile memory usage because when i run the QT visualization of the project my system experience high memory usage and works slow. (0.8.0.10) i read valgrind tutorial and it said that to have line number of error, you need to compile the code with gcc. i need to profile memory usage because when i run the QT visualization of the project my system experience high memory usage and works slow.
(0.8.0.10)

i read valgrind tutorial and it said that to have line number of error, you need to compile the code with gcc.
]]> Project manil2020 use valgrind for openscada: memory leakage issues http://oscada.org/forum/posts///8569/ Mon, 30 Jan 2017 08:41:36 +0200 i need help to use ValGrind for memory checking of openscada source codes. Why? I haven't get into OpenSCADA the memory leaks but it early also tested by ValGrind! do you know is it related to openscada version that i am using?(I am using 0.8.0.10) The version is too old and there allowed 0.8.16 version yet and more, for all like actions you must use 0.9 Work version instead! how can i fix gcc error messages to prepare code for profiling with valgrind? You must know it if you try to do that or use the ready builds with the debug information's packages! "manil2020" wrote:

i need help to use ValGrind for memory checking of openscada source codes.

Why? I haven't get into OpenSCADA the memory leaks but it early also tested by ValGrind!

"manil2020" wrote:

do you know is it related to openscada version that i am using?(I am using 0.8.0.10)

The version is too old and there allowed 0.8.16 version yet and more, for all like actions you must use 0.9 Work version instead!

"manil2020" wrote:

how can i fix gcc error messages to prepare code for profiling with valgrind?

You must know it if you try to do that or use the ready builds with the debug information's packages! ]]> Project roman use valgrind for openscada: memory leakage issues http://oscada.org/forum/posts///8568/ Mon, 30 Jan 2017 08:12:19 +0200 hi i need help to use ValGrind for memory checking of openscada source codes. the ValGrind finds memory leakage but it doesnt show me line number to fix it. i tried to compile openscada with gcc -g or -O0 but gcc compiler return me alot of error message.(i have testet widget.cpp; tsys.cpp; tcrnode.cpp with valgrind) do you know is it related to openscada version that i am using?(I am using 0.8.0.10) how can i fix gcc error messages to prepare code for profiling with valgrind? tnx i need help to use ValGrind for memory checking of openscada source codes.
the ValGrind finds memory leakage but it doesnt show me line number to fix it.
i tried to compile openscada with gcc -g or -O0 but gcc compiler return me alot of error message.(i have testet widget.cpp; tsys.cpp; tcrnode.cpp with valgrind)
do you know is it related to openscada version that i am using?(I am using 0.8.0.10)
how can i fix gcc error messages to prepare code for profiling with valgrind?
tnx

]]> Project manil2020 Multi-trend / graph / chart http://oscada.org/forum/posts///8567/ Thu, 26 Jan 2017 20:04:59 +0200 http://wiki.oscada.org/HomePageEn/Doc/Vision#h888-13 http://wiki.oscada.org/HomePageEn/Using/GraphicElementsLibraries/MainElements#h1039-30 http://oscada.org/en/main/solutions/single-page/article/acs-of-the-ball-drum-mills-bdm-287410-of-the-boiler-bkz-160-100-pt/ And much more! http://wiki.oscada.org/HomePageEn/Doc/Vision#h888-13
http://wiki.oscada.org/HomePageEn/Using/GraphicElementsLibraries/MainElements#h1039-30
http://oscada.org/en/main/solutions/single-page/article/acs-of-the-ball-drum-mills-bdm-287410-of-the-boiler-bkz-160-100-pt/

And much more! ]]> Project roman Multi-trend / graph / chart http://oscada.org/forum/posts///8566/ Thu, 26 Jan 2017 19:46:27 +0200 Hi! I've been exploring OpenSCADA and I'm impressed by what I see. However, I can't find anything providing multi-trend functionality -- in other words, the ability to graph the histories of several inputs on the same chart, possibly with different scales. Here's an example. Does anything like that exist in OpenSCADA?
However, I can't find anything providing multi-trend functionality -- in other words, the ability to graph the histories of several inputs on the same chart, possibly with different scales. Here's an example.

Does anything like that exist in OpenSCADA? ]]> Project dsjstc compile error for openscada-0.8.14 http://oscada.org/forum/posts///8001/ Tue, 23 Feb 2016 16:23:29 +0200 i download original source code openscada-0.8.14 for Linux. i use both openscada-res-0.8.14.tar_3 and openscada-0.8.14.tar. i install it like installation manual. i have error in making step. the picture has been attached shown error in make . http://oscada.org/en/development/tasks/posts/core/the_automatic_openscada_builder/ ftp://ftp.oscada.org/OpenSCADA/0.8.0/Ubuntu/12.04/ "aminsalmani.science" wrote:

i download original source code openscada-0.8.14 for Linux. i use both openscada-res-0.8.14.tar_3 and openscada-0.8.14.tar. i install it like installation manual. i have error in making step. the picture has been attached shown error in make .

http://oscada.org/en/development/tasks/posts/core/the_automatic_openscada_builder/
ftp://ftp.oscada.org/OpenSCADA/0.8.0/Ubuntu/12.04/ ]]> Project roman compile error for openscada-0.8.14 http://oscada.org/forum/posts///7996/ Sat, 20 Feb 2016 09:26:22 +0200 yes i install all demand in this document. i install portaudio19(http://packages.ubuntu.com/precise/devel/portaudio19-dev) but it didn't work. if each of these demands didn't install , it would make an error in configure step. the error that i have is in make step no configure step. do you think this error because of liportaudio?? thank you http://packages.ubuntu.com/precise/devel/portaudio19-dev) but it didn't work. if each of these demands didn't install , it would make an error in configure step.
the error that i have is in make step no configure step.
do you think this error because of liportaudio??

thank you ]]> Project aminsalmani.science compile error for openscada-0.8.14 http://oscada.org/forum/posts///7995/ Sat, 20 Feb 2016 08:58:01 +0200 error in this picture is in sound.cpp May be you will start to read? Are you read the demands for compiling at all: http://wiki.oscada.org/HomePageEn/Function#h737-7 DAQ.SoundCard module libportaudio Multiplatform library for access to sound controller version 19 and higher. "aminsalmani.science" wrote:

error in this picture is in sound.cpp

May be you will start to read?
Are you read the demands for compiling at all: http://wiki.oscada.org/HomePageEn/Function#h737-7

DAQ.SoundCard module
libportaudio Multiplatform library for access to sound controller version 19 and higher.

]]> Project roman compile error for openscada-0.8.14 http://oscada.org/forum/posts///7993/ Fri, 19 Feb 2016 23:49:11 +0200 hi i download original source code openscada-0.8.14 for Linux. i use both openscada-res-0.8.14.tar_3 and openscada-0.8.14.tar. i install it like installation manual. i have error in making step. the picture has been attached shown error in make . i follow this steps autoreconf -ivf ./configure make-->error has been detected. error in this picture is in sound.cpp thank you i download original source code openscada-0.8.14 for Linux. i use both openscada-res-0.8.14.tar_3 and openscada-0.8.14.tar. i install it like installation manual. i have error in making step. the picture has been attached shown error in make .
i follow this steps
autoreconf -ivf
./configure
make-->error has been detected.
error in this picture is in sound.cpp

thank you ]]> Project aminsalmani.science Windows OS Support http://oscada.org/forum/posts///7170/ Thu, 12 Feb 2015 14:18:11 +0200 do you have a Windows version installation package ? I do not by for now OpenSCADA is not adapted to MS Windows yet, see here: http://oscada.org/en/development/tasks/posts/tasks_forming_formirovanie_zadach/adapting_openscada_to_work_on_os_ms_windows/ "fgdevel" wrote:

do you have a Windows version installation package ?

I do not by for now OpenSCADA is not adapted to MS Windows yet, see here: http://oscada.org/en/development/tasks/posts/tasks_forming_formirovanie_zadach/adapting_openscada_to_work_on_os_ms_windows/ ]]> Project roman Windows OS Support http://oscada.org/forum/posts///7169/ Thu, 12 Feb 2015 11:45:57 +0200 Hello, do you have a Windows version installation package ? otherwise, what the solution to install OpenSCADA on a Windows (XP, Seven) computer ? Thanks.
do you have a Windows version installation package ?
otherwise, what the solution to install OpenSCADA on a Windows (XP, Seven) computer ?

Thanks. ]]> Project fgdevel Support French language http://oscada.org/forum/posts///7085/ Wed, 21 Jan 2015 11:15:09 +0200 Or tell me from what you want start and I will create the file, and left that into OpenSCADA sources tree. I have generated *.pot files for OpenSCADA core and the modules. You can get the files from here for: - core: http://oscada.org/svn/trunk/OpenSCADA/src/po - for modules like SQLite: http://oscada.org/svn/trunk/OpenSCADA/src/moduls/bd/SQLite/po "roman" wrote:

Or tell me from what you want start and I will create the file, and left that into OpenSCADA sources tree.

I have generated *.pot files for OpenSCADA core and the modules. You can get the files from here for:
- core: http://oscada.org/svn/trunk/OpenSCADA/src/po
- for modules like SQLite: http://oscada.org/svn/trunk/OpenSCADA/src/moduls/bd/SQLite/po ]]> Project roman Support French language http://oscada.org/forum/posts///7081/ Tue, 20 Jan 2015 15:20:48 +0200 OK, thanks a lot. We're making .po files and we'll give you theses files (to include them in OpenSCADA sources ? ;-) ) when we finish.
We're making .po files and we'll give you theses files (to include them in OpenSCADA sources ? ;-) ) when we finish. ]]> Project fgdevel Support French language http://oscada.org/forum/posts///7080/ Tue, 20 Jan 2015 13:44:30 +0200 do you have .pot file(s) allowing us to create .po file(s) to translate OpenScada into French ? Not but the files create dynamical from actual sources by command "$ make messages" into proper core or the modules source directory. Or you can get nearest translation *.po for you and rename that to fr.po for next translation. Or tell me from what you want start and I will create the file, and left that into OpenSCADA sources tree. "fgdevel" wrote:

do you have .pot file(s) allowing us to create .po file(s) to translate OpenScada into French ?

Not but the files create dynamical from actual sources by command "$ make messages" into proper core or the modules source directory.
Or you can get nearest translation *.po for you and rename that to fr.po for next translation.
Or tell me from what you want start and I will create the file, and left that into OpenSCADA sources tree. ]]> Project roman Support French language http://oscada.org/forum/posts///7079/ Tue, 20 Jan 2015 11:28:05 +0200 Hello, do you have .pot file(s) allowing us to create .po file(s) to translate OpenScada into French ? Thanks.
do you have .pot file(s) allowing us to create .po file(s) to translate OpenScada into French ?

Thanks. ]]> Project fgdevel