Last forum posts : Miscellaneous http://oscada.org/forum/topics/miscellaneous/ Miscellaneous en Wed, 15 Apr 2026 04:03:24 +0300 mm_forum powered by TYPO3 60 There is no session and project of the VCA engine... http://oscada.org/forum/posts///10432/ Wed, 25 Mar 2026 07:09:00 +0200 I couldn't find the quick start in the manual, number 1003. 10003 doesn't do anything either. It doesn't matter. And me can ... "Fudodo" wrote:

I couldn't find the quick start in the manual, number 1003. 10003 doesn't do anything either. It doesn't matter.

And me can ... ]]> Miscellaneous roman There is no session and project of the VCA engine... http://oscada.org/forum/posts///10431/ Wed, 25 Mar 2026 00:25:17 +0200 I couldn't find the quick start in the manual, number 1003. 10003 doesn't do anything either. It doesn't matter. I reinstalled the system on debian 13. I added the repositories as instructed and a new restriction on SSL signature rejection appeared. I override it via edit /usr/share/apt/default-sequoia.config and set sha1.second_preimage_resistance to a later date. Then apt install openscada works. Now the system works on port 10002 thank You
I reinstalled the system on debian 13.
I added the repositories as instructed and a new restriction on SSL signature rejection appeared.
I override it via edit /usr/share/apt/default-sequoia.config and set sha1.second_preimage_resistance to a later date.
Then apt install openscada works.

Now the system works on port 10002

thank You

]]> Miscellaneous Fudodo There is no session and project of the VCA engine... http://oscada.org/forum/posts///10430/ Tue, 24 Mar 2026 07:51:53 +0200 It is you only are connected to a background Server service where is no VCA-Session, obviously! :) If you want to connect just started model in UI, you may use next WEB-port — 10003. And read Quick Start for understanding!
If you want to connect just started model in UI, you may use next WEB-port — 10003.

And read Quick Start for understanding! ]]> Miscellaneous roman There is no session and project of the VCA engine... http://oscada.org/forum/posts///10429/ Tue, 24 Mar 2026 00:59:23 +0200 Hi, i found version where web VCA working, Debian_8-OpenSCADA_1+r2991-TDE_R14-amd64-LiveCD_USB.iso, bud old debian regards Jozef
i found version where web VCA working, Debian_8-OpenSCADA_1+r2991-TDE_R14-amd64-LiveCD_USB.iso, bud old debian

regards Jozef ]]> Miscellaneous Fudodo There is no session and project of the VCA engine... http://oscada.org/forum/posts///10428/ Mon, 23 Mar 2026 23:19:34 +0200 Hi, I'm migrate to new virtual machine, installed Debian_13-OpenSCADA_1+r3056-TDE_R14-amd64-LiveCD_USB.iso On the web interface standard login to user. And on try to open Operation user interface show "There is no session and project of the VCA engine for the user!" same message on AGLKS and Boiler Migrating from old system thru backup and restore, and next try direct copy project folder. Same effect. On old machine web VCA working, system oscada have OpenScada 1+r3056. screenshot from not work web VCA attached. I tried a live installation Debian_12-OpenSCADA_1+r2961-TDE_R14-amd64-LiveCD_USB.iso What am I doing wrong? regards Jozef
I'm migrate to new virtual machine, installed Debian_13-OpenSCADA_1+r3056-TDE_R14-amd64-LiveCD_USB.iso
On the web interface standard login to user. And on try to open Operation user interface show "There is no session and project of the VCA engine for the user!"
same message on AGLKS and Boiler

Migrating from old system thru backup and restore, and next try direct copy project folder. Same effect.

On old machine web VCA working, system oscada have OpenScada 1+r3056.



screenshot from not work web VCA attached.

I tried a live installation Debian_12-OpenSCADA_1+r2961-TDE_R14-amd64-LiveCD_USB.iso

What am I doing wrong?

regards Jozef ]]> Miscellaneous Fudodo ModBus RTU/ASCII slave response delay http://oscada.org/forum/posts///10323/ Tue, 19 Mar 2024 16:31:47 +0200 I have not had any problems in ModBus/RTU slave mode with whether hardware COM adaptors or USB->RS485, but for some USB->RS485 adaptors you may have high latency what must you to set big value of the symbol time, which obviously must be set on the master side also. All those was wrote in the Notes part — http://oscada.org/wiki/Modules/Serial#Notes So, when you do not want of linking with the milliseconds of the symbol time as a criteria of the frame end of ModBus/RTU, just use MosBus/ASCII for such high latency USB->RS485 adaptors.
All those was wrote in the Notes part — http://oscada.org/wiki/Modules/Serial#Notes

So, when you do not want of linking with the milliseconds of the symbol time as a criteria of the frame end of ModBus/RTU, just use MosBus/ASCII for such high latency USB->RS485 adaptors. ]]> Miscellaneous roman ModBus RTU/ASCII slave response delay http://oscada.org/forum/posts///10322/ Tue, 19 Mar 2024 13:36:53 +0200 In this case, the emulator is Scada. I changed the frame time, but completely forgot about the ability to specify additional parameters. Unfortunately, these options are not available for incoming transport. I tried to set the mode of operation with the RTS signal and the delay, the time is shown adequately in the logs, the USB RS485 adapter circuit allows you to perform this trick. However, the debugging stand is not working correctly yet. Miscellaneous walhi ModBus RTU/ASCII slave response delay http://oscada.org/forum/posts///10321/ Tue, 19 Mar 2024 00:08:01 +0200 What about this — http://oscada.org/wiki/Modules/Serial#Output_transports NextReqMult — next request's multiplicator to the symbol time, 4 by default; http://oscada.org/wiki/Modules/Serial#Output_transports

NextReqMult — next request's multiplicator to the symbol time, 4 by default;
]]> Miscellaneous roman ModBus RTU/ASCII slave response delay http://oscada.org/forum/posts///10320/ Mon, 18 Mar 2024 18:26:22 +0200 To debug projects, I made an emulator of Modbus RTU input/output devices. Now I'm facing problems when the new hardware refuses to work with the emulator. There is an assumption that this is due to the half-duplex operating mode of the RS485 and a short delay in turning off the transceiver transmission mode inside the PLC. Everything looks correct in the transport logs, I’ll try to look at the signals with a logic analyzer to confirm the theory. On factory devices, the “response delay” parameter is sometimes encountered. Is there a way to implement delay in openscada? I tried to wrap up the exchange through a TSP/IP loop in the “network gateway” mode over the network, but this gives a delay of less than a millisecond. Miscellaneous walhi Problems with HTTPS on the site http://oscada.org/forum/posts///10305/ Wed, 10 Jan 2024 10:34:07 +0200 If so, then there really is no problem. I entered a short link, without specifying the protocol. The browser automatically applied HTTPS. Then it’s a little strange that the web server also responds on port 443. He is responding only: HTTP/1.1 200 OK Date: Wed, 10 Jan 2024 08:23:30 GMT Server: Apache/2.2.22 (Debian) Last-Modified: Sat, 04 Apr 2015 17:55:14 GMT ETag: "2438-b1-512e9c454fbd0" Accept-Ranges: bytes Content-Length: 177 Vary: Accept-Encoding Content-Type: text/html <html><body><h1>It works!</h1> <p>This is the default web page for this server.</p> <p>The web server software is running but no content has been added, yet.</p> </body></html> So, there is only an empty default page. Are you planning to set up at least a free SSL certificate from Let's Encrypt? I have no problem with HTTP and I'll have problems at switching to HTTPS since I had ones at the previous try. But I'll seems try before the next LTS 0.9.7 update, before the our new year (РІКи-river) on 01.01.7532(01.03.2024). :) "walhi" wrote:

If so, then there really is no problem. I entered a short link, without specifying the protocol. The browser automatically applied HTTPS. Then it’s a little strange that the web server also responds on port 443.

He is responding only:

HTTP/1.1 200 OK
Date: Wed, 10 Jan 2024 08:23:30 GMT
Server: Apache/2.2.22 (Debian)
Last-Modified: Sat, 04 Apr 2015 17:55:14 GMT
ETag: "2438-b1-512e9c454fbd0"
Accept-Ranges: bytes
Content-Length: 177
Vary: Accept-Encoding
Content-Type: text/html

<html><body><h1>It works!</h1>
<p>This is the default web page for this server.</p>
<p>The web server software is running but no content has been added, yet.</p>
</body></html>


So, there is only an empty default page.

"walhi" wrote:

Are you planning to set up at least a free SSL certificate from Let's Encrypt?

I have no problem with HTTP and I'll have problems at switching to HTTPS since I had ones at the previous try.

But I'll seems try before the next LTS 0.9.7 update, before the our new year (РІКи-river) on 01.01.7532(01.03.2024). :) ]]> Miscellaneous roman Problems with HTTPS on the site http://oscada.org/forum/posts///10304/ Tue, 09 Jan 2024 21:08:26 +0200 What a problem with HTTPS when there is no HTTPS in whole on OpenSCADA WEB resources? :) If so, then there really is no problem. I entered a short link, without specifying the protocol. The browser automatically applied HTTPS. Then it’s a little strange that the web server also responds on port 443. Are you planning to set up at least a free SSL certificate from Let's Encrypt? "roman" wrote:

What a problem with HTTPS when there is no HTTPS in whole on OpenSCADA WEB resources? :)

If so, then there really is no problem. I entered a short link, without specifying the protocol. The browser automatically applied HTTPS. Then it’s a little strange that the web server also responds on port 443. Are you planning to set up at least a free SSL certificate from Let's Encrypt? ]]> Miscellaneous walhi Problems with HTTPS on the site http://oscada.org/forum/posts///10303/ Tue, 09 Jan 2024 08:36:28 +0200 When I try to open the site via HTTPS, the browser gives an error. Connecting via telnet showed that on port 443 there is HTTP instead of HTTPS. What a problem with HTTPS when there is no HTTPS in whole on OpenSCADA WEB resources? :) "walhi" wrote:

When I try to open the site via HTTPS, the browser gives an error. Connecting via telnet showed that on port 443 there is HTTP instead of HTTPS.

What a problem with HTTPS when there is no HTTPS in whole on OpenSCADA WEB resources? :) ]]> Miscellaneous roman Problems with HTTPS on the site http://oscada.org/forum/posts///10302/ Mon, 08 Jan 2024 23:33:09 +0200 When I try to open the site via HTTPS, the browser gives an error. Connecting via telnet showed that on port 443 there is HTTP instead of HTTPS. Miscellaneous walhi Hope U R Well http://oscada.org/forum/posts///10203/ Wed, 13 Apr 2022 22:51:11 +0300 I think I get it. The thing i'm worried about (but sadly i'm not very suprised) is the thing thar "normal" RF people still support their "tzar" and calling this war as "operation". I don't get it. If this is the way they look at the world then it definitly it isn't putins war, but all russians war, so with or without m - still Russians (people of RF) are... orcs. The things they are doing in the UA are... there are no words to describe it, unhuman is a HUGE understatement. That is why I call them only as mRussian — m{oscovie|alo|ancurto}Russia — abomination, after 2014 and my reflection to the genocide 1932...1933 by them. Wait! You are saying that the part of the people who run out of UA are... core russians who lives in UA only few decades? I didn't knew the part of the history You are describing, I think I'll have to read about it. By the sovietiche occupant from 1920 year performed several geno-lingvo-etnocides, not counting the 300 years of the common mRussian lingvo-etnocides: - 1921-23: the first famine after the food expropriation for the red occupation army — 0.9...3.5 million UKRAINIAN dead. - 1932-33: the second-big famine after the food expropriation for the industrialisation and slaves for it — 8...10.5 million UKRAINIAN dead. - 1946-47: the third famine after the food expropriation for pay the land lease — about 1.5 million UKRAINIAN dead. And during all that time the sovietiche occupant up to 1991 was performed the total replacing the killed UKRAINIAN by mRussians and killing the Ukrainian language from all life, so up to the current time on the south-east-center of Ukraine, maximum 5% is who real talks on Ukrainian. The actual state you can estimate yourself reading, after translation, the article — http://oscada.org/ua/novini/odinochna-storinka/article/necrolog-of-tischenko-mykola-tarasovych/ and compare that with the languages support in OpenSCADA at the old Wiki, which I replaced only at 2016. Could You send some link/account no? I'm not a wealthy man and I don't want to feed any company in between, but pass all the money to the army of the UA. There created the common account — https://bank.gov.ua/en/news/all/natsionalniy-bank-vidkriv-spetsrahunok-dlya-zboru-koshtiv-na-potrebi-armiyi ps. maybe we should move to the PM style of messaging? We can if you want, but I think that what I write here will be useful for other in understanding the real state. "marcin" wrote:

I think I get it. The thing i'm worried about (but sadly i'm not very suprised) is the thing thar "normal" RF people still support their "tzar" and calling this war as "operation". I don't get it. If this is the way they look at the world then it definitly it isn't putins war, but all russians war, so with or without m - still Russians (people of RF) are... orcs. The things they are doing in the UA are... there are no words to describe it, unhuman is a HUGE understatement.

That is why I call them only as mRussian — m{oscovie|alo|ancurto}Russia — abomination, after 2014 and my reflection to the genocide 1932...1933 by them.

"marcin" wrote:

Wait! You are saying that the part of the people who run out of UA are... core russians who lives in UA only few decades?
I didn't knew the part of the history You are describing, I think I'll have to read about it.

By the sovietiche occupant from 1920 year performed several geno-lingvo-etnocides, not counting the 300 years of the common mRussian lingvo-etnocides:
- 1921-23: the first famine after the food expropriation for the red occupation army — 0.9...3.5 million UKRAINIAN dead.
- 1932-33: the second-big famine after the food expropriation for the industrialisation and slaves for it — 8...10.5 million UKRAINIAN dead.
- 1946-47: the third famine after the food expropriation for pay the land lease — about 1.5 million UKRAINIAN dead.

And during all that time the sovietiche occupant up to 1991 was performed the total replacing the killed UKRAINIAN by mRussians and killing the Ukrainian language from all life, so up to the current time on the south-east-center of Ukraine, maximum 5% is who real talks on Ukrainian.

The actual state you can estimate yourself reading, after translation, the article — http://oscada.org/ua/novini/odinochna-storinka/article/necrolog-of-tischenko-mykola-tarasovych/ and compare that with the languages support in OpenSCADA at the old Wiki, which I replaced only at 2016.

"marcin" wrote:

Could You send some link/account no? I'm not a wealthy man and I don't want to feed any company in between, but pass all the money to the army of the UA.

There created the common account — https://bank.gov.ua/en/news/all/natsionalniy-bank-vidkriv-spetsrahunok-dlya-zboru-koshtiv-na-potrebi-armiyi

"marcin" wrote:

ps. maybe we should move to the PM style of messaging?

We can if you want, but I think that what I write here will be useful for other in understanding the real state. ]]> Miscellaneous roman Hope U R Well http://oscada.org/forum/posts///10202/ Wed, 13 Apr 2022 02:26:58 +0300 echo "Hello World. Слава Украине" And that you have wrote by the mRussian-aggressor-occupant slapper!!! Ough - sorry! I didn't thought that the language i've learnt at school (while Poland was indeed under zsrr domination) is the russian-aggressor-occupant language and because I'm not very familiar with the UA language I didn't identified it as error. Sorry again! Non "russian", but mRussian — m{oscovie|alo|ancurto}Russia — abomination, and sure, the "empire" did perform the mRussiafication process on the occupied territories-colonies, so why the Ukrainian south-east-center remain under the mRussiafication and why the refugees in Poland slap in the tongue mostly. I think I get it. The thing i'm worried about (but sadly i'm not very suprised) is the thing thar "normal" RF people still support their "tzar" and calling this war as "operation". I don't get it. If this is the way they look at the world then it definitly it isn't putins war, but all russians war, so with or without m - still Russians (people of RF) are... orcs. The things they are doing in the UA are... there are no words to describe it, unhuman is a HUGE understatement. For Ukraine and other countries of the "folks prison" this war-invasion is a chance to disintegrate the mRussian empire at the last and get the real liberty. mRussia-moscovie from about 1720 has stolen from Ukraine-Rus all: name and history — Rus is in Ukraine near Kiev, language and its name — ukrainian-russian is very richer than mrussian-moscovian and nearer to the primary language — sanscritus. That is why mRussia-moscovie wants again completely destroy the source where they have stolen all and calls that directly as "denazification", that is destroying all folk's roots and transformation again to slaves with no memory — mancurts, completely as at USSR. Fingers crossed for UA! They want to finish of destroying the Ukrainian-Rus culture or to clean up the national renaissance after 2014 what appeared in contrary to the Ukraine government which is in fact the mRussian occupation administration all time after the formal (not real) independence declaration 1991, due to vote constantly by the sovetiche occupation populations at the absence in the fact of the real de-occupation of USSR occupation. And that is why most Ukrainian refugees talks not on Ukrainian-Rus language, but mRussian-moscovian one and they are very bad-tempered and brutal just as mRussians. Wait! You are saying that the part of the people who run out of UA are... core russians who lives in UA only few decades? I didn't knew the part of the history You are describing, I think I'll have to read about it. So let it be: echo "Hello World. Слава Україні" Героям Слава! Of course! ps. if there is something I can do for You please write me a prv msg. I need no help now personally, but thanks for your proposal. You may help Ukraine in general by transferring some funds to Its Army which is destroying the mRussian occupants now! Could You send some link/account no? I'm not a wealthy man and I don't want to feed any company in between, but pass all the money to the army of the UA. ps. maybe we should move to the PM style of messaging? "roman" wrote:

"marcin" wrote:

"roman" wrote:

"marcin" wrote:

echo "Hello World. Слава Украине"

And that you have wrote by the mRussian-aggressor-occupant slapper!!!

Ough - sorry! I didn't thought that the language i've learnt at school (while Poland was indeed under zsrr domination) is the russian-aggressor-occupant language and because I'm not very familiar with the UA language I didn't identified it as error. Sorry again!

Non "russian", but mRussian — m{oscovie|alo|ancurto}Russia — abomination, and sure, the "empire" did perform the mRussiafication process on the occupied territories-colonies, so why the Ukrainian south-east-center remain under the mRussiafication and why the refugees in Poland slap in the tongue mostly.


I think I get it. The thing i'm worried about (but sadly i'm not very suprised) is the thing thar "normal" RF people still support their "tzar" and calling this war as "operation". I don't get it. If this is the way they look at the world then it definitly it isn't putins war, but all russians war, so with or without m - still Russians (people of RF) are... orcs. The things they are doing in the UA are... there are no words to describe it, unhuman is a HUGE understatement.

"roman" wrote:

For Ukraine and other countries of the "folks prison" this war-invasion is a chance to disintegrate the mRussian empire at the last and get the real liberty. mRussia-moscovie from about 1720 has stolen from Ukraine-Rus all: name and history — Rus is in Ukraine near Kiev, language and its name — ukrainian-russian is very richer than mrussian-moscovian and nearer to the primary language — sanscritus. That is why mRussia-moscovie wants again completely destroy the source where they have stolen all and calls that directly as "denazification", that is destroying all folk's roots and transformation again to slaves with no memory — mancurts, completely as at USSR.

Fingers crossed for UA!

"roman" wrote:

They want to finish of destroying the Ukrainian-Rus culture or to clean up the national renaissance after 2014 what appeared in contrary to the Ukraine government which is in fact the mRussian occupation administration all time after the formal (not real) independence declaration 1991, due to vote constantly by the sovetiche occupation populations at the absence in the fact of the real de-occupation of USSR occupation. And that is why most Ukrainian refugees talks not on Ukrainian-Rus language, but mRussian-moscovian one and they are very bad-tempered and brutal just as mRussians.

Wait! You are saying that the part of the people who run out of UA are... core russians who lives in UA only few decades?
I didn't knew the part of the history You are describing, I think I'll have to read about it.

"roman" wrote:

"marcin" wrote:

So let it be:
echo "Hello World. Слава Україні"

Героям Слава!

Of course!

"roman" wrote:

"marcin" wrote:

ps. if there is something I can do for You please write me a prv msg.

I need no help now personally, but thanks for your proposal.

You may help Ukraine in general by transferring some funds to Its Army which is destroying the mRussian occupants now!


Could You send some link/account no? I'm not a wealthy man and I don't want to feed any company in between, but pass all the money to the army of the UA.

ps. maybe we should move to the PM style of messaging? ]]> Miscellaneous marcin Hope U R Well http://oscada.org/forum/posts///10193/ Fri, 01 Apr 2022 10:53:23 +0300 echo "Hello World. Слава Украине" And that you have wrote by the mRussian-aggressor-occupant slapper!!! Ough - sorry! I didn't thought that the language i've learnt at school (while Poland was indeed under zsrr domination) is the russian-aggressor-occupant language and because I'm not very familiar with the UA language I didn't identified it as error. Sorry again! Non "russian", but mRussian — m{oscovie|alo|ancurto}Russia — abomination, and sure, the "empire" did perform the mRussiafication process on the occupied territories-colonies, so why the Ukrainian south-east-center remain under the mRussiafication and why the refugees in Poland slap in the tongue mostly. For Ukraine and other countries of the "folks prison" this war-invasion is a chance to disintegrate the mRussian empire at the last and get the real liberty. mRussia-moscovie from about 1720 has stolen from Ukraine-Rus all: name and history — Rus is in Ukraine near Kiev, language and its name — ukrainian-russian is very richer than mrussian-moscovian and nearer to the primary language — sanscritus. That is why mRussia-moscovie wants again completely destroy the source where they have stolen all and calls that directly as "denazification", that is destroying all folk's roots and transformation again to slaves with no memory — mancurts, completely as at USSR. They want to finish of destroying the Ukrainian-Rus culture or to clean up the national renaissance after 2014 what appeared in contrary to the Ukraine government which is in fact the mRussian occupation administration all time after the formal (not real) independence declaration 1991, due to vote constantly by the sovetiche occupation populations at the absence in the fact of the real de-occupation of USSR occupation. And that is why most Ukrainian refugees talks not on Ukrainian-Rus language, but mRussian-moscovian one and they are very bad-tempered and brutal just as mRussians. So let it be: echo "Hello World. Слава Україні" Героям Слава! ps. if there is something I can do for You please write me a prv msg. I need no help now personally, but thanks for your proposal. You may help Ukraine in general by transferring some funds to Its Army which is destroying the mRussian occupants now! "marcin" wrote:

"roman" wrote:

"marcin" wrote:

echo "Hello World. Слава Украине"

And that you have wrote by the mRussian-aggressor-occupant slapper!!!

Ough - sorry! I didn't thought that the language i've learnt at school (while Poland was indeed under zsrr domination) is the russian-aggressor-occupant language and because I'm not very familiar with the UA language I didn't identified it as error. Sorry again!

Non "russian", but mRussian — m{oscovie|alo|ancurto}Russia — abomination, and sure, the "empire" did perform the mRussiafication process on the occupied territories-colonies, so why the Ukrainian south-east-center remain under the mRussiafication and why the refugees in Poland slap in the tongue mostly.

For Ukraine and other countries of the "folks prison" this war-invasion is a chance to disintegrate the mRussian empire at the last and get the real liberty. mRussia-moscovie from about 1720 has stolen from Ukraine-Rus all: name and history — Rus is in Ukraine near Kiev, language and its name — ukrainian-russian is very richer than mrussian-moscovian and nearer to the primary language — sanscritus. That is why mRussia-moscovie wants again completely destroy the source where they have stolen all and calls that directly as "denazification", that is destroying all folk's roots and transformation again to slaves with no memory — mancurts, completely as at USSR.

They want to finish of destroying the Ukrainian-Rus culture or to clean up the national renaissance after 2014 what appeared in contrary to the Ukraine government which is in fact the mRussian occupation administration all time after the formal (not real) independence declaration 1991, due to vote constantly by the sovetiche occupation populations at the absence in the fact of the real de-occupation of USSR occupation. And that is why most Ukrainian refugees talks not on Ukrainian-Rus language, but mRussian-moscovian one and they are very bad-tempered and brutal just as mRussians.

"marcin" wrote:

So let it be:
echo "Hello World. Слава Україні"

Героям Слава!

"marcin" wrote:

ps. if there is something I can do for You please write me a prv msg.

I need no help now personally, but thanks for your proposal.

You may help Ukraine in general by transferring some funds to Its Army which is destroying the mRussian occupants now! ]]> Miscellaneous roman Hope U R Well http://oscada.org/forum/posts///10190/ Thu, 31 Mar 2022 00:17:03 +0300 echo "Hello World. Слава Украине" And that you have wrote by the mRussian-aggressor-occupant slapper!!! Ough - sorry! I didn't thought that the language i've learnt at school (while Poland was indeed under zsrr domination) is the russian-aggressor-occupant language and because I'm not very familiar with the UA language I didn't identified it as error. Sorry again! In Ukrainian that writes as "Слава Україні" So let it be: echo "Hello World. Слава Україні" ps. if there is something I can do for You please write me a prv msg. "roman" wrote:

"marcin" wrote:

echo "Hello World. Слава Украине"

And that you have wrote by the mRussian-aggressor-occupant slapper!!!


Ough - sorry! I didn't thought that the language i've learnt at school (while Poland was indeed under zsrr domination) is the russian-aggressor-occupant language and because I'm not very familiar with the UA language I didn't identified it as error. Sorry again!

"roman" wrote:

In Ukrainian that writes as "Слава Україні"


So let it be:
echo "Hello World. Слава Україні"

ps. if there is something I can do for You please write me a prv msg. ]]> Miscellaneous marcin Hope U R Well http://oscada.org/forum/posts///10189/ Tue, 29 Mar 2022 07:37:01 +0300 i know I was trying to get involved in the project (which failed), but... I hope You are well!!!! Holding fingers crossed for You! I am fine, thanks. echo "Hello World. Слава Украине" And that you have wrote by the mRussian-aggressor-occupant slapper!!! In Ukrainian that writes as "Слава Україні" "marcin" wrote:

i know I was trying to get involved in the project (which failed), but... I hope You are well!!!!
Holding fingers crossed for You!

I am fine, thanks.

"marcin" wrote:

echo "Hello World. Слава Украине"

And that you have wrote by the mRussian-aggressor-occupant slapper!!!

In Ukrainian that writes as "Слава Україні" ]]> Miscellaneous roman Hope U R Well http://oscada.org/forum/posts///10187/ Tue, 29 Mar 2022 01:47:16 +0300 Hey, i know I was trying to get involved in the project (which failed), but... I hope You are well!!!! Holding fingers crossed for You! echo "Hello World. Слава Украине" BEST REGARDS!!!!
i know I was trying to get involved in the project (which failed), but... I hope You are well!!!!
Holding fingers crossed for You!

echo "Hello World. Слава Украине"

BEST REGARDS!!!! ]]> Miscellaneous marcin Any Siemens S7 simulator can be used to test openscada? http://oscada.org/forum/posts///10122/ Tue, 17 Aug 2021 10:50:00 +0300 Siemens don't provide any offical simulator for their S7 protocol. So I'm wondering if there are any free and useable siemens S7 simulator? Thank you! Why? At testing and using now with real PLC! "Tony642" wrote:

Siemens don't provide any offical simulator for their S7 protocol. So I'm wondering if there are any free and useable siemens S7 simulator? Thank you!

Why? At testing and using now with real PLC! ]]> Miscellaneous roman Any Siemens S7 simulator can be used to test openscada? http://oscada.org/forum/posts///10121/ Tue, 17 Aug 2021 04:53:55 +0300 Siemens don't provide any offical simulator for their S7 protocol. So I'm wondering if there are any free and useable siemens S7 simulator? Thank you! Miscellaneous Tony642 VCAEngine: Element 'Main' is missing! http://oscada.org/forum/posts///9551/ Wed, 13 Feb 2019 05:19:25 +0200 I added LibsDB/vcaBase.db into "DB SQLite" and click "Load the program from this DB". Now, I can enable "Graphic 2" and "el1...el8" appear. Thank you very much, Rangsarit
Thank you very much,
Rangsarit ]]> Miscellaneous rangsarit VCAEngine: Element 'Main' is missing! http://oscada.org/forum/posts///9550/ Tue, 12 Feb 2019 08:21:26 +0200 Connection of the OpenSCADA libraries, and "vcaBase.db" concrete, was not saved or those libraries are not presented in whole. See to the logs and read the HowTo Debug!
See to the logs and read the HowTo Debug! ]]> Miscellaneous roman VCAEngine: Element 'Main' is missing! http://oscada.org/forum/posts///9549/ Tue, 12 Feb 2019 04:51:26 +0200 Hello, I'm not sure what happen. I was working on the Quick Start guide at "5 Formation of the visual representation". I did create "Graphic 2" and was trying to "enable" and access "Links" tab. However, at the beginning, I didn't see the tree of element 'el1' ... 'el8' on "Links" tab. Then, I restarted my Ubuntu machine. When I started Openscada program again, it seems that the icons in the "Projects" pane looks strange and it showed "VCAEngine: Element 'Main' is missing!" when I clicked enable. What did I do wrong? Could you please help? Thank you very much, Rangsarit
I'm not sure what happen. I was working on the Quick Start guide at "5 Formation of the visual representation". I did create "Graphic 2" and was trying to "enable" and access "Links" tab. However, at the beginning, I didn't see the tree of element 'el1' ... 'el8' on "Links" tab. Then, I restarted my Ubuntu machine. When I started Openscada program again, it seems that the icons in the "Projects" pane looks strange and it showed "VCAEngine: Element 'Main' is missing!" when I clicked enable. What did I do wrong? Could you please help?

Thank you very much,
Rangsarit ]]> Miscellaneous rangsarit "Show trend" in "Value archive" not display graph http://oscada.org/forum/posts///9548/ Mon, 11 Feb 2019 11:25:30 +0200 Thank you for your fast response. I did try "apt-get install libqt4-svg" in my Ubuntu 16.04 and now the trend line is shown with the values. Thank you very much, Rangsarit
Thank you very much,
Rangsarit ]]> Miscellaneous rangsarit "Show trend" in "Value archive" not display graph http://oscada.org/forum/posts///9547/ Mon, 11 Feb 2019 09:55:48 +0200 I have been following the instruction for quick start in http://oscada.org/wiki/Documents/Quick_start#Archiving-history_of_the_TP_data. However, when I tried to use "value archive" to "show trend", the program shows that "The picture is not set". I'm not sure if I missed something. Could you please help? This archive-history has no data since not enabled for archiving by the archiver "FSArch.1s" or the Qt-plugin for SVG isn't installed. "rangsarit" wrote:

I have been following the instruction for quick start in http://oscada.org/wiki/Documents/Quick_start#Archiving-history_of_the_TP_data.

However, when I tried to use "value archive" to "show trend", the program shows that "The picture is not set". I'm not sure if I missed something. Could you please help?

This archive-history has no data since not enabled for archiving by the archiver "FSArch.1s" or the Qt-plugin for SVG isn't installed. ]]> Miscellaneous roman "Show trend" in "Value archive" not display graph http://oscada.org/forum/posts///9546/ Mon, 11 Feb 2019 08:49:45 +0200 Hello, I have been following the instruction for quick start in http://oscada.org/wiki/Documents/Quick_start#Archiving-history_of_the_TP_data. However, when I tried to use "value archive" to "show trend", the program shows that "The picture is not set". I'm not sure if I missed something. Could you please help? Thank you very much, Rangsarit
I have been following the instruction for quick start in http://oscada.org/wiki/Documents/Quick_start#Archiving-history_of_the_TP_data.

However, when I tried to use "value archive" to "show trend", the program shows that "The picture is not set". I'm not sure if I missed something. Could you please help?

Thank you very much,
Rangsarit ]]> Miscellaneous rangsarit Integration & Communication between SCADA and PLC http://oscada.org/forum/posts///9065/ Thu, 30 Nov 2017 12:52:41 +0200 Can u explain what is the important part when integration and communication between SCADA and PLC? I'm use the DL06 KOYO PLC for our project. Until now, i'm still cant integrate our PLC with SCADA system. Can u tell me what is the most important part to integrate between PLC and SCADA? How that related to OpenSCADA also? P.S. The forum exclusively about the project OpenSCADA then do not write here messages like to that! "Shawnturner" wrote:

Can u explain what is the important part when integration and communication between SCADA and PLC?

I'm use the DL06 KOYO PLC for our project. Until now, i'm still cant integrate our PLC with SCADA system.
Can u tell me what is the most important part to integrate between PLC and SCADA?

How that related to OpenSCADA also?

P.S. The forum exclusively about the project OpenSCADA then do not write here messages like to that! ]]> Miscellaneous roman Integration & Communication between SCADA and PLC http://oscada.org/forum/posts///9062/ Thu, 30 Nov 2017 12:39:03 +0200 Hi. Can u explain what is the important part when integration and communication between SCADA and PLC? I'm use the DL06 KOYO PLC for our project. Until now, i'm still cant integrate our PLC with SCADA system. Can u tell me what is the most important part to integrate between PLC and SCADA? Thanks
Can u explain what is the important part when integration and communication between SCADA and PLC?

I'm use the DL06 KOYO PLC for our project. Until now, i'm still cant integrate our PLC with SCADA system.
Can u tell me what is the most important part to integrate between PLC and SCADA?

Thanks ]]> Miscellaneous Shawnturner "Protocol of Violations" http://oscada.org/forum/posts///7879/ Sat, 26 Dec 2015 07:03:29 +0200 Thank you Roman in The photo was taken, I want to show only "DAQ.System03" in "parameter" column. how i filter "DAQ.System03" by change rule "1:al*:*"? in The photo was taken, I want to show only "DAQ.System03" in "parameter" column. how i filter "DAQ.System03" by change rule "1:al*:*"? ]]> Miscellaneous patak3000