| Author |
Message |
|
Written on: 29. 04. 2022 [12:56]
|
|
zhxyahoo
HONGXIANG ZHOU
Topic creator
registered since: 30.03.2022
Posts: 6
|
I am new to Linux system and Raspberry Pi.
try to Installing-building from the source texts on Raspberrypi 4B(Raspberry Pi OS with desktop,2022-01-28-raspios-bullseye-arm64).
The step is follows:
1. $ sudo apt-get install autoconf
2. $ sudo apt-get install libtool
3. download tar archive from /http-server http://ftp.oscada.org/OpenSCADA/
4. $ cd Downloads
5. $ tar -xvf openscada-0.9.5.tar.xz
6. $ cd opensacada-0.9.5
7. $ tar -xvf ../openscada-res-0.9.5.tar.xz
8. $ sudo apt-get install subversion
9. $ svn co http://oscada.org/svn/trunk/OpenSCADA/
10. $ cd OpenSCADA
11. $ sudo autoreconf -ivf
Then there displayed, "autoreconf: configure.ac not using Gettext"
If I go on to do the next step:
12. $ sudo ./configure
Then there displayed, "configure erroe, Some utilities of I18N gettext are not present! Install the gettext utilites package."
Please help me, how can I install the gettext utilites package? Thanks!
|
|
Written on: 29. 04. 2022 [13:08]
|
|
roman
Roman Savochenko
Moderator Contributor Developer
registered since: 12.12.2007
Posts: 3742
|
"zhxyahoo" wrote:
I am new to Linux system and Raspberry Pi.
try to Installing-building from the source texts on Raspberrypi 4B(Raspberry Pi OS with desktop,2022-01-28-raspios-bullseye-arm64).
Why?
What problems with installing the ready packages http://oscada.org/en/main/download/ you have?
"PLC: Raspberry Pi Zero,1,2,3 (Raspbian 9 ARMv6); Raspberry Pi 2,3,4 (Debian 8,9,10,11 armhf-ARMv7) ..."
And if you very want to build yourself, read the dependencies http://oscada.org/en/main/characteristics/ carefully:
"gettext A group of utilities for preparation and compilations of translations of the interface of programs on various languages in conformity with the internationalization standard I18N."
And build by the Debian tools — "dpkg-buildpackage" as that wrote in the manual "Build from source".
Learn, learn and learn better than work, work and work.
|
|
Written on: 29. 04. 2022 [13:23]
|
|
zhxyahoo
HONGXIANG ZHOU
Topic creator
registered since: 30.03.2022
Posts: 6
|
I did according the following link, "How to/Build from source",
http://oscada.org/wiki/Documents/How_to/Build_from_source
It‘s not "Install OpenSCADA from ready-made packages".
Is something wrong or missing?
|
|
Written on: 29. 04. 2022 [14:25]
|
|
zhxyahoo
HONGXIANG ZHOU
Topic creator
registered since: 30.03.2022
Posts: 6
|
I also tried to Install OpenSCADA from ready-made packages as following step:
1: edit the /etc/apt/sources.list file by inserting one line:add "deb http://ftp.oscada.org/Debian/11/openscada ./
2. Adding the signature verification key (the authenticity) of the repository and packages in it (not necessarily and not in all repositories): $ sudo wget -O - http://ftp.oscada.org/Misc/pkgSignKey | sudo apt-key add -
3. $ sudo apt-get update
4. $ sudo apt-get install openscada-model-aglks
Then display:
Attachment
Openscada1.jpg (File type: image/jpeg, Size: 189.53 kilobytes) — 529 downloads
|
|
Written on: 29. 04. 2022 [14:31]
|
|
roman
Roman Savochenko
Moderator Contributor Developer
registered since: 12.12.2007
Posts: 3742
|
"zhxyahoo" wrote:
It‘s not "Install OpenSCADA from ready-made packages".
Is something wrong or missing?
Debian-based distributions — DEB packages
Learn, learn and learn better than work, work and work.
|
|
Written on: 29. 04. 2022 [14:39]
|
|
roman
Roman Savochenko
Moderator Contributor Developer
registered since: 12.12.2007
Posts: 3742
|
"zhxyahoo" wrote:
4. $ sudo apt-get install openscada-model-aglks
ARMHF is not ARM64, so use 2022-04-04-raspios-bullseye-armhf (Raspberry Pi OS)
Learn, learn and learn better than work, work and work.
|
|
Written on: 29. 04. 2022 [14:51]
|
|
zhxyahoo
HONGXIANG ZHOU
Topic creator
registered since: 30.03.2022
Posts: 6
|
Download link:
https://www.raspberrypi.com/software/operating-systems/#raspberry-pi-os-64-bit
After click and download, the file name is "2022-04-04-raspios-bullseye-arm64.img". It's not "2022-04-04-raspios-bullseye-armhf.img".
|
|
Written on: 29. 04. 2022 [14:58]
|
|
roman
Roman Savochenko
Moderator Contributor Developer
registered since: 12.12.2007
Posts: 3742
|
https://downloads.raspberrypi.org/raspios_armhf/images/raspios_armhf-2022-04-07/2022-04-04-raspios-bullseye-armhf.img.xz
Learn, learn and learn better than work, work and work.
|
|
Written on: 29. 04. 2022 [15:01]
|
|
zhxyahoo
HONGXIANG ZHOU
Topic creator
registered since: 30.03.2022
Posts: 6
|
Ok, I see. It's 32bit system with desktop, it means that OpenSCADA is not support OS-64bit, right?
|
|
Written on: 29. 04. 2022 [15:06]
|
|
roman
Roman Savochenko
Moderator Contributor Developer
registered since: 12.12.2007
Posts: 3742
|
"zhxyahoo" wrote:
Ok, I see. It's 32bit system with desktop, it means that OpenSCADA is not support OS-64bit, right?
It means there is no ready build for ARM64.
P.S. The free support from Roman Savochenko is exhausted for you (... can response five(5) and for newbies ...), then here will no reply more from him!
Learn, learn and learn better than work, work and work.
|
